drm: add initial r300 3D support.

This adds initial r300 3D support to the radeon DRM.

From: Nicolai Haehnle, Vladimir Dergachev, and others.
Signed-off-by: David Airlie <airlied@linux.ie>

drivers/char/drm/Makefile

@@ -14,7 +14,7 @@ mga-objs    := mga_drv.o mga_dma.o mga_state.o mga_warp.o mga_irq.o
 i810-objs   := i810_drv.o i810_dma.o
 i830-objs   := i830_drv.o i830_dma.o i830_irq.o
 i915-objs   := i915_drv.o i915_dma.o i915_irq.o i915_mem.o
-radeon-objs := radeon_drv.o radeon_cp.o radeon_state.o radeon_mem.o radeon_irq.o
+radeon-objs := radeon_drv.o radeon_cp.o radeon_state.o radeon_mem.o radeon_irq.o r300_cmdbuf.o
 ffb-objs    := ffb_drv.o ffb_context.o
 sis-objs    := sis_drv.o sis_ds.o sis_mm.o
 savage-objs := savage_drv.o savage_bci.o savage_state.o

drivers/char/drm/drm_pciids.h

@@ -25,6 +25,8 @@
 	{0x1002, 0x4965, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R250}, \
 	{0x1002, 0x4966, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R250}, \
 	{0x1002, 0x4967, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R250}, \
+	{0x1002, 0x4A49, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420}, \
+	{0x1002, 0x4A4B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420}, \
 	{0x1002, 0x4C57, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV200|CHIP_IS_MOBILITY}, \
 	{0x1002, 0x4C58, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV200|CHIP_IS_MOBILITY}, \
 	{0x1002, 0x4C59, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV100|CHIP_IS_MOBILITY}, \
@@ -33,7 +35,17 @@
 	{0x1002, 0x4C65, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R250|CHIP_IS_MOBILITY}, \
 	{0x1002, 0x4C66, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R250|CHIP_IS_MOBILITY}, \
 	{0x1002, 0x4C67, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R250|CHIP_IS_MOBILITY}, \
+	{0x1002, 0x4E44, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R300}, \
+	{0x1002, 0x4E45, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R300}, \
+	{0x1002, 0x4E46, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV350}, \
+	{0x1002, 0x4E47, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R300}, \
+	{0x1002, 0x4E48, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R350}, \
+	{0x1002, 0x4E49, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R350}, \
+	{0x1002, 0x4E4A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV350}, \
+	{0x1002, 0x4E4B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R350}, \
 	{0x1002, 0x4E50, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV350|CHIP_IS_MOBILITY}, \
+	{0x1002, 0x4E51, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV350|CHIP_IS_MOBILITY}, \
+	{0x1002, 0x4E54, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV350|CHIP_IS_MOBILITY}, \
 	{0x1002, 0x5144, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R100|CHIP_SINGLE_CRTC}, \
 	{0x1002, 0x5145, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R100|CHIP_SINGLE_CRTC}, \
 	{0x1002, 0x5146, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R100|CHIP_SINGLE_CRTC}, \
@@ -56,6 +68,7 @@
 	{0x1002, 0x516A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R200}, \
 	{0x1002, 0x516B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R200}, \
 	{0x1002, 0x516C, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R200}, \
+	{0x1002, 0x5460, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV350}, \
 	{0x1002, 0x5834, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS300|CHIP_IS_IGP}, \
 	{0x1002, 0x5835, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS300|CHIP_IS_IGP|CHIP_IS_MOBILITY}, \
 	{0x1002, 0x5836, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS300|CHIP_IS_IGP}, \

drivers/char/drm/radeon_cp.c

@@ -32,6 +32,7 @@
 #include "drm.h"
 #include "radeon_drm.h"
 #include "radeon_drv.h"
+#include "r300_reg.h"
 
 #define RADEON_FIFO_DEBUG	0
 
@@ -1151,6 +1152,8 @@ static void radeon_cp_init_ring_buffer( drm_device_t *dev,
 
 #if __OS_HAS_AGP
 	if ( !dev_priv->is_pci ) {
+		/* set RADEON_AGP_BASE here instead of relying on X from user space */
+		RADEON_WRITE(RADEON_AGP_BASE, (unsigned int)dev->agp->base);
 		RADEON_WRITE( RADEON_CP_RB_RPTR_ADDR,
 			      dev_priv->ring_rptr->offset
 			      - dev->agp->base
@@ -1626,6 +1629,9 @@ int radeon_cp_init( DRM_IOCTL_ARGS )
 
 	DRM_COPY_FROM_USER_IOCTL( init, (drm_radeon_init_t __user *)data, sizeof(init) );
 
+	if(init.func == RADEON_INIT_R300_CP)
+		r300_init_reg_flags();
+
 	switch ( init.func ) {
 	case RADEON_INIT_CP:
 	case RADEON_INIT_R200_CP:
@@ -2040,12 +2046,19 @@ int radeon_driver_preinit(struct drm_device *dev, unsigned long flags)
 	case CHIP_RV200:
 	case CHIP_R200:
 	case CHIP_R300:
+	case CHIP_R420:
 		dev_priv->flags |= CHIP_HAS_HIERZ;
 		break;
 	default:
 	/* all other chips have no hierarchical z buffer */
 		break;
 	}
+
+	if (drm_device_is_agp(dev))
+		dev_priv->flags |= CHIP_IS_AGP;
+	
+	DRM_DEBUG("%s card detected\n",
+		  ((dev_priv->flags & CHIP_IS_AGP) ? "AGP" : "PCI"));
 	return ret;
 }
 

drivers/char/drm/radeon_drm.h

@@ -195,6 +195,52 @@ typedef union {
 #define RADEON_WAIT_2D  0x1
 #define RADEON_WAIT_3D  0x2
 
+/* Allowed parameters for R300_CMD_PACKET3
+ */
+#define R300_CMD_PACKET3_CLEAR		0
+#define R300_CMD_PACKET3_RAW		1
+
+/* Commands understood by cmd_buffer ioctl for R300.
+ * The interface has not been stabilized, so some of these may be removed
+ * and eventually reordered before stabilization.
+ */
+#define R300_CMD_PACKET0		1 
+#define R300_CMD_VPU			2 /* emit vertex program upload */
+#define R300_CMD_PACKET3		3 /* emit a packet3 */
+#define R300_CMD_END3D			4 /* emit sequence ending 3d rendering */
+#define R300_CMD_CP_DELAY		5
+#define R300_CMD_DMA_DISCARD		6
+#define R300_CMD_WAIT			7
+#	define R300_WAIT_2D  		0x1
+#	define R300_WAIT_3D  		0x2
+#	define R300_WAIT_2D_CLEAN  	0x3
+#	define R300_WAIT_3D_CLEAN  	0x4
+
+typedef union {
+	unsigned int u;
+	struct {
+		unsigned char cmd_type, pad0, pad1, pad2;
+	} header;
+	struct {
+		unsigned char cmd_type, count, reglo, reghi;
+	} packet0;
+	struct {
+		unsigned char cmd_type, count, adrlo, adrhi;
+	} vpu;
+	struct {
+		unsigned char cmd_type, packet, pad0, pad1;
+	} packet3;
+	struct {
+		unsigned char cmd_type, packet;
+		unsigned short count; /* amount of packet2 to emit */
+	} delay;
+	struct {
+		unsigned char cmd_type, buf_idx, pad0, pad1;
+	} dma;
+	struct {
+		unsigned char cmd_type, flags, pad0, pad1;	
+	} wait;
+} drm_r300_cmd_header_t;
 
 #define RADEON_FRONT			0x1
 #define RADEON_BACK			0x2

drivers/char/drm/radeon_drv.h

@@ -82,9 +82,10 @@
  *     - Add support for r100 cube maps
  * 1.16- Add R200_EMIT_PP_TRI_PERF_CNTL packet to support brilinear
  *       texture filtering on r200
+ * 1.17- Add initial support for R300 (3D).
  */
 #define DRIVER_MAJOR		1
-#define DRIVER_MINOR		16
+#define DRIVER_MINOR		17
 #define DRIVER_PATCHLEVEL	0
 
 #define GET_RING_HEAD(dev_priv)		DRM_READ32(  (dev_priv)->ring_rptr, 0 )
@@ -106,7 +107,9 @@ enum radeon_family {
 	CHIP_RV280,
 	CHIP_R300,
 	CHIP_RS300,
+	CHIP_R350,
 	CHIP_RV350,
+	CHIP_R420,
 	CHIP_LAST,
 };
 
@@ -321,6 +324,14 @@ extern int radeon_postcleanup( struct drm_device *dev );
 extern long radeon_compat_ioctl(struct file *filp, unsigned int cmd,
 				unsigned long arg);
 
+
+/* r300_cmdbuf.c */
+extern void r300_init_reg_flags(void);
+
+extern int r300_do_cp_cmdbuf(drm_device_t* dev, DRMFILE filp,
+			     drm_file_t* filp_priv,
+			     drm_radeon_cmd_buffer_t* cmdbuf);
+
 /* Flags for stats.boxes
  */
 #define RADEON_BOX_DMA_IDLE      0x1
@@ -358,6 +369,11 @@ extern long radeon_compat_ioctl(struct file *filp, unsigned int cmd,
 #define RADEON_CRTC2_OFFSET		0x0324
 #define RADEON_CRTC2_OFFSET_CNTL	0x0328
 
+#define RADEON_MPP_TB_CONFIG		0x01c0
+#define RADEON_MEM_CNTL			0x0140
+#define RADEON_MEM_SDRAM_MODE_REG	0x0158
+#define RADEON_AGP_BASE			0x0170
+
 #define RADEON_RB3D_COLOROFFSET		0x1c40
 #define RADEON_RB3D_COLORPITCH		0x1c48
 
@@ -652,16 +668,27 @@ extern long radeon_compat_ioctl(struct file *filp, unsigned int cmd,
 #define RADEON_CP_PACKET1		0x40000000
 #define RADEON_CP_PACKET2		0x80000000
 #define RADEON_CP_PACKET3		0xC0000000
+#       define RADEON_CP_NOP                    0x00001000
+#       define RADEON_CP_NEXT_CHAR              0x00001900
+#       define RADEON_CP_PLY_NEXTSCAN           0x00001D00
+#       define RADEON_CP_SET_SCISSORS           0x00001E00
+             /* GEN_INDX_PRIM is unsupported starting with R300 */
 #	define RADEON_3D_RNDR_GEN_INDX_PRIM	0x00002300
 #	define RADEON_WAIT_FOR_IDLE		0x00002600
 #	define RADEON_3D_DRAW_VBUF		0x00002800
 #	define RADEON_3D_DRAW_IMMD		0x00002900
 #	define RADEON_3D_DRAW_INDX		0x00002A00
+#       define RADEON_CP_LOAD_PALETTE           0x00002C00
 #	define RADEON_3D_LOAD_VBPNTR		0x00002F00
 #	define RADEON_MPEG_IDCT_MACROBLOCK	0x00003000
 #	define RADEON_MPEG_IDCT_MACROBLOCK_REV	0x00003100
 #	define RADEON_3D_CLEAR_ZMASK		0x00003200
+#	define RADEON_CP_INDX_BUFFER		0x00003300
+#       define RADEON_CP_3D_DRAW_VBUF_2         0x00003400
+#       define RADEON_CP_3D_DRAW_IMMD_2         0x00003500
+#       define RADEON_CP_3D_DRAW_INDX_2         0x00003600
 #	define RADEON_3D_CLEAR_HIZ		0x00003700
+#       define RADEON_CP_3D_CLEAR_CMASK         0x00003802
 #	define RADEON_CNTL_HOSTDATA_BLT		0x00009400
 #	define RADEON_CNTL_PAINT_MULTI		0x00009A00
 #	define RADEON_CNTL_BITBLT_MULTI		0x00009B00

drivers/char/drm/radeon_state.c

@@ -2797,6 +2797,17 @@ static int radeon_cp_cmdbuf( DRM_IOCTL_ARGS )
 
 	orig_nbox = cmdbuf.nbox;
 
+	if(dev_priv->microcode_version == UCODE_R300) {
+		int temp;
+		temp=r300_do_cp_cmdbuf(dev, filp, filp_priv, &cmdbuf);
+	
+		if (orig_bufsz != 0)
+			drm_free(kbuf, orig_bufsz, DRM_MEM_DRIVER);
+	
+		return temp;
+	}
+
+	/* microcode_version != r300 */
 	while ( cmdbuf.bufsz >= sizeof(header) ) {
 
 		header.i = *(int *)cmdbuf.buf;