[SPARC64]: SUN4U PCI-E controller support.

Some minor refactoring in the generic code was necessary for
this:

1) This controller requires 8-byte access to the interrupt map
   and clear register.  They are 64-bits on all the other
   SBUS and PCI controllers anyways, so this was easy to cure.

2) The IMAP register has a different layout and some bits that we
   need to preserve, so use a read/modify/write when making
   changes to the IMAP register in generic code.

3) Flushing the entire IOMMU TLB is best done with a single write
   to a register on this PCI controller, add a iommu->iommu_flushinv
   for this.

Still lacks MSI support, that will come later.
Signed-off-by: David S. Miller <davem@davemloft.net>

arch/sparc64/kernel/Makefile

@@ -17,7 +17,7 @@ obj-y		:= process.o setup.o cpu.o idprom.o \
 obj-$(CONFIG_STACKTRACE) += stacktrace.o
 obj-$(CONFIG_PCI)	 += ebus.o isa.o pci_common.o pci_iommu.o \
 			    pci_psycho.o pci_sabre.o pci_schizo.o \
-			    pci_sun4v.o pci_sun4v_asm.o
+			    pci_sun4v.o pci_sun4v_asm.o pci_fire.o
 obj-$(CONFIG_SMP)	 += smp.o trampoline.o
 obj-$(CONFIG_SPARC32_COMPAT) += sys32.o sys_sparc32.o signal32.o
 obj-$(CONFIG_BINFMT_ELF32) += binfmt_elf32.o

arch/sparc64/kernel/irq.c

@@ -279,7 +279,7 @@ static void sun4u_irq_enable(unsigned int virt_irq)
 	struct irq_handler_data *data = get_irq_chip_data(virt_irq);
 
 	if (likely(data)) {
-		unsigned long cpuid, imap;
+		unsigned long cpuid, imap, val;
 		unsigned int tid;
 
 		cpuid = irq_choose_cpu(virt_irq);
@@ -287,7 +287,11 @@ static void sun4u_irq_enable(unsigned int virt_irq)
 
 		tid = sun4u_compute_tid(imap, cpuid);
 
-		upa_writel(tid | IMAP_VALID, imap);
+		val = upa_readq(imap);
+		val &= ~(IMAP_TID_UPA | IMAP_TID_JBUS |
+			 IMAP_AID_SAFARI | IMAP_NID_SAFARI);
+		val |= tid | IMAP_VALID;
+		upa_writeq(val, imap);
 	}
 }
 
@@ -297,10 +301,10 @@ static void sun4u_irq_disable(unsigned int virt_irq)
 
 	if (likely(data)) {
 		unsigned long imap = data->imap;
-		u32 tmp = upa_readl(imap);
+		u32 tmp = upa_readq(imap);
 
 		tmp &= ~IMAP_VALID;
-		upa_writel(tmp, imap);
+		upa_writeq(tmp, imap);
 	}
 }
 
@@ -309,7 +313,7 @@ static void sun4u_irq_end(unsigned int virt_irq)
 	struct irq_handler_data *data = get_irq_chip_data(virt_irq);
 
 	if (likely(data))
-		upa_writel(ICLR_IDLE, data->iclr);
+		upa_writeq(ICLR_IDLE, data->iclr);
 }
 
 static void sun4v_irq_enable(unsigned int virt_irq)
@@ -465,7 +469,7 @@ unsigned int build_irq(int inofixup, unsigned long iclr, unsigned long imap)
 
 	BUG_ON(tlb_type == hypervisor);
 
-	ino = (upa_readl(imap) & (IMAP_IGN | IMAP_INO)) + inofixup;
+	ino = (upa_readq(imap) & (IMAP_IGN | IMAP_INO)) + inofixup;
 	bucket = &ivector_table[ino];
 	if (!bucket->virt_irq) {
 		bucket->virt_irq = virt_irq_alloc(__irq(bucket));

arch/sparc64/kernel/pci.c

@@ -190,6 +190,7 @@ extern void schizo_init(struct device_node *, const char *);
 extern void schizo_plus_init(struct device_node *, const char *);
 extern void tomatillo_init(struct device_node *, const char *);
 extern void sun4v_pci_init(struct device_node *, const char *);
+extern void fire_pci_init(struct device_node *, const char *);
 
 static struct {
 	char *model_name;
@@ -207,6 +208,7 @@ static struct {
 	{ "SUNW,tomatillo", tomatillo_init },
 	{ "pci108e,a801", tomatillo_init },
 	{ "SUNW,sun4v-pci", sun4v_pci_init },
+	{ "pciex108e,80f0", fire_pci_init },
 };
 #define PCI_NUM_CONTROLLER_TYPES (sizeof(pci_controller_table) / \
 				  sizeof(pci_controller_table[0]))
@@ -436,6 +438,13 @@ struct pci_dev *of_create_pci_dev(struct pci_pbm_info *pbm,
 	printk("    class: 0x%x device name: %s\n",
 	       dev->class, pci_name(dev));
 
+	/* I have seen IDE devices which will not respond to
+	 * the bmdma simplex check reads if bus mastering is
+	 * disabled.
+	 */
+	if ((dev->class >> 8) == PCI_CLASS_STORAGE_IDE)
+		pci_set_master(dev);
+
 	dev->current_state = 4;		/* unknown power state */
 	dev->error_state = pci_channel_io_normal;
 

arch/sparc64/kernel/pci_iommu.c

@@ -37,6 +37,9 @@
 /* Must be invoked under the IOMMU lock. */
 static void __iommu_flushall(struct iommu *iommu)
 {
+	if (iommu->iommu_flushinv) {
+		pci_iommu_write(iommu->iommu_flushinv, ~(u64)0);
+	} else {
 		unsigned long tag;
 		int entry;
 
@@ -48,6 +51,7 @@ static void __iommu_flushall(struct iommu *iommu)
 
 		/* Ensure completion of previous PIO writes. */
 		(void) pci_iommu_read(iommu->write_complete_reg);
+	}
 }
 
 #define IOPTE_CONSISTENT(CTX) \

arch/sparc64/kernel/prom.c

@@ -386,11 +386,9 @@ static unsigned int psycho_irq_build(struct device_node *dp,
 
 	/* Now build the IRQ bucket. */
 	imap = controller_regs + imap_off;
-	imap += 4;
 
 	iclr_off = psycho_iclr_offset(ino);
 	iclr = controller_regs + iclr_off;
-	iclr += 4;
 
 	if ((ino & 0x20) == 0)
 		inofixup = ino & 0x03;
@@ -613,11 +611,9 @@ static unsigned int sabre_irq_build(struct device_node *dp,
 
 	/* Now build the IRQ bucket. */
 	imap = controller_regs + imap_off;
-	imap += 4;
 
 	iclr_off = sabre_iclr_offset(ino);
 	iclr = controller_regs + iclr_off;
-	iclr += 4;
 
 	if ((ino & 0x20) == 0)
 		inofixup = ino & 0x03;
@@ -679,13 +675,14 @@ static unsigned long schizo_iclr_offset(unsigned long ino)
 static unsigned long schizo_ino_to_iclr(unsigned long pbm_regs,
 					unsigned int ino)
 {
-	return pbm_regs + schizo_iclr_offset(ino) + 4;
+
+	return pbm_regs + schizo_iclr_offset(ino);
 }
 
 static unsigned long schizo_ino_to_imap(unsigned long pbm_regs,
 					unsigned int ino)
 {
-	return pbm_regs + schizo_imap_offset(ino) + 4;
+	return pbm_regs + schizo_imap_offset(ino);
 }
 
 #define schizo_read(__reg) \
@@ -848,6 +845,85 @@ static void pci_sun4v_irq_trans_init(struct device_node *dp)
 	dp->irq_trans->data = (void *) (unsigned long)
 		((regs->phys_addr >> 32UL) & 0x0fffffff);
 }
+
+struct fire_irq_data {
+	unsigned long pbm_regs;
+	u32 portid;
+};
+
+#define FIRE_IMAP_BASE	0x001000
+#define FIRE_ICLR_BASE	0x001400
+
+static unsigned long fire_imap_offset(unsigned long ino)
+{
+	return FIRE_IMAP_BASE + (ino * 8UL);
+}
+
+static unsigned long fire_iclr_offset(unsigned long ino)
+{
+	return FIRE_ICLR_BASE + (ino * 8UL);
+}
+
+static unsigned long fire_ino_to_iclr(unsigned long pbm_regs,
+					    unsigned int ino)
+{
+	return pbm_regs + fire_iclr_offset(ino);
+}
+
+static unsigned long fire_ino_to_imap(unsigned long pbm_regs,
+					    unsigned int ino)
+{
+	return pbm_regs + fire_imap_offset(ino);
+}
+
+static unsigned int fire_irq_build(struct device_node *dp,
+					 unsigned int ino,
+					 void *_data)
+{
+	struct fire_irq_data *irq_data = _data;
+	unsigned long pbm_regs = irq_data->pbm_regs;
+	unsigned long imap, iclr;
+	unsigned long int_ctrlr;
+
+	ino &= 0x3f;
+
+	/* Now build the IRQ bucket. */
+	imap = fire_ino_to_imap(pbm_regs, ino);
+	iclr = fire_ino_to_iclr(pbm_regs, ino);
+
+	/* Set the interrupt controller number.  */
+	int_ctrlr = 1 << 6;
+	upa_writeq(int_ctrlr, imap);
+
+	/* The interrupt map registers do not have an INO field
+	 * like other chips do.  They return zero in the INO
+	 * field, and the interrupt controller number is controlled
+	 * in bits 6 thru 9.  So in order for build_irq() to get
+	 * the INO right we pass it in as part of the fixup
+	 * which will get added to the map register zero value
+	 * read by build_irq().
+	 */
+	ino |= (irq_data->portid << 6);
+	ino -= int_ctrlr;
+	return build_irq(ino, iclr, imap);
+}
+
+static void fire_irq_trans_init(struct device_node *dp)
+{
+	const struct linux_prom64_registers *regs;
+	struct fire_irq_data *irq_data;
+
+	dp->irq_trans = prom_early_alloc(sizeof(struct of_irq_controller));
+	dp->irq_trans->irq_build = fire_irq_build;
+
+	irq_data = prom_early_alloc(sizeof(struct fire_irq_data));
+
+	regs = of_get_property(dp, "reg", NULL);
+	dp->irq_trans->data = irq_data;
+
+	irq_data->pbm_regs = regs[0].phys_addr;
+	irq_data->portid = of_getintprop_default(dp, "portid", 0);
+}
 #endif /* CONFIG_PCI */
 
 #ifdef CONFIG_SBUS
@@ -1069,6 +1145,7 @@ static struct irq_trans pci_irq_trans_table[] = {
 	{ "SUNW,tomatillo", tomatillo_irq_trans_init },
 	{ "pci108e,a801", tomatillo_irq_trans_init },
 	{ "SUNW,sun4v-pci", pci_sun4v_irq_trans_init },
+	{ "pciex108e,80f0", fire_irq_trans_init },
 };
 #endif
 

include/asm-sparc64/iommu.h

@@ -32,6 +32,7 @@ struct iommu {
 	unsigned long		iommu_control;
 	unsigned long		iommu_tsbbase;
 	unsigned long		iommu_flush;
+	unsigned long		iommu_flushinv;
 	unsigned long		iommu_ctxflush;
 	unsigned long		write_complete_reg;
 	unsigned long		dummy_page;