Commit 96320519 authored by Jean Delvare's avatar Jean Delvare Committed by Greg Kroah-Hartman

[PATCH] hwmon: w83792d fix unused fan pins

1. This patch add check for fan4,5,6,7 and do not create device file
   if their pins are not configured as fan.
2. Fix the issue that can not set fan divisor to 128.
3. Fix the index out of bounds bug in w83792d_detect function.
Signed-off-by: default avatarYuan Mu <ymu@winbond.com.tw>
Signed-off-by: default avatarJean Delvare <khali@linux-fr.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
parent d2ef5ebb
......@@ -193,6 +193,7 @@ static const u8 W83792D_REG_LEVELS[3][4] = {
0xE2 } /* (bit3-0) SmartFanII: Fan3 Level 3 */
};
#define W83792D_REG_GPIO_EN 0x1A
#define W83792D_REG_CONFIG 0x40
#define W83792D_REG_VID_FANDIV 0x47
#define W83792D_REG_CHIPID 0x49
......@@ -257,7 +258,7 @@ DIV_TO_REG(long val)
{
int i;
val = SENSORS_LIMIT(val, 1, 128) >> 1;
for (i = 0; i < 6; i++) {
for (i = 0; i < 7; i++) {
if (val == 0)
break;
val >>= 1;
......@@ -1282,8 +1283,8 @@ w83792d_detect(struct i2c_adapter *adapter, int address, int kind)
w83792d_init_client(new_client);
/* A few vars need to be filled upon startup */
for (i = 1; i <= 7; i++) {
data->fan_min[i - 1] = w83792d_read_value(new_client,
for (i = 0; i < 7; i++) {
data->fan_min[i] = w83792d_read_value(new_client,
W83792D_REG_FAN_MIN[i]);
}
......@@ -1306,9 +1307,19 @@ w83792d_detect(struct i2c_adapter *adapter, int address, int kind)
device_create_file_fan(new_client, 1);
device_create_file_fan(new_client, 2);
device_create_file_fan(new_client, 3);
/* Read GPIO enable register to check if pins for fan 4,5 are used as
GPIO */
val1 = w83792d_read_value(new_client, W83792D_REG_GPIO_EN);
if (!(val1 & 0x40))
device_create_file_fan(new_client, 4);
if (!(val1 & 0x20))
device_create_file_fan(new_client, 5);
val1 = w83792d_read_value(new_client, W83792D_REG_PIN);
if (val1 & 0x40)
device_create_file_fan(new_client, 6);
if (val1 & 0x04)
device_create_file_fan(new_client, 7);
device_create_file_temp1(new_client); /* Temp1 */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment