Commit 2d9e2763 authored by David S. Miller's avatar David S. Miller

[SPARC64]: Fix two bugs wrt. kernel 4MB TSB.

1) The TSB lookup was not using the correct hash mask.

2) It was not aligned on a boundary equal to it's size,
   which is required by the sun4v Hypervisor.

wasn't having it's return value checked, and that bug will be fixed up
as well in a subsequent changeset.
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 5f81941c
...@@ -653,33 +653,54 @@ setup_tba: ...@@ -653,33 +653,54 @@ setup_tba:
restore restore
sparc64_boot_end: sparc64_boot_end:
#include "ktlb.S"
#include "tsb.S"
#include "etrap.S" #include "etrap.S"
#include "rtrap.S" #include "rtrap.S"
#include "winfixup.S" #include "winfixup.S"
#include "entry.S" #include "entry.S"
#include "sun4v_tlb_miss.S" #include "sun4v_tlb_miss.S"
#include "sun4v_ivec.S" #include "sun4v_ivec.S"
#include "ktlb.S"
#include "tsb.S"
/* /*
* The following skip makes sure the trap table in ttable.S is aligned * The following skip makes sure the trap table in ttable.S is aligned
* on a 32K boundary as required by the v9 specs for TBA register. * on a 32K boundary as required by the v9 specs for TBA register.
* *
* We align to a 32K boundary, then we have the 32K kernel TSB, * We align to a 32K boundary, then we have the 32K kernel TSB,
* then the 32K aligned trap table. * the 64K kernel 4MB TSB, and then the 32K aligned trap table.
*/ */
1: 1:
.skip 0x4000 + _start - 1b .skip 0x4000 + _start - 1b
! 0x0000000000408000
.globl swapper_tsb .globl swapper_tsb
swapper_tsb: swapper_tsb:
.skip (32 * 1024) .skip (32 * 1024)
! 0x0000000000408000 .globl swapper_4m_tsb
swapper_4m_tsb:
.skip (64 * 1024)
! 0x0000000000420000
/* Some care needs to be exercised if you try to move the
* location of the trap table relative to other things. For
* one thing there are br* instructions in some of the
* trap table entires which branch back to code in ktlb.S
* Those instructions can only handle a signed 16-bit
* displacement.
*
* There is a binutils bug (bugzilla #4558) which causes
* the relocation overflow checks for such instructions to
* not be done correctly. So bintuils will not notice the
* error and will instead write junk into the relocation and
* you'll have an unbootable kernel.
*/
#include "ttable.S" #include "ttable.S"
! 0x0000000000428000
#include "systbls.S" #include "systbls.S"
.data .data
......
...@@ -61,8 +61,11 @@ unsigned long kern_linear_pte_xor[2] __read_mostly; ...@@ -61,8 +61,11 @@ unsigned long kern_linear_pte_xor[2] __read_mostly;
unsigned long kpte_linear_bitmap[KPTE_BITMAP_BYTES / sizeof(unsigned long)]; unsigned long kpte_linear_bitmap[KPTE_BITMAP_BYTES / sizeof(unsigned long)];
#ifndef CONFIG_DEBUG_PAGEALLOC #ifndef CONFIG_DEBUG_PAGEALLOC
/* A special kernel TSB for 4MB and 256MB linear mappings. */ /* A special kernel TSB for 4MB and 256MB linear mappings.
struct tsb swapper_4m_tsb[KERNEL_TSB4M_NENTRIES]; * Space is allocated for this right after the trap table
* in arch/sparc64/kernel/head.S
*/
extern struct tsb swapper_4m_tsb[KERNEL_TSB4M_NENTRIES];
#endif #endif
#define MAX_BANKS 32 #define MAX_BANKS 32
......
...@@ -271,7 +271,7 @@ extern struct tsb_phys_patch_entry __tsb_phys_patch, __tsb_phys_patch_end; ...@@ -271,7 +271,7 @@ extern struct tsb_phys_patch_entry __tsb_phys_patch, __tsb_phys_patch_end;
#define KERN_TSB4M_LOOKUP_TL1(TAG, REG1, REG2, REG3, REG4, OK_LABEL) \ #define KERN_TSB4M_LOOKUP_TL1(TAG, REG1, REG2, REG3, REG4, OK_LABEL) \
sethi %hi(swapper_4m_tsb), REG1; \ sethi %hi(swapper_4m_tsb), REG1; \
or REG1, %lo(swapper_4m_tsb), REG1; \ or REG1, %lo(swapper_4m_tsb), REG1; \
and TAG, (KERNEL_TSB_NENTRIES - 1), REG2; \ and TAG, (KERNEL_TSB4M_NENTRIES - 1), REG2; \
sllx REG2, 4, REG2; \ sllx REG2, 4, REG2; \
add REG1, REG2, REG2; \ add REG1, REG2, REG2; \
KTSB_LOAD_QUAD(REG2, REG3); \ KTSB_LOAD_QUAD(REG2, REG3); \
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment