Merge branch 'libertas' of...

Merge branch 'libertas' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream-fixes

drivers/net/wireless/Kconfig

@@ -266,16 +266,23 @@ config IPW2200_DEBUG
 
 	  If you are not sure, say N here.
 
-config LIBERTAS_USB
-	tristate "Marvell Libertas 8388 802.11a/b/g cards"
-	depends on USB && WLAN_80211
+config LIBERTAS
+	tristate "Marvell 8xxx Libertas WLAN driver support"
+	depends on WLAN_80211
+	select IEEE80211
 	select FW_LOADER
+	---help---
+	  A library for Marvell Libertas 8xxx devices.
+
+config LIBERTAS_USB
+	tristate "Marvell Libertas 8388 USB 802.11b/g cards"
+	depends on LIBERTAS && USB
 	---help---
 	  A driver for Marvell Libertas 8388 USB devices.
 
-config LIBERTAS_USB_DEBUG
-	bool "Enable full debugging output in the Libertas USB module."
-	depends on LIBERTAS_USB
+config LIBERTAS_DEBUG
+	bool "Enable full debugging output in the Libertas module."
+	depends on LIBERTAS
 	---help---
 	  Debugging support.
 

drivers/net/wireless/libertas/11d.h

@@ -47,7 +47,7 @@ struct mrvlietypes_domainparamset {
 } __attribute__ ((packed));
 
 struct cmd_ds_802_11d_domain_info {
-	u16 action;
+	__le16 action;
 	struct mrvlietypes_domainparamset domain;
 } __attribute__ ((packed));
 
@@ -98,7 +98,9 @@ int libertas_cmd_enable_11d(wlan_private * priv, struct iwreq *wrq);
 int libertas_ret_802_11d_domain_info(wlan_private * priv,
 				 struct cmd_ds_command *resp);
 
-int libertas_parse_dnld_countryinfo_11d(wlan_private * priv);
+struct bss_descriptor;
+int libertas_parse_dnld_countryinfo_11d(wlan_private * priv,
+                                        struct bss_descriptor * bss);
 
 int libertas_create_dnld_countryinfo_11d(wlan_private * priv);
 

drivers/net/wireless/libertas/Makefile

-usb8xxx-objs := main.o fw.o wext.o \
+libertas-objs := main.o fw.o wext.o \
 		rx.o tx.o cmd.o 	  \
 		cmdresp.o scan.o	  \
 		join.o 11d.o 		  \
@@ -8,5 +8,5 @@ usb8xxx-objs := main.o fw.o wext.o \
 usb8xxx-objs += if_bootcmd.o
 usb8xxx-objs += if_usb.o
 
+obj-$(CONFIG_LIBERTAS)     += libertas.o
 obj-$(CONFIG_LIBERTAS_USB) += usb8xxx.o
-

drivers/net/wireless/libertas/README

 ================================================================================
 			README for USB8388
 
- (c) Copyright © 2003-2006, Marvell International Ltd.
+ (c) Copyright © 2003-2006, Marvell International Ltd.
  All Rights Reserved
 
  This software file (the "File") is distributed by Marvell International
@@ -47,15 +47,19 @@ Version 5 Command:
 	iwpriv ethX ledgpio <n>
 
 BT Commands:
-	The blinding table (BT) contains a list of mac addresses that should be
-	ignored by the firmware.  It is primarily used for debugging and
-	testing networks.  It can be edited and inspected with the following
-	commands:
+	The blinding table (BT) contains a list of mac addresses that will be,
+	by default, ignored by the firmware. It is also possible to invert this
+	behavior so that we will ignore all traffic except for the portion
+	coming from mac addresess in the list. It is primarily used for
+	debugging and testing networks.  It can be edited and inspected with
+	the following commands:
 
 	iwpriv ethX bt_reset
 	iwpriv ethX bt_add <mac_address>
 	iwpriv ethX bt_del <mac_address>
 	iwpriv ethX bt_list <id>
+	iwpriv ethX bt_get_invert <n>
+	iwpriv ethX bt_set_invert <n>
 
 FWT Commands:
 	The forwarding table (FWT) is a feature used to manage mesh network
@@ -135,7 +139,7 @@ fwt_add
 	This command is used to insert an entry into the FWT table. The list of
 	parameters must follow the following structure:
 
-	iwpriv ethX fwt_add da ra [metric dir ssn dsn hopcount ttl expiration sleepmode snr]
+	iwpriv ethX fwt_add da ra [metric dir rate ssn dsn hopcount ttl expiration sleepmode snr]
 
 	The parameters between brackets are optional, but they must appear in
 	the order specified.  For example, if you want to specify the metric,
@@ -150,6 +154,9 @@ fwt_add
 				   preferred, default is 0)
 		dir		-- direction (1 for direct, 0 for reverse,
 				   default is 1)
+		rate		-- data rate used for transmission to the RA,
+				   as specified for the rateadapt command,
+				   default is 3 (11Mbps)
 		ssn		-- Source Sequence Number (time at the RA for
 				   reverse routes.  Default is 0)
 		dsn		-- Destination Sequence Number (time at the DA
@@ -207,13 +214,17 @@ fwt_list
 
 	The output is a string of the following form:
 
-		da ra metric dir ssn dsn hopcount ttl expiration sleepmode snr
+		da ra valid metric dir rate ssn dsn hopcount ttl expiration
+		sleepmode snr precursor
 
 	where the different fields are:-
 		da		-- DA MAC address (in the form "00:11:22:33:44:55")
 		ra		-- RA MAC address (in the form "00:11:22:33:44:55")
+		valid		-- whether the route is valid (0 if not valid)
 		metric		-- route metric (cost: smaller-metric routes are preferred)
 		dir		-- direction (1 for direct, 0 for reverse)
+		rate		-- data rate used for transmission to the RA,
+				   as specified for the rateadapt command
 		ssn		-- Source Sequence Number (time at the RA for reverse routes)
 		dsn		-- Destination Sequence Number (time at the DA for direct routes)
 		hopcount	-- hop count (currently unused)
@@ -221,33 +232,10 @@ fwt_list
 		expiration	-- entry expiration (in ticks, where a tick is 1024us, or ~ 1ms. Use 0 for an indefinite entry)
 		sleepmode	-- RA's sleep mode (currently unused)
 		snr		-- SNR in the link to RA (currently unused)
+		precursor	-- predecessor in direct routes
 
 fwt_list_route
-	This command is used to list a route from the FWT table. The only
-	parameter is the route ID. If you want to list all the routes in a
-	table, start with rid=0, and keep incrementing rid until you get a
-	"(null)" string. This function is similar to fwt_list. The only
-	difference is the output format.  Also note that this command is meant
-	for debugging.  It is expected that users will use fwt_lookup and
-	fwt_list.  One important reason for this is that the route id may change
-	as the route table is altered.
-
-		iwpriv ethX fwt_list_route rid
-
-	The output is a string of the following form:
-
-		da metric dir nid ssn dsn hopcount ttl expiration
-
-	where the different fields are:-
-		da		-- DA MAC address (in the form "00:11:22:33:44:55")
-		metric		-- route metric (cost: smaller-metric routes are preferred)
-		dir		-- direction (1 for direct, 0 for reverse)
-		nid		-- Next-hop (neighbor) host ID (nid)
-		ssn		-- Source Sequence Number (time at the RA for reverse routes)
-		dsn		-- Destination Sequence Number (time at the DA for direct routes)
-		hopcount	-- hop count (currently unused)
-		ttl		-- TTL count (only used in reverse entries)
-		expiration	-- entry expiration (in ticks, where a tick is 1024us, or ~ 1ms. Use 0 for an indefinite entry)
+	This command is equivalent to fwt_list.
 
 fwt_list_neigh
 	This command is used to list a neighbor from the FWT table. The only

drivers/net/wireless/libertas/assoc.h

@@ -5,7 +5,7 @@
 
 #include "dev.h"
 
-void wlan_association_worker(struct work_struct *work);
+void libertas_association_worker(struct work_struct *work);
 
 struct assoc_request * wlan_get_association_request(wlan_adapter *adapter);
 
@@ -21,9 +21,9 @@ static inline void wlan_postpone_association_work(wlan_private *priv)
 static inline void wlan_cancel_association_work(wlan_private *priv)
 {
 	cancel_delayed_work(&priv->assoc_work);
-	if (priv->adapter->assoc_req) {
-		kfree(priv->adapter->assoc_req);
-		priv->adapter->assoc_req = NULL;
+	if (priv->adapter->pending_assoc_req) {
+		kfree(priv->adapter->pending_assoc_req);
+		priv->adapter->pending_assoc_req = NULL;
 	}
 }
 

drivers/net/wireless/libertas/decl.h

@@ -6,6 +6,8 @@
 #ifndef _WLAN_DECL_H_
 #define _WLAN_DECL_H_
 
+#include <linux/device.h>
+
 #include "defs.h"
 
 /** Function Prototype Declaration */
@@ -66,18 +68,24 @@ void libertas_ps_wakeup(wlan_private * priv, int wait_option);
 
 void libertas_tx_runqueue(wlan_private *priv);
 
-extern struct chan_freq_power *libertas_find_cfp_by_band_and_channel(
+struct chan_freq_power *libertas_find_cfp_by_band_and_channel(
 				wlan_adapter * adapter, u8 band, u16 channel);
 
-extern void libertas_mac_event_disconnected(wlan_private * priv);
+void libertas_mac_event_disconnected(wlan_private * priv);
 
 void libertas_send_iwevcustom_event(wlan_private * priv, s8 * str);
 
-int reset_device(wlan_private *priv);
+/* fw.c */
+int libertas_init_fw(wlan_private * priv, char *fw_name);
+
 /* main.c */
-extern struct chan_freq_power *libertas_get_region_cfp_table(u8 region, u8 band,
+struct chan_freq_power *libertas_get_region_cfp_table(u8 region, u8 band,
 						             int *cfp_no);
-wlan_private *wlan_add_card(void *card);
-int wlan_remove_card(void *card);
+wlan_private *libertas_add_card(void *card, struct device *dmdev);
+int libertas_activate_card(wlan_private *priv, char *fw_name);
+int libertas_remove_card(wlan_private *priv);
+int libertas_add_mesh(wlan_private *priv, struct device *dev);
+void libertas_remove_mesh(wlan_private *priv);
+
 
 #endif				/* _WLAN_DECL_H_ */

drivers/net/wireless/libertas/defs.h

@@ -7,14 +7,79 @@
 
 #include <linux/spinlock.h>
 
-extern unsigned int libertas_debug;
-
 #ifdef CONFIG_LIBERTAS_DEBUG
 #define DEBUG
 #define PROC_DEBUG
 #endif
 
-#define DRV_NAME		"usb8xxx"
+#ifndef DRV_NAME
+#define DRV_NAME "libertas"
+#endif
+
+
+#define LBS_DEB_ENTER	0x00000001
+#define LBS_DEB_LEAVE	0x00000002
+#define LBS_DEB_MAIN	0x00000004
+#define LBS_DEB_NET	0x00000008
+#define LBS_DEB_MESH	0x00000010
+#define LBS_DEB_WEXT	0x00000020
+#define LBS_DEB_IOCTL	0x00000040
+#define LBS_DEB_SCAN	0x00000080
+#define LBS_DEB_ASSOC	0x00000100
+#define LBS_DEB_JOIN	0x00000200
+#define LBS_DEB_11D	0x00000400
+#define LBS_DEB_DEBUGFS	0x00000800
+#define LBS_DEB_ETHTOOL	0x00001000
+#define LBS_DEB_HOST	0x00002000
+#define LBS_DEB_CMD	0x00004000
+#define LBS_DEB_RX	0x00008000
+#define LBS_DEB_TX	0x00010000
+#define LBS_DEB_USB	0x00020000
+#define LBS_DEB_CS	0x00040000
+#define LBS_DEB_FW	0x00080000
+#define LBS_DEB_THREAD	0x00100000
+#define LBS_DEB_HEX	0x00200000
+
+extern unsigned int libertas_debug;
+
+#ifdef DEBUG
+#define LBS_DEB_LL(grp, fmt, args...) \
+do { if ((libertas_debug & (grp)) == (grp)) \
+  printk(KERN_DEBUG DRV_NAME "%s: " fmt, \
+         in_interrupt() ? " (INT)" : "", ## args); } while (0)
+#else
+#define LBS_DEB_LL(grp, fmt, args...) do {} while (0)
+#endif
+
+#define lbs_deb_enter(grp) \
+  LBS_DEB_LL(grp | LBS_DEB_ENTER, "%s():%d enter\n", __FUNCTION__, __LINE__);
+#define lbs_deb_enter_args(grp, fmt, args...) \
+  LBS_DEB_LL(grp | LBS_DEB_ENTER, "%s(" fmt "):%d\n", __FUNCTION__, ## args, __LINE__);
+#define lbs_deb_leave(grp) \
+  LBS_DEB_LL(grp | LBS_DEB_LEAVE, "%s():%d leave\n", __FUNCTION__, __LINE__);
+#define lbs_deb_leave_args(grp, fmt, args...) \
+  LBS_DEB_LL(grp | LBS_DEB_LEAVE, "%s():%d leave, " fmt "\n", \
+  __FUNCTION__, __LINE__, ##args);
+#define lbs_deb_main(fmt, args...)      LBS_DEB_LL(LBS_DEB_MAIN, fmt, ##args)
+#define lbs_deb_net(fmt, args...)       LBS_DEB_LL(LBS_DEB_NET, fmt, ##args)
+#define lbs_deb_mesh(fmt, args...)      LBS_DEB_LL(LBS_DEB_MESH, fmt, ##args)
+#define lbs_deb_wext(fmt, args...)      LBS_DEB_LL(LBS_DEB_WEXT, fmt, ##args)
+#define lbs_deb_ioctl(fmt, args...)     LBS_DEB_LL(LBS_DEB_IOCTL, fmt, ##args)
+#define lbs_deb_scan(fmt, args...)      LBS_DEB_LL(LBS_DEB_SCAN, fmt, ##args)
+#define lbs_deb_assoc(fmt, args...)     LBS_DEB_LL(LBS_DEB_ASSOC, fmt, ##args)
+#define lbs_deb_join(fmt, args...)      LBS_DEB_LL(LBS_DEB_JOIN, fmt, ##args)
+#define lbs_deb_11d(fmt, args...)       LBS_DEB_LL(LBS_DEB_11D, fmt, ##args)
+#define lbs_deb_debugfs(fmt, args...)   LBS_DEB_LL(LBS_DEB_DEBUGFS, fmt, ##args)
+#define lbs_deb_ethtool(fmt, args...)   LBS_DEB_LL(LBS_DEB_ETHTOOL, fmt, ##args)
+#define lbs_deb_host(fmt, args...)      LBS_DEB_LL(LBS_DEB_HOST, fmt, ##args)
+#define lbs_deb_cmd(fmt, args...)       LBS_DEB_LL(LBS_DEB_CMD, fmt, ##args)
+#define lbs_deb_rx(fmt, args...)        LBS_DEB_LL(LBS_DEB_RX, fmt, ##args)
+#define lbs_deb_tx(fmt, args...)        LBS_DEB_LL(LBS_DEB_TX, fmt, ##args)
+#define lbs_deb_fw(fmt, args...)        LBS_DEB_LL(LBS_DEB_FW, fmt, ##args)
+#define lbs_deb_usb(fmt, args...)       LBS_DEB_LL(LBS_DEB_USB, fmt, ##args)
+#define lbs_deb_usbd(dev, fmt, args...) LBS_DEB_LL(LBS_DEB_USB, "%s:" fmt, (dev)->bus_id, ##args)
+#define lbs_deb_cs(fmt, args...)        LBS_DEB_LL(LBS_DEB_CS, fmt, ##args)
+#define lbs_deb_thread(fmt, args...)    LBS_DEB_LL(LBS_DEB_THREAD, fmt, ##args)
 
 #define lbs_pr_info(format, args...) \
 	printk(KERN_INFO DRV_NAME": " format, ## args)
@@ -24,37 +89,25 @@ extern unsigned int libertas_debug;
 	printk(KERN_ALERT DRV_NAME": " format, ## args)
 
 #ifdef DEBUG
-#define lbs_pr_debug(level, format, args...) \
-	do { if (libertas_debug >= level) \
-	printk(KERN_INFO DRV_NAME": " format, ##args); } while (0)
-#define lbs_dev_dbg(level, device, format, args...) \
-        lbs_pr_debug(level, "%s: " format, \
-        (device)->bus_id , ## args)
-
 static inline void lbs_dbg_hex(char *prompt, u8 * buf, int len)
 {
 	int i = 0;
 
-	if (!libertas_debug)
+	if (!(libertas_debug & LBS_DEB_HEX))
 		return;
 
 	printk(KERN_DEBUG "%s: ", prompt);
 	for (i = 1; i <= len; i++) {
-		printk(KERN_DEBUG "%02x ", (u8) * buf);
+		printk("%02x ", (u8) * buf);
 		buf++;
 	}
 	printk("\n");
 }
 #else
-#define lbs_pr_debug(level, format, args...)		do {} while (0)
-#define lbs_dev_dbg(level, device, format, args...)	do {} while (0)
 #define lbs_dbg_hex(x,y,z)				do {} while (0)
 #endif
 
-#define	ENTER()			lbs_pr_debug(1, "Enter: %s, %s:%i\n", \
-					__FUNCTION__, __FILE__, __LINE__)
-#define	LEAVE()			lbs_pr_debug(1, "Leave: %s, %s:%i\n", \
-					__FUNCTION__, __FILE__, __LINE__)
+
 
 /** Buffer Constants */
 
@@ -74,7 +127,6 @@ static inline void lbs_dbg_hex(char *prompt, u8 * buf, int len)
 #define MRVDRV_NUM_OF_CMD_BUFFER        10
 #define MRVDRV_SIZE_OF_CMD_BUFFER       (2 * 1024)
 #define MRVDRV_MAX_CHANNEL_SIZE		14
-#define MRVDRV_MAX_BSSID_LIST		64
 #define MRVDRV_ASSOCIATION_TIME_OUT	255
 #define MRVDRV_SNAP_HEADER_LEN          8
 
@@ -104,6 +156,13 @@ static inline void lbs_dbg_hex(char *prompt, u8 * buf, int len)
 #define MRVDRV_MAX_BEACON_INTERVAL		1000
 #define MRVDRV_BEACON_INTERVAL			100
 
+/** INT status Bit Definition*/
+#define his_cmddnldrdy			0x01
+#define his_cardevent			0x02
+#define his_cmdupldrdy			0x04
+
+#define SBI_EVENT_CAUSE_SHIFT		3
+
 /** TxPD status */
 
 /*	Station firmware use TxPD status field to report final Tx transmit
@@ -205,8 +264,6 @@ typedef struct _wlan_adapter wlan_adapter;
 extern const char libertas_driver_version[];
 extern u16 libertas_region_code_to_index[MRVDRV_MAX_REGION_CODE];
 
-extern u8 libertas_wlan_data_rates[WLAN_SUPPORTED_RATES];
-
 extern u8 libertas_supported_rates[G_SUPPORTED_RATES];
 
 extern u8 libertas_adhoc_rates_g[G_SUPPORTED_RATES];
@@ -316,6 +373,8 @@ enum SNMP_MIB_VALUE_e {
 /* Default values for fwt commands. */
 #define FWT_DEFAULT_METRIC 0
 #define FWT_DEFAULT_DIR 1
+/* Default Rate, 11Mbps */
+#define FWT_DEFAULT_RATE 3
 #define FWT_DEFAULT_SSN 0xffffffff
 #define FWT_DEFAULT_DSN 0
 #define FWT_DEFAULT_HOPCOUNT 0

drivers/net/wireless/libertas/dev.h

@@ -63,11 +63,11 @@ struct wlan_802_11_security {
 
 /** Current Basic Service Set State Structure */
 struct current_bss_params {
-	struct bss_descriptor bssdescriptor;
 	/** bssid */
 	u8 bssid[ETH_ALEN];
 	/** ssid */
-	struct WLAN_802_11_SSID ssid;
+	u8 ssid[IW_ESSID_MAX_SIZE + 1];
+	u8 ssid_len;
 
 	/** band */
 	u8 band;
@@ -89,31 +89,6 @@ struct sleep_params {
 	u16 sp_reserved;
 };
 
-/** Data structure for the Marvell WLAN device */
-typedef struct _wlan_dev {
-	/** device name */
-	char name[DEV_NAME_LEN];
-	/** card pointer */
-	void *card;
-	/** IO port */
-	u32 ioport;
-	/** Upload received */
-	u32 upld_rcv;
-	/** Upload type */
-	u32 upld_typ;
-	/** Upload length */
-	u32 upld_len;
-	/** netdev pointer */
-	struct net_device *netdev;
-	/* Upload buffer */
-	u8 upld_buf[WLAN_UPLD_SIZE];
-	/* Download sent:
-	   bit0 1/0=data_sent/data_tx_done,
-	   bit1 1/0=cmd_sent/cmd_tx_done,
-	   all other bits reserved 0 */
-	u8 dnld_sent;
-} wlan_dev_t, *pwlan_dev_t;
-
 /* Mesh statistics */
 struct wlan_mesh_stats {
 	u32	fwd_bcast_cnt;		/* Fwd: Broadcast counter */
@@ -123,6 +98,7 @@ struct wlan_mesh_stats {
 	u32	fwd_drop_noroute; 	/* Fwd: No route to Destination */
 	u32	fwd_drop_nobuf;		/* Fwd: Run out of internal buffers */
 	u32	drop_blind;		/* Rx:  Dropped by blinding table */
+	u32	tx_failed_cnt;		/* Tx:  Failed transmissions */
 };
 
 /** Private structure for the MV device */
@@ -131,8 +107,11 @@ struct _wlan_private {
 	int mesh_open;
 	int infra_open;
 
+	char name[DEV_NAME_LEN];
+
+	void *card;
 	wlan_adapter *adapter;
-	wlan_dev_t wlan_dev;
+	struct net_device *dev;
 
 	struct net_device_stats stats;
 	struct net_device *mesh_dev ; /* Virtual device */
@@ -153,6 +132,16 @@ struct _wlan_private {
 	u32 bbp_offset;
 	u32 rf_offset;
 
+	/** Upload length */
+	u32 upld_len;
+	/* Upload buffer */
+	u8 upld_buf[WLAN_UPLD_SIZE];
+	/* Download sent:
+	   bit0 1/0=data_sent/data_tx_done,
+	   bit1 1/0=cmd_sent/cmd_tx_done,
+	   all other bits reserved 0 */
+	u8 dnld_sent;
+
 	const struct firmware *firmware;
 	struct device *hotplug_device;
 
@@ -161,6 +150,14 @@ struct _wlan_private {
 
 	struct delayed_work assoc_work;
 	struct workqueue_struct *assoc_thread;
+
+	/** Hardware access */
+	int (*hw_register_dev) (wlan_private * priv);
+	int (*hw_unregister_dev) (wlan_private *);
+	int (*hw_prog_firmware) (wlan_private *);
+	int (*hw_host_to_card) (wlan_private * priv, u8 type, u8 * payload, u16 nb);
+	int (*hw_get_int_status) (wlan_private * priv, u8 *);
+	int (*hw_read_event_cause) (wlan_private *);
 };
 
 /** Association request
@@ -171,18 +168,21 @@ struct _wlan_private {
 struct assoc_request {
 #define ASSOC_FLAG_SSID			1
 #define ASSOC_FLAG_CHANNEL		2
-#define ASSOC_FLAG_MODE			3
-#define ASSOC_FLAG_BSSID		4
-#define ASSOC_FLAG_WEP_KEYS		5
-#define ASSOC_FLAG_WEP_TX_KEYIDX	6
-#define ASSOC_FLAG_WPA_MCAST_KEY	7
-#define ASSOC_FLAG_WPA_UCAST_KEY	8
-#define ASSOC_FLAG_SECINFO		9
-#define ASSOC_FLAG_WPA_IE		10
+#define ASSOC_FLAG_BAND			3
+#define ASSOC_FLAG_MODE			4
+#define ASSOC_FLAG_BSSID		5
+#define ASSOC_FLAG_WEP_KEYS		6
+#define ASSOC_FLAG_WEP_TX_KEYIDX	7
+#define ASSOC_FLAG_WPA_MCAST_KEY	8
+#define ASSOC_FLAG_WPA_UCAST_KEY	9
+#define ASSOC_FLAG_SECINFO		10
+#define ASSOC_FLAG_WPA_IE		11
 	unsigned long flags;
 
-	struct WLAN_802_11_SSID ssid;
+	u8 ssid[IW_ESSID_MAX_SIZE + 1];
+	u8 ssid_len;
 	u8 channel;
+	u8 band;
 	u8 mode;
 	u8 bssid[ETH_ALEN];
 
@@ -199,12 +199,15 @@ struct assoc_request {
 	/** WPA Information Elements*/
 	u8 wpa_ie[MAX_WPA_IE_LEN];
 	u8 wpa_ie_len;
+
+	/* BSS to associate with for infrastructure of Ad-Hoc join */
+	struct bss_descriptor bss;
 };
 
 /** Wlan adapter data structure*/
 struct _wlan_adapter {
 	/** STATUS variables */
-	u32 fwreleasenumber;
+	u8 fwreleasenumber[4];
 	u32 fwcapinfo;
 	/* protected with big lock */
 
@@ -255,13 +258,14 @@ struct _wlan_adapter {
 	/* IW_MODE_* */
 	u8 mode;
 
-	struct bss_descriptor *pattemptedbssdesc;
-
-	struct WLAN_802_11_SSID previousssid;
-	u8 previousbssid[ETH_ALEN];
+	u8 prev_ssid[IW_ESSID_MAX_SIZE + 1];
+	u8 prev_ssid_len;
+	u8 prev_bssid[ETH_ALEN];
 
-	struct bss_descriptor *scantable;
-	u32 numinscantable;
+	/* Scan results list */
+	struct list_head network_list;
+	struct list_head network_free_list;
+	struct bss_descriptor *networks;
 
 	u8 scantype;
 	u32 scanmode;
@@ -288,7 +292,6 @@ struct _wlan_adapter {
 	u32 txantenna;
 	u32 rxantenna;
 
-	u8 adhocchannel;
 	u32 fragthsd;
 	u32 rtsthsd;
 
@@ -324,7 +327,8 @@ struct _wlan_adapter {
 	u16 locallisteninterval;
 	u16 nullpktinterval;
 
-	struct assoc_request * assoc_req;
+	struct assoc_request * pending_assoc_req;
+	struct assoc_request * in_progress_assoc_req;
 
 	/** Encryption parameter */
 	struct wlan_802_11_security secinfo;
@@ -396,6 +400,8 @@ struct _wlan_adapter {
 	u32 radiomode;
 	u32 debugmode;
 	u8 fw_ready;
+
+	u8 last_scanned_channel;
 };
 
 #endif				/* _WLAN_DEV_H_ */

drivers/net/wireless/libertas/ethtool.c

-
 #include <linux/netdevice.h>
 #include <linux/ethtool.h>
 #include <linux/delay.h>
 
 #include "host.h"
-#include "sbi.h"
 #include "decl.h"
 #include "defs.h"
 #include "dev.h"
@@ -17,7 +15,8 @@ static const char * mesh_stat_strings[]= {
 			"drop_no_buffers",
 			"fwded_unicast_cnt",
 			"fwded_bcast_cnt",
-			"drop_blind_table"
+			"drop_blind_table",
+			"tx_failed_cnt"
 };
 
 static void libertas_ethtool_get_drvinfo(struct net_device *dev,
@@ -69,7 +68,7 @@ static int libertas_ethtool_get_eeprom(struct net_device *dev,
 
 	/* +14 is for action, offset, and NOB in
 	 * response */
-	lbs_pr_debug(1, "action:%d offset: %x NOB: %02x\n",
+	lbs_deb_ethtool("action:%d offset: %x NOB: %02x\n",
 	       regctrl.action, regctrl.offset, regctrl.NOB);
 
 	ret = libertas_prepare_and_send_command(priv,
@@ -81,8 +80,7 @@ static int libertas_ethtool_get_eeprom(struct net_device *dev,
 	if (ret) {
 		if (adapter->prdeeprom)
 			kfree(adapter->prdeeprom);
-		LEAVE();
-			return ret;
+		goto done;
 	}
 
 	mdelay(10);
@@ -101,7 +99,11 @@ static int libertas_ethtool_get_eeprom(struct net_device *dev,
 		kfree(adapter->prdeeprom);
 //	mutex_unlock(&priv->mutex);
 
-        return 0;
+	ret = 0;
+
+done:
+	lbs_deb_enter_args(LBS_DEB_ETHTOOL, "ret %d", ret);
+        return ret;
 }
 
 static void libertas_ethtool_get_stats(struct net_device * dev,
@@ -109,7 +111,7 @@ static void libertas_ethtool_get_stats(struct net_device * dev,
 {
 	wlan_private *priv = dev->priv;
 
-	ENTER();
+	lbs_deb_enter(LBS_DEB_ETHTOOL);
 
 	stats->cmd = ETHTOOL_GSTATS;
 	BUG_ON(stats->n_stats != MESH_STATS_NUM);
@@ -121,8 +123,9 @@ static void libertas_ethtool_get_stats(struct net_device * dev,
         data[4] = priv->mstats.fwd_unicast_cnt;
         data[5] = priv->mstats.fwd_bcast_cnt;
         data[6] = priv->mstats.drop_blind;
+        data[7] = priv->mstats.tx_failed_cnt;
 
-	LEAVE();
+	lbs_deb_enter(LBS_DEB_ETHTOOL);
 }
 
 static int libertas_ethtool_get_stats_count(struct net_device * dev)
@@ -131,27 +134,32 @@ static int libertas_ethtool_get_stats_count(struct net_device * dev)
 	wlan_private *priv = dev->priv;
 	struct cmd_ds_mesh_access mesh_access;
 
-	ENTER();
+	lbs_deb_enter(LBS_DEB_ETHTOOL);
+
 	/* Get Mesh Statistics */
 	ret = libertas_prepare_and_send_command(priv,
 			cmd_mesh_access, cmd_act_mesh_get_stats,
 			cmd_option_waitforrsp, 0, &mesh_access);
 
 	if (ret) {
-		LEAVE();
-		return 0;
+		ret = 0;
+		goto done;
 	}
 
-        priv->mstats.fwd_drop_rbt = mesh_access.data[0];
-        priv->mstats.fwd_drop_ttl = mesh_access.data[1];
-        priv->mstats.fwd_drop_noroute = mesh_access.data[2];
-        priv->mstats.fwd_drop_nobuf = mesh_access.data[3];
-        priv->mstats.fwd_unicast_cnt = mesh_access.data[4];
-        priv->mstats.fwd_bcast_cnt = mesh_access.data[5];
-        priv->mstats.drop_blind = mesh_access.data[6];
+        priv->mstats.fwd_drop_rbt = le32_to_cpu(mesh_access.data[0]);
+        priv->mstats.fwd_drop_ttl = le32_to_cpu(mesh_access.data[1]);
+        priv->mstats.fwd_drop_noroute = le32_to_cpu(mesh_access.data[2]);
+        priv->mstats.fwd_drop_nobuf = le32_to_cpu(mesh_access.data[3]);
+        priv->mstats.fwd_unicast_cnt = le32_to_cpu(mesh_access.data[4]);
+        priv->mstats.fwd_bcast_cnt = le32_to_cpu(mesh_access.data[5]);
+        priv->mstats.drop_blind = le32_to_cpu(mesh_access.data[6]);
+        priv->mstats.tx_failed_cnt = le32_to_cpu(mesh_access.data[7]);
+
+	ret = MESH_STATS_NUM;
 
-	LEAVE();
-	return MESH_STATS_NUM;
+done:
+	lbs_deb_enter_args(LBS_DEB_ETHTOOL, "ret %d", ret);
+	return ret;
 }
 
 static void libertas_ethtool_get_strings (struct net_device * dev,
@@ -160,7 +168,8 @@ static void libertas_ethtool_get_strings (struct net_device * dev,
 {
 	int i;
 
-	ENTER();
+	lbs_deb_enter(LBS_DEB_ETHTOOL);
+
 	switch (stringset) {
         case ETH_SS_STATS:
 		for (i=0; i < MESH_STATS_NUM; i++) {
@@ -170,7 +179,7 @@ static void libertas_ethtool_get_strings (struct net_device * dev,
 		}
 		break;
         }
-	LEAVE();
+	lbs_deb_enter(LBS_DEB_ETHTOOL);
 }
 
 struct ethtool_ops libertas_ethtool_ops = {

drivers/net/wireless/libertas/fw.h

-/**
-  * This header file contains FW interface related definitions.
-  */
-#ifndef _WLAN_FW_H_
-#define _WLAN_FW_H_
-
-#ifndef DEV_NAME_LEN
-#define DEV_NAME_LEN            32
-#endif
-
-int libertas_init_fw(wlan_private * priv);
-
-#endif				/* _WLAN_FW_H_ */

drivers/net/wireless/libertas/host.h

@@ -99,11 +99,11 @@
 #define cmd_bt_access                 0x0087
 #define cmd_ret_bt_access                 0x8087
 
-#define cmd_fwt_access                0x0088
-#define cmd_ret_fwt_access                0x8088
+#define cmd_fwt_access                0x0095
+#define cmd_ret_fwt_access                0x8095
 
-#define cmd_mesh_access               0x0090
-#define cmd_ret_mesh_access               0x8090
+#define cmd_mesh_access               0x009b
+#define cmd_ret_mesh_access               0x809b
 
 /* For the IEEE Power Save */
 #define cmd_subcmd_enter_ps               0x0030
@@ -287,7 +287,9 @@ enum cmd_bt_access_opts {
 	cmd_act_bt_access_add = 5,
 	cmd_act_bt_access_del,
 	cmd_act_bt_access_list,
-	cmd_act_bt_access_reset
+	cmd_act_bt_access_reset,
+	cmd_act_bt_access_set_invert,
+	cmd_act_bt_access_get_invert
 };
 
 /* Define action or option for cmd_fwt_access */
@@ -334,5 +336,6 @@ enum cmd_mesh_access_opts {
 #define MACREG_INT_CODE_MAX_FAIL		0x0000001b
 #define MACREG_INT_CODE_RSSI_HIGH		0x0000001c
 #define MACREG_INT_CODE_SNR_HIGH		0x0000001d
+#define MACREG_INT_CODE_MESH_AUTO_STARTED	0x00000023
 
 #endif				/* _HOST_H_ */

drivers/net/wireless/libertas/if_bootcmd.c

@@ -8,6 +8,8 @@
 #include <linux/netdevice.h>
 #include <linux/usb.h>
 
+#define DRV_NAME "usb8xxx"
+
 #include "defs.h"
 #include "dev.h"
 #include "if_usb.h"
@@ -20,12 +22,12 @@
  */
 int if_usb_issue_boot_command(wlan_private *priv, int ivalue)
 {
-	struct usb_card_rec	*cardp = priv->wlan_dev.card;
+	struct usb_card_rec	*cardp = priv->card;
 	struct bootcmdstr	sbootcmd;
 	int i;
 
 	/* Prepare command */
-	sbootcmd.u32magicnumber = BOOT_CMD_MAGIC_NUMBER;
+	sbootcmd.u32magicnumber = cpu_to_le32(BOOT_CMD_MAGIC_NUMBER);
 	sbootcmd.u8cmd_tag = ivalue;
 	for (i=0; i<11; i++)
 		sbootcmd.au8dumy[i]=0x00;

drivers/net/wireless/libertas/if_usb.h

+#ifndef _LIBERTAS_IF_USB_H
+#define _LIBERTAS_IF_USB_H
+
+#include <linux/list.h>
+
 /**
   * This file contains definition for USB interface.
   */
@@ -7,11 +12,6 @@
 
 #define IPFIELD_ALIGN_OFFSET	2
 
-#define USB8388_VID_1	0x1286
-#define USB8388_PID_1	0x2001
-#define USB8388_VID_2	0x05a3
-#define USB8388_PID_2	0x8388
-
 #define BOOT_CMD_FW_BY_USB     0x01
 #define BOOT_CMD_FW_IN_EEPROM  0x02
 #define BOOT_CMD_UPDATE_BOOT2  0x03
@@ -20,7 +20,7 @@
 
 struct bootcmdstr
 {
-	u32 u32magicnumber;
+	__le32 u32magicnumber;
 	u8  u8cmd_tag;
 	u8  au8dumy[11];
 };
@@ -30,7 +30,7 @@ struct bootcmdstr
 
 struct bootcmdrespStr
 {
-	u32 u32magicnumber;
+	__le32 u32magicnumber;
 	u8  u8cmd_tag;
 	u8  u8result;
 	u8  au8dumy[2];
@@ -44,6 +44,7 @@ struct read_cb_info {
 
 /** USB card description structure*/
 struct usb_card_rec {
+	struct list_head list;
 	struct net_device *eth_dev;
 	struct usb_device *udev;
 	struct urb *rx_urb, *tx_urb;
@@ -75,33 +76,34 @@ struct usb_card_rec {
 
 /** fwheader */
 struct fwheader {
-	u32 dnldcmd;
-	u32 baseaddr;
-	u32 datalength;
-	u32 CRC;
+	__le32 dnldcmd;
+	__le32 baseaddr;
+	__le32 datalength;
+	__le32 CRC;
 };
 
 #define FW_MAX_DATA_BLK_SIZE	600
 /** FWData */
 struct FWData {
 	struct fwheader fwheader;
-	u32 seqnum;
+	__le32 seqnum;
 	u8 data[FW_MAX_DATA_BLK_SIZE];
 };
 
 /** fwsyncheader */
 struct fwsyncheader {
-	u32 cmd;
-	u32 seqnum;
+	__le32 cmd;
+	__le32 seqnum;
 };
 
 #define FW_HAS_DATA_TO_RECV		0x00000001
 #define FW_HAS_LAST_BLOCK		0x00000004
 
 #define FW_DATA_XMIT_SIZE \
-	sizeof(struct fwheader) + fwdata->fwheader.datalength + sizeof(u32)
+	sizeof(struct fwheader) + le32_to_cpu(fwdata->fwheader.datalength) + sizeof(u32)
 
 int usb_tx_block(wlan_private *priv, u8 *payload, u16 nb);
 void if_usb_free(struct usb_card_rec *cardp);
 int if_usb_issue_boot_command(wlan_private *priv, int ivalue);
 
+#endif

drivers/net/wireless/libertas/join.h

@@ -9,6 +9,7 @@
 #define _WLAN_JOIN_H
 
 #include "defs.h"
+#include "dev.h"
 
 struct cmd_ds_command;
 extern int libertas_cmd_80211_authenticate(wlan_private * priv,
@@ -21,7 +22,7 @@ extern int libertas_cmd_80211_ad_hoc_stop(wlan_private * priv,
 				       struct cmd_ds_command *cmd);
 extern int libertas_cmd_80211_ad_hoc_start(wlan_private * priv,
 					struct cmd_ds_command *cmd,
-					void *pssid);
+					void *pdata_buf);
 extern int libertas_cmd_80211_deauthenticate(wlan_private * priv,
 					  struct cmd_ds_command *cmd);
 extern int libertas_cmd_80211_associate(wlan_private * priv,
@@ -39,12 +40,10 @@ extern int libertas_ret_80211_associate(wlan_private * priv,
 
 extern int libertas_reassociation_thread(void *data);
 
-struct WLAN_802_11_SSID;
-struct bss_descriptor;
-
 extern int libertas_start_adhoc_network(wlan_private * priv,
-			     struct WLAN_802_11_SSID *adhocssid);
-extern int libertas_join_adhoc_network(wlan_private * priv, struct bss_descriptor *pbssdesc);
+			     struct assoc_request * assoc_req);
+extern int libertas_join_adhoc_network(wlan_private * priv,
+				struct assoc_request * assoc_req);
 extern int libertas_stop_adhoc_network(wlan_private * priv);
 
 extern int libertas_send_deauthentication(wlan_private * priv);
@@ -52,6 +51,6 @@ extern int libertas_send_deauth(wlan_private * priv);
 
 extern int libertas_do_adhocstop_ioctl(wlan_private * priv);
 
-int wlan_associate(wlan_private * priv, struct bss_descriptor * pbssdesc);
+int wlan_associate(wlan_private * priv, struct assoc_request * assoc_req);
 
 #endif

drivers/net/wireless/libertas/sbi.h

-/**
-  * This file contains IF layer definitions.
-  */
-
-#ifndef	_SBI_H_
-#define	_SBI_H_
-
-#include <linux/interrupt.h>
-
-#include "defs.h"
-
-/** INT status Bit Definition*/
-#define his_cmddnldrdy			0x01
-#define his_cardevent			0x02
-#define his_cmdupldrdy			0x04
-
-#ifndef DEV_NAME_LEN
-#define DEV_NAME_LEN			32
-#endif
-
-#define SBI_EVENT_CAUSE_SHIFT		3
-
-/* Probe and Check if the card is present*/
-int libertas_sbi_register_dev(wlan_private * priv);
-int libertas_sbi_unregister_dev(wlan_private *);
-int libertas_sbi_get_int_status(wlan_private * priv, u8 *);
-int libertas_sbi_register(void);
-void libertas_sbi_unregister(void);
-int libertas_sbi_prog_firmware(wlan_private *);
-
-int libertas_sbi_read_event_cause(wlan_private *);
-int libertas_sbi_host_to_card(wlan_private * priv, u8 type, u8 * payload, u16 nb);
-wlan_private *libertas_sbi_get_priv(void *card);
-
-#ifdef ENABLE_PM
-int libertas_sbi_suspend(wlan_private *);
-int libertas_sbi_resume(wlan_private *);
-#endif
-
-#endif				/* _SBI_H */

drivers/net/wireless/libertas/wext.h

@@ -20,10 +20,12 @@
 #define WLAN_SUBCMD_FWT_CLEANUP			15
 #define WLAN_SUBCMD_FWT_TIME			16
 #define WLAN_SUBCMD_MESH_GET_TTL		17
+#define WLAN_SUBCMD_BT_GET_INVERT		18
 
 #define WLAN_SETONEINT_GETNONE		(WLANIOCTL + 24)
 #define WLANSETREGION				8
 #define WLAN_SUBCMD_MESH_SET_TTL		18
+#define WLAN_SUBCMD_BT_SET_INVERT		19
 
 #define WLAN_SET128CHAR_GET128CHAR	(WLANIOCTL + 25)
 #define WLAN_SUBCMD_BT_ADD			18
@@ -56,6 +58,7 @@ struct wlan_ioctl_regrdwr {
 };
 
 extern struct iw_handler_def libertas_handler_def;
+extern struct iw_handler_def mesh_handler_def;
 int libertas_do_ioctl(struct net_device *dev, struct ifreq *req, int i);
 int wlan_radio_ioctl(wlan_private * priv, u8 option);