Commit 82130841 authored by Russell King's avatar Russell King Committed by Russell King

Merge NetSilicon NS93xx tree

Fixed conflicts:

	arch/arm/Makefile
	arch/arm/mm/Kconfig
Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
parents 66822b2e b77bfa84
......@@ -271,6 +271,14 @@ config ARCH_L7200
If you have any questions or comments about the Linux kernel port
to this board, send e-mail to <sjhill@cotw.com>.
config ARCH_NS9XXX
bool "NetSilicon NS9xxx"
help
Say Y here if you intend to run this kernel on a NetSilicon NS9xxx
System.
<http://www.digi.com/products/microprocessors/index.jsp>
config ARCH_PNX4008
bool "Philips Nexperia PNX4008 Mobile"
help
......@@ -391,6 +399,8 @@ source "arch/arm/mach-at91/Kconfig"
source "arch/arm/mach-netx/Kconfig"
source "arch/arm/mach-ns9xxx/Kconfig"
# Definitions to make life easier
config ARCH_ACORN
bool
......
......@@ -124,10 +124,12 @@ endif
machine-$(CONFIG_ARCH_H720X) := h720x
machine-$(CONFIG_ARCH_AAEC2000) := aaec2000
machine-$(CONFIG_ARCH_REALVIEW) := realview
machine-$(CONFIG_ARCH_AT91) := at91
machine-$(CONFIG_ARCH_AT91) := at91rm9200
machine-$(CONFIG_ARCH_EP93XX) := ep93xx
machine-$(CONFIG_ARCH_PNX4008) := pnx4008
machine-$(CONFIG_ARCH_NETX) := netx
machine-$(CONFIG_ARCH_NS9XXX) := ns9xxx
textofs-$(CONFIG_ARCH_NS9XXX) := 0x00108000
ifeq ($(CONFIG_ARCH_EBSA110),y)
# This is what happens if you forget the IOCS16 line.
......
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.20
# Thu Feb 15 20:51:47 2007
#
CONFIG_ARM=y
# CONFIG_GENERIC_TIME is not set
CONFIG_MMU=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_IPC_NS is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_UTS_NS is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
# CONFIG_VM_EVENT_COUNTERS is not set
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_KMOD=y
#
# Block layer
#
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
#
# System Type
#
# CONFIG_ARCH_AAEC2000 is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_IXP23XX is not set
# CONFIG_ARCH_L7200 is not set
CONFIG_ARCH_NS9XXX=y
# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_OMAP is not set
#
# NS9xxx Implementations
#
CONFIG_MACH_CC9P9360DEV=y
CONFIG_PROCESSOR_NS9360=y
CONFIG_BOARD_A9M9750DEV=y
#
# Processor Type
#
CONFIG_CPU_32=y
CONFIG_CPU_ARM926T=y
CONFIG_CPU_32v5=y
CONFIG_CPU_ABRT_EV5TJ=y
CONFIG_CPU_CACHE_VIVT=y
CONFIG_CPU_COPY_V4WB=y
CONFIG_CPU_TLB_V4WBI=y
CONFIG_CPU_CP15=y
CONFIG_CPU_CP15_MMU=y
#
# Processor Features
#
# CONFIG_ARM_THUMB is not set
# CONFIG_CPU_ICACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
#
# Bus support
#
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
#
# Kernel Features
#
# CONFIG_PREEMPT is not set
# CONFIG_NO_IDLE_HZ is not set
CONFIG_HZ=100
# CONFIG_AEABI is not set
# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4096
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ALIGNMENT_TRAP=y
#
# Boot options
#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE=""
# CONFIG_XIP_KERNEL is not set
#
# Floating point emulation
#
#
# At least one emulation must be selected
#
CONFIG_FPE_NWFPE=y
# CONFIG_FPE_NWFPE_XP is not set
# CONFIG_FPE_FASTFPE is not set
# CONFIG_VFP is not set
#
# Userspace binary formats
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_ARTHUR is not set
#
# Power management options
#
# CONFIG_PM is not set
# CONFIG_APM is not set
#
# Networking
#
# CONFIG_NET is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
#
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
#
# Plug and Play support
#
#
# Block devices
#
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CDROM_PKTCDVD is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_NETLINK is not set
#
# Serial ATA (prod) and Parallel ATA (experimental) drivers
#
# CONFIG_ATA is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
#
# I2O device support
#
#
# ISDN subsystem
#
#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
#
# Userland interfaces
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
# CONFIG_SERIO_SERPORT is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
# CONFIG_SERIAL_8250_MANY_PORTS is not set
# CONFIG_SERIAL_8250_SHARE_IRQ is not set
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
# CONFIG_SERIAL_8250_RSA is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
#
# I2C support
#
# CONFIG_I2C is not set
#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# Hardware Monitoring support
#
# CONFIG_HWMON is not set
# CONFIG_HWMON_VID is not set
#
# Misc devices
#
# CONFIG_TIFM_CORE is not set
#
# LED devices
#
# CONFIG_NEW_LEDS is not set
#
# LED drivers
#
#
# LED Triggers
#
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# Digital Video Broadcasting Devices
#
#
# Graphics support
#
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB is not set
#
# Console display driver support
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
#
# CONFIG_SOUND is not set
#
# HID Devices
#
CONFIG_HID=y
#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB_ARCH_HAS_OHCI is not set
# CONFIG_USB_ARCH_HAS_EHCI is not set
# CONFIG_USB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# Real Time Clock
#
CONFIG_RTC_LIB=y
# CONFIG_RTC_CLASS is not set
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4DEV_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
# CONFIG_DNOTIFY is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
#
# Native Language Support
#
# CONFIG_NLS is not set
#
# Profiling support
#
# CONFIG_PROFILING is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
# CONFIG_ENABLE_MUST_CHECK is not set
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_DETECT_SOFTLOCKUP is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_RWSEMS is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
CONFIG_FRAME_POINTER=y
CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_ERRORS=y
CONFIG_DEBUG_LL=y
CONFIG_DEBUG_ICEDCC=y
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
# CONFIG_CRYPTO is not set
#
# Library routines
#
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC32 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_PLIST=y
CONFIG_IOMAP_COPY=y
if ARCH_NS9XXX
menu "NS9xxx Implementations"
config MACH_CC9P9360DEV
bool "Connect Core 9P 9360 on an A9M9750 Devboard"
select PROCESSOR_NS9360
select BOARD_A9M9750DEV
help
Say Y here if you are using the Digi Connect Core 9P 9360
on an A9M9750 Development Board.
config PROCESSOR_NS9360
bool
config BOARD_A9M9750DEV
bool
endmenu
endif
obj-y := irq.o time.o generic.o
obj-$(CONFIG_MACH_CC9P9360DEV) += mach-cc9p9360dev.o
obj-$(CONFIG_BOARD_A9M9750DEV) += board-a9m9750dev.o
zreladdr-y := 0x108000
params_phys-y := 0x100
/*
* arch/arm/mach-ns9xxx/board-a9m9750dev.c
*
* Copyright (C) 2006,2007 by Digi International Inc.
* All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*/
#include <linux/platform_device.h>
#include <linux/serial_8250.h>
#include <linux/irq.h>
#include <asm/mach/map.h>
#include <asm/arch-ns9xxx/board.h>
#include <asm/arch-ns9xxx/regs-sys.h>
#include <asm/arch-ns9xxx/regs-mem.h>
#include <asm/arch-ns9xxx/regs-bbu.h>
#include <asm/arch-ns9xxx/regs-board-a9m9750dev.h>
#include "board-a9m9750dev.h"
static struct map_desc board_a9m9750dev_io_desc[] __initdata = {
{ /* FPGA on CS0 */
.virtual = io_p2v(NS9XXX_CSxSTAT_PHYS(0)),
.pfn = __phys_to_pfn(NS9XXX_CSxSTAT_PHYS(0)),
.length = NS9XXX_CS0STAT_LENGTH,
.type = MT_DEVICE,
},
};
void __init board_a9m9750dev_map_io(void)
{
iotable_init(board_a9m9750dev_io_desc,
ARRAY_SIZE(board_a9m9750dev_io_desc));
}
static void a9m9750dev_fpga_ack_irq(unsigned int irq)
{
/* nothing */
}
static void a9m9750dev_fpga_mask_irq(unsigned int irq)
{
FPGA_IER &= ~(1 << (irq - FPGA_IRQ(0)));
}
static void a9m9750dev_fpga_maskack_irq(unsigned int irq)
{
a9m9750dev_fpga_mask_irq(irq);
a9m9750dev_fpga_ack_irq(irq);
}
static void a9m9750dev_fpga_unmask_irq(unsigned int irq)
{
FPGA_IER |= 1 << (irq - FPGA_IRQ(0));
}
static struct irq_chip a9m9750dev_fpga_chip = {
.ack = a9m9750dev_fpga_ack_irq,
.mask = a9m9750dev_fpga_mask_irq,
.mask_ack = a9m9750dev_fpga_maskack_irq,
.unmask = a9m9750dev_fpga_unmask_irq,
};
static void a9m9750dev_fpga_demux_handler(unsigned int irq,
struct irq_desc *desc)
{
int stat = FPGA_ISR;
while (stat != 0) {
int irqno = fls(stat) - 1;
stat &= ~(1 << irqno);
desc = irq_desc + FPGA_IRQ(irqno);
desc_handle_irq(irqno, desc);
}
}
void __init board_a9m9750dev_init_irq(void)
{
u32 reg;
int i;
/*
* configure gpio for IRQ_EXT2
* use GPIO 11, because GPIO 32 is used for the LCD
*/
/* XXX: proper GPIO handling */
BBU_GC(2) &= ~0x2000;
for (i = FPGA_IRQ(0); i <= FPGA_IRQ(7); ++i) {
set_irq_chip(i, &a9m9750dev_fpga_chip);
set_irq_handler(i, handle_level_irq);
set_irq_flags(i, IRQF_VALID);
}
/* IRQ_EXT2: level sensitive + active low */
reg = SYS_EIC(2);
REGSET(reg, SYS_EIC, PLTY, AL);
REGSET(reg, SYS_EIC, LVEDG, LEVEL);
SYS_EIC(2) = reg;
set_irq_chained_handler(IRQ_EXT2,
a9m9750dev_fpga_demux_handler);
}
static struct plat_serial8250_port board_a9m9750dev_serial8250_port[] = {
{
.iobase = FPGA_UARTA_BASE,
.membase = (unsigned char*)FPGA_UARTA_BASE,
.mapbase = FPGA_UARTA_BASE,
.irq = IRQ_FPGA_UARTA,
.iotype = UPIO_MEM,
.uartclk = 18432000,
.regshift = 0,
.flags = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ,
}, {
.iobase = FPGA_UARTB_BASE,
.membase = (unsigned char*)FPGA_UARTB_BASE,
.mapbase = FPGA_UARTB_BASE,
.irq = IRQ_FPGA_UARTB,
.iotype = UPIO_MEM,
.uartclk = 18432000,
.regshift = 0,
.flags = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ,
}, {
.iobase = FPGA_UARTC_BASE,
.membase = (unsigned char*)FPGA_UARTC_BASE,
.mapbase = FPGA_UARTC_BASE,
.irq = IRQ_FPGA_UARTC,
.iotype = UPIO_MEM,
.uartclk = 18432000,
.regshift = 0,
.flags = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ,
}, {
.iobase = FPGA_UARTD_BASE,
.membase = (unsigned char*)FPGA_UARTD_BASE,
.mapbase = FPGA_UARTD_BASE,
.irq = IRQ_FPGA_UARTD,
.iotype = UPIO_MEM,
.uartclk = 18432000,
.regshift = 0,
.flags = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ,
}, {
/* end marker */
},
};
static struct platform_device board_a9m9750dev_serial_device = {
.name = "serial8250",
.dev = {
.platform_data = board_a9m9750dev_serial8250_port,
},
};
static struct platform_device *board_a9m9750dev_devices[] __initdata = {
&board_a9m9750dev_serial_device,
};
void __init board_a9m9750dev_init_machine(void)
{
u32 reg;
/* setup static CS0: memory base ... */
REGSETIM(SYS_SMCSSMB(0), SYS_SMCSSMB, CSxB,
NS9XXX_CSxSTAT_PHYS(0) >> 12);
/* ... and mask */
reg = SYS_SMCSSMM(0);
REGSETIM(reg, SYS_SMCSSMM, CSxM, 0xfffff);
REGSET(reg, SYS_SMCSSMM, CSEx, EN);
SYS_SMCSSMM(0) = reg;
/* setup static CS0: memory configuration */
reg = MEM_SMC(0);
REGSET(reg, MEM_SMC, WSMC, OFF);
REGSET(reg, MEM_SMC, BSMC, OFF);
REGSET(reg, MEM_SMC, EW, OFF);
REGSET(reg, MEM_SMC, PB, 1);
REGSET(reg, MEM_SMC, PC, AL);
REGSET(reg, MEM_SMC, PM, DIS);
REGSET(reg, MEM_SMC, MW, 8);
MEM_SMC(0) = reg;
/* setup static CS0: timing */
MEM_SMWED(0) = 0x2;
MEM_SMOED(0) = 0x2;
MEM_SMRD(0) = 0x6;
MEM_SMWD(0) = 0x6;
platform_add_devices(board_a9m9750dev_devices,
ARRAY_SIZE(board_a9m9750dev_devices));
}
/*
* arch/arm/mach-ns9xxx/board-a9m9750dev.h
*
* Copyright (C) 2006 by Digi International Inc.
* All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*/
#include <linux/init.h>
void __init board_a9m9750dev_map_io(void);
void __init board_a9m9750dev_init_machine(void);
void __init board_a9m9750dev_init_irq(void);
/*
* arch/arm/mach-ns9xxx/generic.c
*
* Copyright (C) 2006 by Digi International Inc.
* All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <asm/memory.h>
#include <asm/page.h>
#include <asm/mach-types.h>
#include <asm/mach/map.h>
#include <asm/arch-ns9xxx/regs-sys.h>
#include <asm/arch-ns9xxx/regs-mem.h>
#include <asm/arch-ns9xxx/board.h>
static struct map_desc standard_io_desc[] __initdata = {
{ /* BBus */
.virtual = io_p2v(0x90000000),
.pfn = __phys_to_pfn(0x90000000),
.length = 0x00700000,
.type = MT_DEVICE,
}, { /* AHB */
.virtual = io_p2v(0xa0100000),
.pfn = __phys_to_pfn(0xa0100000),
.length = 0x00900000,
.type = MT_DEVICE,
},
};
void __init ns9xxx_map_io(void)
{
iotable_init(standard_io_desc, ARRAY_SIZE(standard_io_desc));
}
void __init ns9xxx_init_machine(void)
{
}
/*
* arch/arm/mach-ns9xxx/generic.h
*
* Copyright (C) 2006 by Digi International Inc.
* All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*/
#include <linux/time.h>
#include <asm/mach/time.h>
#include <linux/init.h>
void __init ns9xxx_init_irq(void);
void __init ns9xxx_map_io(void);
void __init ns9xxx_init_machine(void);
extern struct sys_timer ns9xxx_timer;
/*
* arch/arm/mach-ns9xxx/irq.c
*
* Copyright (C) 2006,2007 by Digi International Inc.
* All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*/
#include <linux/interrupt.h>
#include <asm/mach/irq.h>
#include <asm/mach-types.h>
#include <asm/arch-ns9xxx/regs-sys.h>
#include <asm/arch-ns9xxx/irqs.h>
#include <asm/arch-ns9xxx/board.h>
#include "generic.h"
static void ns9xxx_ack_irq_timer(unsigned int irq)
{
u32 tc = SYS_TC(irq - IRQ_TIMER0);
REGSET(tc, SYS_TCx, INTC, SET);
SYS_TC(irq - IRQ_TIMER0) = tc;
REGSET(tc, SYS_TCx, INTC, UNSET);
SYS_TC(irq - IRQ_TIMER0) = tc;
}
void (*ns9xxx_ack_irq_functions[NR_IRQS])(unsigned int) = {
[IRQ_TIMER0] = ns9xxx_ack_irq_timer,
[IRQ_TIMER1] = ns9xxx_ack_irq_timer,
[IRQ_TIMER2] = ns9xxx_ack_irq_timer,
[IRQ_TIMER3] = ns9xxx_ack_irq_timer,
};
static void ns9xxx_mask_irq(unsigned int irq)
{
/* XXX: better use cpp symbols */
SYS_IC(irq / 4) &= ~(1 << (7 + 8 * (3 - (irq & 3))));
}
static void ns9xxx_ack_irq(unsigned int irq)
{
if (!ns9xxx_ack_irq_functions[irq]) {
printk(KERN_ERR "no ack function for irq %u\n", irq);
BUG();
}
ns9xxx_ack_irq_functions[irq](irq);
SYS_ISRADDR = 0;
}
static void ns9xxx_maskack_irq(unsigned int irq)
{
ns9xxx_mask_irq(irq);
ns9xxx_ack_irq(irq);
}
static void ns9xxx_unmask_irq(unsigned int irq)
{
/* XXX: better use cpp symbols */
SYS_IC(irq / 4) |= 1 << (7 + 8 * (3 - (irq & 3)));
}
static struct irq_chip ns9xxx_chip = {
.ack = ns9xxx_ack_irq,
.mask = ns9xxx_mask_irq,
.mask_ack = ns9xxx_maskack_irq,
.unmask = ns9xxx_unmask_irq,
};
void __init ns9xxx_init_irq(void)
{
int i;
/* disable all IRQs */
for (i = 0; i < 8; ++i)
SYS_IC(i) = (4 * i) << 24 | (4 * i + 1) << 16 |
(4 * i + 2) << 8 | (4 * i + 3);
/* simple interrupt prio table:
* prio(x) < prio(y) <=> x < y
*/
for (i = 0; i < 32; ++i)
SYS_IVA(i) = i;
for (i = IRQ_WATCHDOG; i <= IRQ_EXT3; ++i) {
set_irq_chip(i, &ns9xxx_chip);
set_irq_handler(i, handle_level_irq);
set_irq_flags(i, IRQF_VALID);
}
}
/*
* arch/arm/mach-ns9xxx/mach-cc9p9360dev.c
*
* Copyright (C) 2006 by Digi International Inc.
* All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*/
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
#include "board-a9m9750dev.h"
#include "generic.h"
static void __init mach_cc9p9360dev_map_io(void)
{
ns9xxx_map_io();
board_a9m9750dev_map_io();
}
static void __init mach_cc9p9360dev_init_irq(void)
{
ns9xxx_init_irq();
board_a9m9750dev_init_irq();
}
static void __init mach_cc9p9360dev_init_machine(void)
{
ns9xxx_init_machine();
board_a9m9750dev_init_machine();
}
MACHINE_START(CC9P9360DEV, "Connect Core 9P 9360 on an A9M9750 Devboard")
.map_io = mach_cc9p9360dev_map_io,
.init_irq = mach_cc9p9360dev_init_irq,
.init_machine = mach_cc9p9360dev_init_machine,
.timer = &ns9xxx_timer,
.boot_params = 0x100,
MACHINE_END
/*
* arch/arm/mach-ns9xxx/time.c
*
* Copyright (C) 2006 by Digi International Inc.
* All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*/
#include <linux/jiffies.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <asm/arch-ns9xxx/regs-sys.h>
#include <asm/arch-ns9xxx/clock.h>
#include <asm/arch-ns9xxx/irqs.h>
#include <asm/arch/system.h>
#include "generic.h"
#define TIMERCLOCKSELECT 64
static u32 usecs_per_tick;
static irqreturn_t
ns9xxx_timer_interrupt(int irq, void *dev_id)
{
write_seqlock(&xtime_lock);
timer_tick();
write_sequnlock(&xtime_lock);
return IRQ_HANDLED;
}
static unsigned long ns9xxx_timer_gettimeoffset(void)
{
/* return the microseconds which have passed since the last interrupt
* was _serviced_. That is, if an interrupt is pending or the counter
* reloads, return one periode more. */
u32 counter1 = SYS_TR(0);
int pending = SYS_ISR & (1 << IRQ_TIMER0);
u32 counter2 = SYS_TR(0);
u32 elapsed;
if (pending || counter2 > counter1)
elapsed = 2 * SYS_TRC(0) - counter2;
else
elapsed = SYS_TRC(0) - counter1;
return (elapsed * usecs_per_tick) >> 16;
}
static struct irqaction ns9xxx_timer_irq = {
.name = "NS9xxx Timer Tick",
.flags = IRQF_DISABLED | IRQF_TIMER,
.handler = ns9xxx_timer_interrupt,
};
static void __init ns9xxx_timer_init(void)
{
int tc;
usecs_per_tick =
SH_DIV(1000000 * TIMERCLOCKSELECT, ns9xxx_cpuclock(), 16);
/* disable timer */
if ((tc = SYS_TC(0)) & SYS_TCx_TEN)
SYS_TC(0) = tc & ~SYS_TCx_TEN;
SYS_TRC(0) = SH_DIV(ns9xxx_cpuclock(), (TIMERCLOCKSELECT * HZ), 0);
REGSET(tc, SYS_TCx, TEN, EN);
REGSET(tc, SYS_TCx, TLCS, DIV64); /* This must match TIMERCLOCKSELECT */
REGSET(tc, SYS_TCx, INTS, EN);
REGSET(tc, SYS_TCx, UDS, DOWN);
REGSET(tc, SYS_TCx, TDBG, STOP);
REGSET(tc, SYS_TCx, TSZ, 32);
REGSET(tc, SYS_TCx, REN, EN);
SYS_TC(0) = tc;
setup_irq(IRQ_TIMER0, &ns9xxx_timer_irq);
}
struct sys_timer ns9xxx_timer = {
.init = ns9xxx_timer_init,
.offset = ns9xxx_timer_gettimeoffset,
};
......@@ -171,8 +171,8 @@ config CPU_ARM925T
# ARM926T
config CPU_ARM926T
bool "Support ARM926T processor"
depends on ARCH_INTEGRATOR || ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || MACH_REALVIEW_EB || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || ARCH_AT91SAM9263
default y if ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || ARCH_AT91SAM9263
depends on ARCH_INTEGRATOR || ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || MACH_REALVIEW_EB || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_NS9XXX
default y if ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_NS9XXX
select CPU_32v5
select CPU_ABRT_EV5TJ
select CPU_CACHE_VIVT
......
/*
* include/asm-arm/arch-ns9xxx/board.h
*
* Copyright (C) 2006 by Digi International Inc.
* All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*/
#ifndef __ASM_ARCH_BOARD_H
#define __ASM_ARCH_BOARD_H
#include <asm/mach-types.h>
#define board_is_a9m9750dev() (machine_is_cc9p9360dev())
#endif /* ifndef __ASM_ARCH_BOARD_H */
/*
* include/asm-arm/arch-ns9xxx/clock.h
*
* Copyright (C) 2007 by Digi International Inc.
* All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*/
#ifndef __ASM_ARCH_CLOCK_H
#define __ASM_ARCH_CLOCK_H
static inline u32 ns9xxx_systemclock(void)
{
/*
* This should be a multiple of HZ * TIMERCLOCKSELECT (in time.c)
*/
return 353894400;
}
static inline const u32 ns9xxx_cpuclock(void)
{
return ns9xxx_systemclock() / 2;
}
static inline const u32 ns9xxx_ahbclock(void)
{
return ns9xxx_systemclock() / 4;
}
static inline const u32 ns9xxx_bbusclock(void)
{
return ns9xxx_systemclock() / 8;
}
#endif /* ifndef __ASM_ARCH_CLOCK_H */
/*
* include/asm-arm/arch-ns9xxx/debug-macro.S
* Copyright (C) 2006 by Digi International Inc.
* All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*/
#include <asm/hardware.h>
#include <asm/arch-ns9xxx/regs-board-a9m9750dev.h>
.macro addruart,rx
mrc p15, 0, \rx, c1, c0
tst \rx, #1
ldreq \rx, =NS9XXX_CSxSTAT_PHYS(0)
ldrne \rx, =io_p2v(NS9XXX_CSxSTAT_PHYS(0))
.endm
#define UART_SHIFT 2
#include <asm/hardware/debug-8250.S>
/*
* include/asm-arm/arch-ns9xxx/dma.h
*
* Copyright (C) 2006 by Digi International Inc.
* All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*/
#ifndef __ASM_ARCH_DMA_H
#define __ASM_ARCH_DMA_H
#endif /* ifndef __ASM_ARCH_DMA_H */
/*
* include/asm-arm/arch-ns9xxx/entry-macro.S
*
* Copyright (C) 2006 by Digi International Inc.
* All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*/
#include <asm/hardware.h>
#include <asm/arch-ns9xxx/regs-sys.h>
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
ldr \base, =SYS_ISRADDR
ldr \irqstat, [\base, #(SYS_ISA - SYS_ISRADDR)]
cmp \irqstat, #0
ldrne \irqnr, [\base]
.endm
.macro disable_fiq
.endm
/*
* include/asm-arm/arch-ns9xxx/hardware.h
*
* Copyright (C) 2006 by Digi International Inc.
* All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*/
#ifndef __ASM_ARCH_HARDWARE_H
#define __ASM_ARCH_HARDWARE_H
#include <asm/memory.h>
/*
* NetSilicon NS9xxx internal mapping:
*
* physical <--> virtual
* 0x90000000 - 0x906fffff <--> 0xf9000000 - 0xf96fffff
* 0xa0100000 - 0xa0afffff <--> 0xfa100000 - 0xfaafffff
*/
#define io_p2v(x) (0xf0000000 \
+ (((x) & 0xf0000000) >> 4) \
+ ((x) & 0x00ffffff))
#define io_v2p(x) ((((x) & 0x0f000000) << 4) \
+ ((x) & 0x00ffffff))
#define __REGBIT(bit) ((u32)1 << (bit))
#define __REGBITS(hbit, lbit) ((((u32)1 << ((hbit) - (lbit) + 1)) - 1) << (lbit))
#define __REGVAL(mask, value) (((value) * ((mask) & (-(mask))) & (mask)))
#ifndef __ASSEMBLY__
# define __REG(x) (*((volatile u32 *)io_p2v((x))))
# define __REG2(x, y) (*((volatile u32 *)io_p2v((x)) + (y)))
# define __REGB(x) (*((volatile u8 *)io_p2v((x))))
# define __REGB2(x) (*((volatile u8 *)io_p2v((x)) + (y)))
# define REGSET(var, reg, field, value) \
((var) = (((var) \
& ~(reg ## _ ## field & \
~ reg ## _ ## field ## _ ## value)) \
| (reg ## _ ## field ## _ ## value)))
# define REGSETIM(var, reg, field, value) \
((var) = (((var) \
& ~(reg ## _ ## field & \
~(__REGVAL(reg ## _ ## field, value)))) \
| (__REGVAL(reg ## _ ## field, value))))
# define REGGET(reg, field) \
((reg & (reg ## _ ## field)) / (field & (-field)))
#else
# define __REG(x) io_p2v(x)
# define __REG2(x, y) io_p2v((x) + (y))
# define __REGB(x) __REG((x))
# define __REGB2(x, y) __REG2((x), (y))
#endif
#endif /* ifndef __ASM_ARCH_HARDWARE_H */
/*
* include/asm-arm/arch-ns9xxx/io.h
*
* Copyright (C) 2006 by Digi International Inc.
* All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*/
#ifndef __ASM_ARCH_IO_H
#define __ASM_ARCH_IO_H
#define IO_SPACE_LIMIT 0xffffffff /* XXX */
#define __io(a) ((void __iomem *)(a))
#define __mem_pci(a) (a)
#define __mem_isa(a) (IO_BASE + (a))
#endif /* ifndef __ASM_ARCH_IO_H */
/*
* include/asm-arm/arch-ns9xxx/irqs.h
*
* Copyright (C) 2006 by Digi International Inc.
* All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*/
#ifndef __ASM_ARCH_IRQS_H
#define __ASM_ARCH_IRQS_H
#define IRQ_WATCHDOG 0
#define IRQ_AHBBUSERR 1
#define IRQ_BBUSAGG 2
/* irq 3 is reserved for NS9360 */
#define IRQ_ETHRX 4
#define IRQ_ETHTX 5
#define IRQ_ETHPHY 6
#define IRQ_LCD 7
#define IRQ_SERBRX 8
#define IRQ_SERBTX 9
#define IRQ_SERARX 10
#define IRQ_SERATX 11
#define IRQ_SERCRX 12
#define IRQ_SERCTX 13
#define IRQ_I2C 14
#define IRQ_BBUSDMA 15
#define IRQ_TIMER0 16
#define IRQ_TIMER1 17
#define IRQ_TIMER2 18
#define IRQ_TIMER3 19
#define IRQ_TIMER4 20
#define IRQ_TIMER5 21
#define IRQ_TIMER6 22
#define IRQ_TIMER7 23
#define IRQ_RTC 24
#define IRQ_USBHOST 25
#define IRQ_USBDEVICE 26
#define IRQ_IEEE1284 27
#define IRQ_EXT0 28
#define IRQ_EXT1 29
#define IRQ_EXT2 30
#define IRQ_EXT3 31
#define BBUS_IRQ(irq) (32 + irq)
#define IRQ_BBUS_DMA BBUS_IRQ(0)
#define IRQ_BBUS_SERBRX BBUS_IRQ(2)
#define IRQ_BBUS_SERBTX BBUS_IRQ(3)
#define IRQ_BBUS_SERARX BBUS_IRQ(4)
#define IRQ_BBUS_SERATX BBUS_IRQ(5)
#define IRQ_BBUS_SERCRX BBUS_IRQ(6)
#define IRQ_BBUS_SERCTX BBUS_IRQ(7)
#define IRQ_BBUS_SERDRX BBUS_IRQ(8)
#define IRQ_BBUS_SERDTX BBUS_IRQ(9)
#define IRQ_BBUS_I2C BBUS_IRQ(10)
#define IRQ_BBUS_1284 BBUS_IRQ(11)
#define IRQ_BBUS_UTIL BBUS_IRQ(12)
#define IRQ_BBUS_RTC BBUS_IRQ(13)
#define IRQ_BBUS_USBHST BBUS_IRQ(14)
#define IRQ_BBUS_USBDEV BBUS_IRQ(15)
#define IRQ_BBUS_AHBDMA1 BBUS_IRQ(24)
#define IRQ_BBUS_AHBDMA2 BBUS_IRQ(25)
/*
* these Interrupts are specific for the a9m9750dev board.
* They are generated by an FPGA that interrupts the CPU on
* IRQ_EXT2
*/
#define FPGA_IRQ(irq) (64 + irq)
#define IRQ_FPGA_UARTA FPGA_IRQ(0)
#define IRQ_FPGA_UARTB FPGA_IRQ(1)
#define IRQ_FPGA_UARTC FPGA_IRQ(2)
#define IRQ_FPGA_UARTD FPGA_IRQ(3)
#define IRQ_FPGA_TOUCH FPGA_IRQ(4)
#define IRQ_FPGA_CF FPGA_IRQ(5)
#define IRQ_FPGA_CAN0 FPGA_IRQ(6)
#define IRQ_FPGA_CAN1 FPGA_IRQ(7)
#define NR_IRQS 72
#endif /* __ASM_ARCH_IRQS_H */
/*
* include/asm-arm/arch-ns9xxx/memory.h
*
* Copyright (C) 2006 by Digi International Inc.
* All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*/
#ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H
/* x in [0..3] */
#define NS9XXX_CSxSTAT_PHYS(x) UL(((x) + 4) << 28)
#define NS9XXX_CS0STAT_LENGTH UL(0x1000)
#define NS9XXX_CS1STAT_LENGTH UL(0x1000)
#define NS9XXX_CS2STAT_LENGTH UL(0x1000)
#define NS9XXX_CS3STAT_LENGTH UL(0x1000)
#define PHYS_OFFSET UL(0x00000000)
#define __virt_to_bus(x) __virt_to_phys(x)
#define __bus_to_virt(x) __phys_to_virt(x)
#endif
/*
* include/asm-arm/arch-ns9xxx/processor.h
*
* Copyright (C) 2006 by Digi International Inc.
* All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*/
#ifndef __ASM_ARCH_PROCESSOR_H
#define __ASM_ARCH_PROCESSOR_H
#include <asm/mach-types.h>
#define processor_is_ns9360() (machine_is_cc9p9360dev())
#endif /* ifndef __ASM_ARCH_PROCESSOR_H */
/*
* include/asm-arm/arch-ns9xxx/regs-bbu.h
*
* Copyright (C) 2006 by Digi International Inc.
* All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*/
#ifndef __ASM_ARCH_REGSBBU_H
#define __ASM_ARCH_REGSBBU_H
#include <asm/hardware.h>
/* BBus Utility */
/* GPIO Configuration Register */
#define BBU_GC(x) __REG2(0x9060000c, (x))
#endif /* ifndef __ASM_ARCH_REGSBBU_H */
/*
* include/asm-arm/arch-ns9xxx/regs-board-a9m9750dev.h
*
* Copyright (C) 2006 by Digi International Inc.
* All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*/
#ifndef __ASM_ARCH_REGSBOARDA9M9750_H
#define __ASM_ARCH_REGSBOARDA9M9750_H
#include <asm/hardware.h>
#define FPGA_UARTA_BASE io_p2v(NS9XXX_CSxSTAT_PHYS(0))
#define FPGA_UARTB_BASE io_p2v(NS9XXX_CSxSTAT_PHYS(0) + 0x08)
#define FPGA_UARTC_BASE io_p2v(NS9XXX_CSxSTAT_PHYS(0) + 0x10)
#define FPGA_UARTD_BASE io_p2v(NS9XXX_CSxSTAT_PHYS(0) + 0x18)
#define FPGA_IER __REGB(NS9XXX_CSxSTAT_PHYS(0) + 0x50)
#define FPGA_ISR __REGB(NS9XXX_CSxSTAT_PHYS(0) + 0x60)
#endif /* ifndef __ASM_ARCH_REGSBOARDA9M9750_H */
/*
* include/asm-arm/arch-ns9xxx/regs-mem.h
*
* Copyright (C) 2006 by Digi International Inc.
* All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*/
#ifndef __ASM_ARCH_REGSMEM_H
#define __ASM_ARCH_REGSMEM_H
#include <asm/hardware.h>
/* Memory Module */
/* Control register */
#define MEM_CTRL __REG(0xa0700000)
/* Status register */
#define MEM_STAT __REG(0xa0700004)
/* Configuration register */
#define MEM_CONF __REG(0xa0700008)
/* Dynamic Memory Control register */
#define MEM_DMCTRL __REG(0xa0700020)
/* Dynamic Memory Refresh Timer */
#define MEM_DMRT __REG(0xa0700024)
/* Dynamic Memory Read Configuration register */
#define MEM_DMRC __REG(0xa0700028)
/* Dynamic Memory Precharge Command Period (tRP) */
#define MEM_DMPCP __REG(0xa0700030)
/* Dynamic Memory Active to Precharge Command Period (tRAS) */
#define MEM_DMAPCP __REG(0xa0700034)
/* Dynamic Memory Self-Refresh Exit Time (tSREX) */
#define MEM_DMSRET __REG(0xa0700038)
/* Dynamic Memory Last Data Out to Active Time (tAPR) */
#define MEM_DMLDOAT __REG(0xa070003c)
/* Dynamic Memory Data-in to Active Command Time (tDAL or TAPW) */
#define MEM_DMDIACT __REG(0xa0700040)
/* Dynamic Memory Write Recovery Time (tWR, tDPL, tRWL, tRDL) */
#define MEM_DMWRT __REG(0xa0700044)
/* Dynamic Memory Active to Active Command Period (tRC) */
#define MEM_DMAACP __REG(0xa0700048)
/* Dynamic Memory Auto Refresh Period, and Auto Refresh to Active Command Period (tRFC) */
#define MEM_DMARP __REG(0xa070004c)
/* Dynamic Memory Exit Self-Refresh to Active Command (tXSR) */
#define MEM_DMESRAC __REG(0xa0700050)
/* Dynamic Memory Active Bank A to Active B Time (tRRD) */
#define MEM_DMABAABT __REG(0xa0700054)
/* Dynamic Memory Load Mode register to Active Command Time (tMRD) */
#define MEM_DMLMACT __REG(0xa0700058)
/* Static Memory Extended Wait */
#define MEM_SMEW __REG(0xa0700080)
/* Dynamic Memory Configuration Register x */
#define MEM_DMCONF(x) __REG2(0xa0700100, (x) << 3)
/* Dynamic Memory RAS and CAS Delay x */
#define MEM_DMRCD(x) __REG2(0xa0700104, (x) << 3)
/* Static Memory Configuration Register x */
#define MEM_SMC(x) __REG2(0xa0700200, (x) << 3)
/* Static Memory Configuration Register x: Write protect */
#define MEM_SMC_WSMC __REGBIT(20)
#define MEM_SMC_WSMC_OFF __REGVAL(MEM_SMC_WSMC, 0)
#define MEM_SMC_WSMC_ON __REGVAL(MEM_SMC_WSMC, 1)
/* Static Memory Configuration Register x: Buffer enable */
#define MEM_SMC_BSMC __REGBIT(19)
#define MEM_SMC_BSMC_OFF __REGVAL(MEM_SMC_BSMC, 0)
#define MEM_SMC_BSMC_ON __REGVAL(MEM_SMC_BSMC, 1)
/* Static Memory Configuration Register x: Extended Wait */
#define MEM_SMC_EW __REGBIT(8)
#define MEM_SMC_EW_OFF __REGVAL(MEM_SMC_EW, 0)
#define MEM_SMC_EW_ON __REGVAL(MEM_SMC_EW, 1)
/* Static Memory Configuration Register x: Byte lane state */
#define MEM_SMC_PB __REGBIT(7)
#define MEM_SMC_PB_0 __REGVAL(MEM_SMC_PB, 0)
#define MEM_SMC_PB_1 __REGVAL(MEM_SMC_PB, 1)
/* Static Memory Configuration Register x: Chip select polarity */
#define MEM_SMC_PC __REGBIT(6)
#define MEM_SMC_PC_AL __REGVAL(MEM_SMC_PC, 0)
#define MEM_SMC_PC_AH __REGVAL(MEM_SMC_PC, 1)
/* static memory configuration register x: page mode*/
#define MEM_SMC_PM __REGBIT(3)
#define MEM_SMC_PM_DIS __REGVAL(MEM_SMC_PM, 0)
#define MEM_SMC_PM_ASYNC __REGVAL(MEM_SMC_PM, 1)
/* static memory configuration register x: Memory width */
#define MEM_SMC_MW __REGBITS(1, 0)
#define MEM_SMC_MW_8 __REGVAL(MEM_SMC_MW, 0)
#define MEM_SMC_MW_16 __REGVAL(MEM_SMC_MW, 1)
#define MEM_SMC_MW_32 __REGVAL(MEM_SMC_MW, 2)
/* Static Memory Write Enable Delay x */
#define MEM_SMWED(x) __REG2(0xa0700204, (x) << 3)
/* Static Memory Output Enable Delay x */
#define MEM_SMOED(x) __REG2(0xa0700208, (x) << 3)
/* Static Memory Read Delay x */
#define MEM_SMRD(x) __REG2(0xa070020c, (x) << 3)
/* Static Memory Page Mode Read Delay 0 */
#define MEM_SMPMRD(x) __REG2(0xa0700210, (x) << 3)
/* Static Memory Write Delay */
#define MEM_SMWD(x) __REG2(0xa0700214, (x) << 3)
/* Static Memory Turn Round Delay x */
#define MEM_SWT(x) __REG2(0xa0700218, (x) << 3)
#endif /* ifndef __ASM_ARCH_REGSMEM_H */
/*
* include/asm-arm/arch-ns9xxx/regs-sys.h
*
* Copyright (C) 2006 by Digi International Inc.
* All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*/
#ifndef __ASM_ARCH_REGSSYS_H
#define __ASM_ARCH_REGSSYS_H
#include <asm/hardware.h>
/* System Control Module */
/* AHB Arbiter Gen Configuration */
#define SYS_AHBAGENCONF __REG(0xa0900000)
/* BRC */
#define SYS_BRC(x) __REG2(0xa0900004, (x))
/* Timer x Reload Count register */
#define SYS_TRC(x) __REG2(0xa0900044, (x))
/* Timer x Read register */
#define SYS_TR(x) __REG2(0xa0900084, (x))
/* Interrupt Vector Address Register Level x */
#define SYS_IVA(x) __REG2(0xa09000c4, (x))
/* Interrupt Configuration registers */
#define SYS_IC(x) __REG2(0xa0900144, (x))
/* ISRADDR */
#define SYS_ISRADDR __REG(0xa0900164)
/* Interrupt Status Active */
#define SYS_ISA __REG(0xa0900168)
/* Interrupt Status Raw */
#define SYS_ISR __REG(0xa090016c)
/* Timer Interrupt Status register */
#define SYS_TIS __REG(0xa0900170)
/* PLL Configuration register */
#define SYS_PLL __REG(0xa0900188)
/* PLL Configuration register: PLL SW change */
#define SYS_PLL_SWC __REGBIT(15)
#define SYS_PLL_SWC_NO __REGVAL(SYS_PLL_SWC, 0)
#define SYS_PLL_SWC_YES __REGVAL(SYS_PLL_SWC, 1)
/* Timer x Control register */
#define SYS_TC(x) __REG2(0xa0900190, (x))
/* Timer x Control register: Timer enable */
#define SYS_TCx_TEN __REGBIT(15)
#define SYS_TCx_TEN_DIS __REGVAL(SYS_TCx_TEN, 1)
#define SYS_TCx_TEN_EN __REGVAL(SYS_TCx_TEN, 1)
/* Timer x Control register: CPU debug mode */
#define SYS_TCx_TDBG __REGBIT(10)
#define SYS_TCx_TDBG_CONT __REGVAL(SYS_TCx_TDBG, 0)
#define SYS_TCx_TDBG_STOP __REGVAL(SYS_TCx_TDBG, 1)
/* Timer x Control register: Interrupt clear */
#define SYS_TCx_INTC __REGBIT(9)
#define SYS_TCx_INTC_UNSET __REGVAL(SYS_TCx_INTC, 0)
#define SYS_TCx_INTC_SET __REGVAL(SYS_TCx_INTC, 1)
/* Timer x Control register: Timer clock select */
#define SYS_TCx_TLCS __REGBITS(8, 6)
#define SYS_TCx_TLCS_CPU __REGVAL(SYS_TCx_TLCS, 0) /* CPU clock */
#define SYS_TCx_TLCS_DIV2 __REGVAL(SYS_TCx_TLCS, 1) /* CPU clock / 2 */
#define SYS_TCx_TLCS_DIV4 __REGVAL(SYS_TCx_TLCS, 2) /* CPU clock / 4 */
#define SYS_TCx_TLCS_DIV8 __REGVAL(SYS_TCx_TLCS, 3) /* CPU clock / 8 */
#define SYS_TCx_TLCS_DIV16 __REGVAL(SYS_TCx_TLCS, 4) /* CPU clock / 16 */
#define SYS_TCx_TLCS_DIV32 __REGVAL(SYS_TCx_TLCS, 5) /* CPU clock / 32 */
#define SYS_TCx_TLCS_DIV64 __REGVAL(SYS_TCx_TLCS, 6) /* CPU clock / 64 */
#define SYS_TCx_TLCS_EXT __REGVAL(SYS_TCx_TLCS, 7)
/* Timer x Control register: Timer mode */
#define SYS_TCx_TM __REGBITS(5, 4)
#define SYS_TCx_TM_IEE __REGVAL(SYS_TCx_TM, 0) /* Internal timer or external event */
#define SYS_TCx_TM_ELL __REGVAL(SYS_TCx_TM, 1) /* External low-level, gated timer */
#define SYS_TCx_TM_EHL __REGVAL(SYS_TCx_TM, 2) /* External high-level, gated timer */
#define SYS_TCx_TM_CONCAT __REGVAL(SYS_TCx_TM, 3) /* Concatenate the lower timer. */
/* Timer x Control register: Interrupt select */
#define SYS_TCx_INTS __REGBIT(3)
#define SYS_TCx_INTS_DIS __REGVAL(SYS_TCx_INTS, 0)
#define SYS_TCx_INTS_EN __REGVAL(SYS_TCx_INTS, 1)
/* Timer x Control register: Up/down select */
#define SYS_TCx_UDS __REGBIT(2)
#define SYS_TCx_UDS_UP __REGVAL(SYS_TCx_UDS, 0)
#define SYS_TCx_UDS_DOWN __REGVAL(SYS_TCx_UDS, 1)
/* Timer x Control register: 32- or 16-bit timer */
#define SYS_TCx_TSZ __REGBIT(1)
#define SYS_TCx_TSZ_16 __REGVAL(SYS_TCx_TSZ, 0)
#define SYS_TCx_TSZ_32 __REGVAL(SYS_TCx_TSZ, 1)
/* Timer x Control register: Reload enable */
#define SYS_TCx_REN __REGBIT(0)
#define SYS_TCx_REN_DIS __REGVAL(SYS_TCx_REN, 0)
#define SYS_TCx_REN_EN __REGVAL(SYS_TCx_REN, 1)
/* System Memory Chip Select x Dynamic Memory Base */
#define SYS_SMCSDMB(x) __REG2(0xa09001d0, (x) << 1)
/* System Memory Chip Select x Dynamic Memory Mask */
#define SYS_SMCSDMM(x) __REG2(0xa09001d4, (x) << 1)
/* System Memory Chip Select x Static Memory Base */
#define SYS_SMCSSMB(x) __REG2(0xa09001f0, (x) << 1)
/* System Memory Chip Select x Static Memory Base: Chip select x base */
#define SYS_SMCSSMB_CSxB __REGBITS(31, 12)
/* System Memory Chip Select x Static Memory Mask */
#define SYS_SMCSSMM(x) __REG2(0xa09001f4, (x) << 1)
/* System Memory Chip Select x Static Memory Mask: Chip select x mask */
#define SYS_SMCSSMM_CSxM __REGBITS(31, 12)
/* System Memory Chip Select x Static Memory Mask: Chip select x enable */
#define SYS_SMCSSMM_CSEx __REGBIT(0)
#define SYS_SMCSSMM_CSEx_DIS __REGVAL(SYS_SMCSSMM_CSEx, 0)
#define SYS_SMCSSMM_CSEx_EN __REGVAL(SYS_SMCSSMM_CSEx, 1)
/* General purpose, user-defined ID register */
#define SYS_GENID __REG(0xa0900210)
/* External Interrupt x Control register */
#define SYS_EIC(x) __REG2(0xa0900214, (x))
/* External Interrupt x Control register: Status */
#define SYS_EIC_STS __REGBIT(3)
/* External Interrupt x Control register: Clear */
#define SYS_EIC_CLR __REGBIT(2)
/* External Interrupt x Control register: Polarity */
#define SYS_EIC_PLTY __REGBIT(1)
#define SYS_EIC_PLTY_AH __REGVAL(SYS_EIC_PLTY, 0)
#define SYS_EIC_PLTY_AL __REGVAL(SYS_EIC_PLTY, 1)
/* External Interrupt x Control register: Level edge */
#define SYS_EIC_LVEDG __REGBIT(0)
#define SYS_EIC_LVEDG_LEVEL __REGVAL(SYS_EIC_LVEDG, 0)
#define SYS_EIC_LVEDG_EDGE __REGVAL(SYS_EIC_LVEDG, 1)
#endif /* ifndef __ASM_ARCH_REGSSYS_H */
/*
* include/asm-arm/arch-ns9xxx/system.h
*
* Copyright (C) 2006 by Digi International Inc.
* All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*/
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H
#include <asm/proc-fns.h>
#include <asm/arch-ns9xxx/regs-sys.h>
#include <asm/mach-types.h>
static inline void arch_idle(void)
{
cpu_do_idle();
}
static inline void arch_reset(char mode)
{
u32 reg;
reg = SYS_PLL >> 16;
REGSET(reg, SYS_PLL, SWC, YES);
SYS_PLL = reg;
BUG();
}
#endif /* ifndef __ASM_ARCH_SYSTEM_H */
/*
* include/asm-arm/arch-ns9xxx/timex.h
*
* Copyright (C) 2005-2006 by Digi International Inc.
* All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*/
#ifndef __ASM_ARCH_TIMEX_H
#define __ASM_ARCH_TIMEX_H
/*
* value for CLOCK_TICK_RATE stolen from include/asm-arm/arch-s3c2410/timex.h.
* See there for an explanation.
*/
#define CLOCK_TICK_RATE 12000000
#endif /* ifndef __ASM_ARCH_TIMEX_H */
/*
* include/asm-arm/arch-ns9xxx/uncompress.h
*
* Copyright (C) 2006 by Digi International Inc.
* All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*/
#ifndef __ASM_ARCH_UNCOMPRESS_H
#define __ASM_ARCH_UNCOMPRESS_H
static void putc(char c)
{
volatile u8 *base = (volatile u8 *)0x40000000;
int t = 0x10000;
do {
if (base[5] & 0x20) {
base[0] = c;
break;
}
} while (--t);
}
#define arch_decomp_setup()
#define arch_decomp_wdog()
static void flush(void)
{
/* nothing */
}
#endif /* ifndef __ASM_ARCH_UNCOMPRESS_H */
/*
* include/asm-arm/arch-ns9xxx/vmalloc.h
*
* Copyright (C) 2006 by Digi International Inc.
* All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*/
#ifndef __ASM_ARCH_VMALLOC_H
#define __ASM_ARCH_VMALLOC_H
#define VMALLOC_END (0xf0000000)
#endif /* ifndef __ASM_ARCH_VMALLOC_H */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment