[PATCH] shpchp: remove redundant data structures

State information is currently stored in per-slot as well as
per-pci-function data structures in shpchp. There's a lot of
overlap in the information kept, and some of it is never used.
This patch consolidates the state information to per-slot and
eliminates unused data structures. The biggest change is to
eliminate the pci_func structure and the code around managing
its lists.
Signed-off-by: Rajesh Shah <rajesh.shah@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/pci/hotplug/shpchp.h

@@ -52,34 +52,18 @@ extern int shpchp_debug;
 #define info(format, arg...) printk(KERN_INFO "%s: " format, MY_NAME , ## arg)
 #define warn(format, arg...) printk(KERN_WARNING "%s: " format, MY_NAME , ## arg)
 
-struct pci_func {
-	struct pci_func *next;
-	u8 bus;
-	u8 device;
-	u8 function;
-	u8 is_a_board;
-	u16 status;
-	u8 configured;
-	u8 switch_save;
-	u8 presence_save;
-	u8 pwr_save;
-	struct pci_dev* pci_dev;
-};
-
 #define SLOT_MAGIC	0x67267321
 struct slot {
 	u32 magic;
 	struct slot *next;
 	u8 bus;
 	u8 device;
+	u16 status;
 	u32 number;
 	u8 is_a_board;
-	u8 configured;
 	u8 state;
-	u8 switch_save;
 	u8 presence_save;
-	u32 capabilities;
-	u16 reserved2;
+	u8 pwr_save;
 	struct timer_list task_event;
 	u8 hp_slot;
 	struct controller *ctrl;
@@ -106,19 +90,14 @@ struct controller {
 	struct hpc_ops *hpc_ops;
 	wait_queue_head_t queue;	/* sleep & wake process */
 	u8 next_event;
-	u8 seg;
 	u8 bus;
 	u8 device;
 	u8 function;
-	u8 rev;
 	u8 slot_device_offset;
 	u8 add_support;
 	enum pci_bus_speed speed;
 	u32 first_slot;		/* First physical slot number */
 	u8 slot_bus;		/* Bus where the slots handled by this controller sit */
-	u8 push_flag;
-	u16 ctlrcap;
-	u16 vendor_id;
 };
 
 struct hotplug_params {
@@ -169,13 +148,9 @@ struct hotplug_params {
  * error Messages
  */
 #define msg_initialization_err	"Initialization failure, error=%d\n"
-#define msg_HPC_rev_error	"Unsupported revision of the PCI hot plug controller found.\n"
-#define msg_HPC_non_shpc	"The PCI hot plug controller is not supported by this driver.\n"
-#define msg_HPC_not_supported	"This system is not supported by this version of shpcphd mdoule. Upgrade to a newer version of shpchpd\n"
 #define msg_button_on		"PCI slot #%d - powering on due to button press.\n"
 #define msg_button_off		"PCI slot #%d - powering off due to button press.\n"
 #define msg_button_cancel	"PCI slot #%d - action canceled due to button press.\n"
-#define msg_button_ignore	"PCI slot #%d - button press ignored.  (action in progress...)\n"
 
 /* sysfs functions for the hotplug controller info */
 extern void shpchp_create_ctrl_files	(struct controller *ctrl);
@@ -183,8 +158,6 @@ extern void shpchp_create_ctrl_files	(struct controller *ctrl);
 /* controller functions */
 extern int	shpchp_event_start_thread(void);
 extern void	shpchp_event_stop_thread(void);
-extern struct 	pci_func *shpchp_slot_create(unsigned char busnumber);
-extern struct 	pci_func *shpchp_slot_find(unsigned char bus, unsigned char device, unsigned char index);
 extern int	shpchp_enable_slot(struct slot *slot);
 extern int	shpchp_disable_slot(struct slot *slot);
 
@@ -195,9 +168,8 @@ extern u8	shpchp_handle_power_fault(u8 hp_slot, void *inst_id);
 
 /* pci functions */
 extern int	shpchp_save_config(struct controller *ctrl, int busnumber, int num_ctlr_slots, int first_device_num);
-extern int	shpchp_save_slot_config(struct controller *ctrl, struct pci_func * new_slot);
 extern int	shpchp_configure_device(struct slot *p_slot);
-extern int	shpchp_unconfigure_device(struct pci_func* func);
+extern int	shpchp_unconfigure_device(struct slot *p_slot);
 extern void	get_hp_hw_control_from_firmware(struct pci_dev *dev);
 extern void	get_hp_params_from_firmware(struct pci_dev *dev,
 		struct hotplug_params *hpp);
@@ -207,7 +179,6 @@ extern int	shpchprm_get_physical_slot_number(struct controller *ctrl,
 
 /* Global variables */
 extern struct controller *shpchp_ctrl_list;
-extern struct pci_func *shpchp_slot_list[256];
 
 struct ctrl_reg {
 	volatile u32 base_offset;

drivers/pci/hotplug/shpchp_core.c

@@ -45,7 +45,6 @@ int shpchp_debug;
 int shpchp_poll_mode;
 int shpchp_poll_time;
 struct controller *shpchp_ctrl_list;	/* = NULL */
-struct pci_func *shpchp_slot_list[256];
 
 #define DRIVER_VERSION	"0.4"
 #define DRIVER_AUTHOR	"Dan Zink <dan.zink@compaq.com>, Greg Kroah-Hartman <greg@kroah.com>, Dely Sy <dely.l.sy@intel.com>"
@@ -475,7 +474,6 @@ err_out_none:
 
 static int shpc_start_thread(void)
 {
-	int loop;
 	int retval = 0;
 	
 	dbg("Initialize + Start the notification/polling mechanism \n");
@@ -486,20 +484,11 @@ static int shpc_start_thread(void)
 		return retval;
 	}
 
-	dbg("Initialize slot lists\n");
-	/* One slot list for each bus in the system */
-	for (loop = 0; loop < 256; loop++) {
-		shpchp_slot_list[loop] = NULL;
-	}
-
 	return retval;
 }
 
 static void __exit unload_shpchpd(void)
 {
-	struct pci_func *next;
-	struct pci_func *TempSlot;
-	int loop;
 	struct controller *ctrl;
 	struct controller *tctrl;
 
@@ -519,15 +508,6 @@ static void __exit unload_shpchpd(void)
 		kfree(tctrl);
 	}
 
-	for (loop = 0; loop < 256; loop++) {
-		next = shpchp_slot_list[loop];
-		while (next != NULL) {
-			TempSlot = next;
-			next = next->next;
-			kfree(TempSlot);
-		}
-	}
-
 	/* Stop the notification mechanism */
 	shpchp_event_stop_thread();
 

drivers/pci/hotplug/shpchp_pci.c

@@ -148,20 +148,33 @@ int shpchp_configure_device(struct slot *p_slot)
 	return 0;
 }
 
-int shpchp_unconfigure_device(struct pci_func* func) 
+int shpchp_unconfigure_device(struct slot *p_slot)
 {
 	int rc = 0;
 	int j;
+	u8 bctl = 0;
 	
-	dbg("%s: bus/dev/func = %x/%x/%x\n", __FUNCTION__, func->bus,
-				func->device, func->function);
+	dbg("%s: bus/dev = %x/%x\n", __FUNCTION__, p_slot->bus, p_slot->device);
 
 	for (j=0; j<8 ; j++) {
-		struct pci_dev* temp = pci_find_slot(func->bus,
-				(func->device << 3) | j);
-		if (temp) {
-			pci_remove_bus_device(temp);
+		struct pci_dev* temp = pci_find_slot(p_slot->bus,
+				(p_slot->device << 3) | j);
+		if (!temp)
+			continue;
+		if ((temp->class >> 16) == PCI_BASE_CLASS_DISPLAY) {
+			err("Cannot remove display device %s\n",
+					pci_name(temp));
+			continue;
 		}
+		if (temp->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
+			pci_read_config_byte(temp, PCI_BRIDGE_CONTROL, &bctl);
+			if (bctl & PCI_BRIDGE_CTL_VGA) {
+				err("Cannot remove display device %s\n",
+						pci_name(temp));
+				continue;
+			}
+		}
+		pci_remove_bus_device(temp);
 	}
 	return rc;
 }