drivers/block/sx8: several minor changes

* Newer hardware doesn't corrupt data when the queue depth
  is greater than one.  Rather than force the user to recompile
  with a greater queue depth, make it a module parameter.
* update copyright date
* add MODULE_VERSION()
* trim trailing whitespace
* move CARM_SG_BOUNDARY to a separate enum, since its unsigned long
* bump to version 1.0

drivers/block/sx8.c

 /*
  *  sx8.c: Driver for Promise SATA SX8 looks-like-I2O hardware
  *
- *  Copyright 2004 Red Hat, Inc.
+ *  Copyright 2004-2005 Red Hat, Inc.
  *
  *  Author/maintainer:  Jeff Garzik <jgarzik@pobox.com>
  *
@@ -31,10 +31,6 @@
 #include <asm/semaphore.h>
 #include <asm/uaccess.h>
 
-MODULE_AUTHOR("Jeff Garzik");
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("Promise SATA SX8 block driver");
-
 #if 0
 #define CARM_DEBUG
 #define CARM_VERBOSE_DEBUG
@@ -45,9 +41,35 @@ MODULE_DESCRIPTION("Promise SATA SX8 block driver");
 #undef CARM_NDEBUG
 
 #define DRV_NAME "sx8"
-#define DRV_VERSION "0.8"
+#define DRV_VERSION "1.0"
 #define PFX DRV_NAME ": "
 
+MODULE_AUTHOR("Jeff Garzik");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Promise SATA SX8 block driver");
+MODULE_VERSION(DRV_VERSION);
+
+/*
+ * SX8 hardware has a single message queue for all ATA ports.
+ * When this driver was written, the hardware (firmware?) would
+ * corrupt data eventually, if more than one request was outstanding.
+ * As one can imagine, having 8 ports bottlenecking on a single
+ * command hurts performance.
+ *
+ * Based on user reports, later versions of the hardware (firmware?)
+ * seem to be able to survive with more than one command queued.
+ *
+ * Therefore, we default to the safe option -- 1 command -- but
+ * allow the user to increase this.
+ *
+ * SX8 should be able to support up to ~60 queued commands (CARM_MAX_REQ),
+ * but problems seem to occur when you exceed ~30, even on newer hardware.
+ */
+static int max_queue = 1;
+module_param(max_queue, int, 0444);
+MODULE_PARM_DESC(max_queue, "Maximum number of queued commands. (min==1, max==30, safe==1)");
+
+
 #define NEXT_RESP(idx)	((idx + 1) % RMSG_Q_LEN)
 
 /* 0xf is just arbitrary, non-zero noise; this is sorta like poisoning */
@@ -90,12 +112,10 @@ enum {
 
 	/* command message queue limits */
 	CARM_MAX_REQ		= 64,	       /* max command msgs per host */
-	CARM_MAX_Q		= 1,		   /* one command at a time */
 	CARM_MSG_LOW_WATER	= (CARM_MAX_REQ / 4),	     /* refill mark */
 
 	/* S/G limits, host-wide and per-request */
 	CARM_MAX_REQ_SG		= 32,	     /* max s/g entries per request */
-	CARM_SG_BOUNDARY	= 0xffffUL,	    /* s/g segment boundary */
 	CARM_MAX_HOST_SG	= 600,		/* max s/g entries per host */
 	CARM_SG_LOW_WATER	= (CARM_MAX_HOST_SG / 4),   /* re-fill mark */
 
@@ -181,6 +201,10 @@ enum {
 	FL_DYN_MAJOR		= (1 << 17),
 };
 
+enum {
+	CARM_SG_BOUNDARY	= 0xffffUL,	    /* s/g segment boundary */
+};
+
 enum scatter_gather_types {
 	SGT_32BIT		= 0,
 	SGT_64BIT		= 1,
@@ -509,7 +533,7 @@ static struct carm_request *carm_get_request(struct carm_host *host)
 	if (host->hw_sg_used >= (CARM_MAX_HOST_SG - CARM_MAX_REQ_SG))
 		return NULL;
 
-	for (i = 0; i < CARM_MAX_Q; i++)
+	for (i = 0; i < max_queue; i++)
 		if ((host->msg_alloc & (1ULL << i)) == 0) {
 			struct carm_request *crq = &host->req[i];
 			crq->port = NULL;
@@ -528,7 +552,7 @@ static struct carm_request *carm_get_request(struct carm_host *host)
 
 static int carm_put_request(struct carm_host *host, struct carm_request *crq)
 {
-	assert(crq->tag < CARM_MAX_Q);
+	assert(crq->tag < max_queue);
 
 	if (unlikely((host->msg_alloc & (1ULL << crq->tag)) == 0))
 		return -EINVAL; /* tried to clear a tag that was not active */
@@ -791,7 +815,7 @@ static inline void carm_end_rq(struct carm_host *host, struct carm_request *crq,
 			int is_ok)
 {
 	carm_end_request_queued(host, crq, is_ok);
-	if (CARM_MAX_Q == 1)
+	if (max_queue == 1)
 		carm_round_robin(host);
 	else if ((host->n_msgs <= CARM_MSG_LOW_WATER) &&
 		 (host->hw_sg_used <= CARM_SG_LOW_WATER)) {