Merge with rsync://rsync.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git

Documentation/cpu-freq/cpufreq-stats.txt

+
+     CPU frequency and voltage scaling statictics in the Linux(TM) kernel
+
+
+             L i n u x    c p u f r e q - s t a t s   d r i v e r
+
+                       - information for users -
+
+
+             Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
+
+Contents
+1. Introduction
+2. Statistics Provided (with example)
+3. Configuring cpufreq-stats
+
+
+1. Introduction
+
+cpufreq-stats is a driver that provices CPU frequency statistics for each CPU.
+This statistics is provided in /sysfs as a bunch of read_only interfaces. This
+interface (when configured) will appear in a seperate directory under cpufreq
+in /sysfs (<sysfs root>/devices/system/cpu/cpuX/cpufreq/stats/) for each CPU.
+Various statistics will form read_only files under this directory.
+
+This driver is designed to be independent of any particular cpufreq_driver
+that may be running on your CPU. So, it will work with any cpufreq_driver.
+
+
+2. Statistics Provided (with example)
+
+cpufreq stats provides following statistics (explained in detail below).
+-  time_in_state
+-  total_trans
+-  trans_table
+
+All the statistics will be from the time the stats driver has been inserted 
+to the time when a read of a particular statistic is done. Obviously, stats 
+driver will not have any information about the the frequcny transitions before
+the stats driver insertion.
+
+--------------------------------------------------------------------------------
+<mysystem>:/sys/devices/system/cpu/cpu0/cpufreq/stats # ls -l
+total 0
+drwxr-xr-x  2 root root    0 May 14 16:06 .
+drwxr-xr-x  3 root root    0 May 14 15:58 ..
+-r--r--r--  1 root root 4096 May 14 16:06 time_in_state
+-r--r--r--  1 root root 4096 May 14 16:06 total_trans
+-r--r--r--  1 root root 4096 May 14 16:06 trans_table
+--------------------------------------------------------------------------------
+
+-  time_in_state
+This gives the amount of time spent in each of the frequencies supported by
+this CPU. The cat output will have "<frequency> <time>" pair in each line, which
+will mean this CPU spent <time> usertime units of time at <frequency>. Output
+will have one line for each of the supported freuencies. usertime units here 
+is 10mS (similar to other time exported in /proc).
+
+--------------------------------------------------------------------------------
+<mysystem>:/sys/devices/system/cpu/cpu0/cpufreq/stats # cat time_in_state 
+3600000 2089
+3400000 136
+3200000 34
+3000000 67
+2800000 172488
+--------------------------------------------------------------------------------
+
+
+-  total_trans
+This gives the total number of frequency transitions on this CPU. The cat 
+output will have a single count which is the total number of frequency
+transitions.
+
+--------------------------------------------------------------------------------
+<mysystem>:/sys/devices/system/cpu/cpu0/cpufreq/stats # cat total_trans
+20
+--------------------------------------------------------------------------------
+
+-  trans_table
+This will give a fine grained information about all the CPU frequency
+transitions. The cat output here is a two dimensional matrix, where an entry
+<i,j> (row i, column j) represents the count of number of transitions from 
+Freq_i to Freq_j. Freq_i is in descending order with increasing rows and 
+Freq_j is in descending order with increasing columns. The output here also 
+contains the actual freq values for each row and column for better readability.
+
+--------------------------------------------------------------------------------
+<mysystem>:/sys/devices/system/cpu/cpu0/cpufreq/stats # cat trans_table
+   From  :    To
+         :   3600000   3400000   3200000   3000000   2800000 
+  3600000:         0         5         0         0         0 
+  3400000:         4         0         2         0         0 
+  3200000:         0         1         0         2         0 
+  3000000:         0         0         1         0         3 
+  2800000:         0         0         0         2         0 
+--------------------------------------------------------------------------------
+
+
+3. Configuring cpufreq-stats
+
+To configure cpufreq-stats in your kernel
+Config Main Menu
+	Power management options (ACPI, APM)  --->
+		CPU Frequency scaling  --->
+			[*] CPU Frequency scaling
+			<*>   CPU frequency translation statistics 
+			[*]     CPU frequency translation statistics details
+
+
+"CPU Frequency scaling" (CONFIG_CPU_FREQ) should be enabled to configure
+cpufreq-stats.
+
+"CPU frequency translation statistics" (CONFIG_CPU_FREQ_STAT) provides the
+basic statistics which includes time_in_state and total_trans.
+
+"CPU frequency translation statistics details" (CONFIG_CPU_FREQ_STAT_DETAILS)
+provides fine grained cpufreq stats by trans_table. The reason for having a
+seperate config option for trans_table is:
+- trans_table goes against the traditional /sysfs rule of one value per
+  interface. It provides a whole bunch of value in a 2 dimensional matrix
+  form.
+
+Once these two options are enabled and your CPU supports cpufrequency, you
+will be able to see the CPU frequency statistics in /sysfs.
+
+
+
+

MAINTAINERS

@@ -239,6 +239,12 @@ L:	linux-usb-devel@lists.sourceforge.net
 W:	http://www.linux-usb.org/SpeedTouch/
 S:	Maintained
 
+ALI1563 I2C DRIVER
+P:	Rudolf Marek
+M:	r.marek@sh.cvut.cz
+L:	sensors@stimpy.netroedge.com
+S:	Maintained
+
 ALPHA PORT
 P:	Richard Henderson
 M:	rth@twiddle.net

arch/h8300/kernel/process.c

@@ -54,7 +54,7 @@ asmlinkage void ret_from_fork(void);
 void default_idle(void)
 {
 	while(1) {
-		if (need_resched()) {
+		if (!need_resched()) {
 			local_irq_enable();
 			__asm__("sleep");
 			local_irq_disable();

arch/i386/kernel/cpu/cpufreq/Kconfig

@@ -23,7 +23,7 @@ config X86_ACPI_CPUFREQ
 	  If in doubt, say N.
 
 config ELAN_CPUFREQ
-	tristate "AMD Elan"
+	tristate "AMD Elan SC400 and SC410"
 	select CPU_FREQ_TABLE
 	depends on X86_ELAN
 	---help---
@@ -38,6 +38,18 @@ config ELAN_CPUFREQ
 
 	  If in doubt, say N.
 
+config SC520_CPUFREQ
+	tristate "AMD Elan SC520"
+	select CPU_FREQ_TABLE
+	depends on X86_ELAN
+	---help---
+	  This adds the CPUFreq driver for AMD Elan SC520 processor.
+
+	  For details, take a look at <file:Documentation/cpu-freq/>.
+
+	  If in doubt, say N.
+
+
 config X86_POWERNOW_K6
 	tristate "AMD Mobile K6-2/K6-3 PowerNow!"
 	select CPU_FREQ_TABLE

arch/i386/kernel/cpu/cpufreq/Makefile

@@ -3,6 +3,7 @@ obj-$(CONFIG_X86_POWERNOW_K7)		+= powernow-k7.o
 obj-$(CONFIG_X86_POWERNOW_K8)		+= powernow-k8.o
 obj-$(CONFIG_X86_LONGHAUL)		+= longhaul.o
 obj-$(CONFIG_ELAN_CPUFREQ)		+= elanfreq.o
+obj-$(CONFIG_SC520_CPUFREQ)		+= sc520_freq.o
 obj-$(CONFIG_X86_LONGRUN)		+= longrun.o  
 obj-$(CONFIG_X86_GX_SUSPMOD)		+= gx-suspmod.o
 obj-$(CONFIG_X86_SPEEDSTEP_ICH)		+= speedstep-ich.o

arch/i386/kernel/cpu/cpufreq/longhaul.c

@@ -29,6 +29,7 @@
 #include <linux/cpufreq.h>
 #include <linux/slab.h>
 #include <linux/string.h>
+#include <linux/pci.h>
 
 #include <asm/msr.h>
 #include <asm/timex.h>
@@ -119,7 +120,13 @@ static int longhaul_get_cpu_mult(void)
 static void do_powersaver(union msr_longhaul *longhaul,
 			unsigned int clock_ratio_index)
 {
+	struct pci_dev *dev;
+	unsigned long flags;
+	unsigned int tmp_mask;
 	int version;
+	int i;
+	u16 pci_cmd;
+	u16 cmd_state[64];
 
 	switch (cpu_model) {
 	case CPU_EZRA_T:
@@ -137,17 +144,58 @@ static void do_powersaver(union msr_longhaul *longhaul,
 	longhaul->bits.SoftBusRatio4 = (clock_ratio_index & 0x10) >> 4;
 	longhaul->bits.EnableSoftBusRatio = 1;
 	longhaul->bits.RevisionKey = 0;
-	local_irq_disable();
-	wrmsrl(MSR_VIA_LONGHAUL, longhaul->val);
+
+	preempt_disable();
+	local_irq_save(flags);
+
+	/*
+	 * get current pci bus master state for all devices
+	 * and clear bus master bit
+	 */
+	dev = NULL;
+	i = 0;
+	do {
+		dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev);
+		if (dev != NULL) {
+			pci_read_config_word(dev, PCI_COMMAND, &pci_cmd);
+			cmd_state[i++] = pci_cmd;
+			pci_cmd &= ~PCI_COMMAND_MASTER;
+			pci_write_config_word(dev, PCI_COMMAND, pci_cmd);
+		}
+	} while (dev != NULL);
+
+	tmp_mask=inb(0x21);	/* works on C3. save mask. */
+	outb(0xFE,0x21);	/* TMR0 only */
+	outb(0xFF,0x80);	/* delay */
+
 	local_irq_enable();
+
+	__hlt();
+	wrmsrl(MSR_VIA_LONGHAUL, longhaul->val);
 	__hlt();
 
+	local_irq_disable();
+
+	outb(tmp_mask,0x21);	/* restore mask */
+
+	/* restore pci bus master state for all devices */
+	dev = NULL;
+	i = 0;
+	do {
+		dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev);
+		if (dev != NULL) {
+			pci_cmd = cmd_state[i++];
+			pci_write_config_byte(dev, PCI_COMMAND, pci_cmd);
+		}
+	} while (dev != NULL);
+	local_irq_restore(flags);
+	preempt_enable();
+
+	/* disable bus ratio bit */
 	rdmsrl(MSR_VIA_LONGHAUL, longhaul->val);
 	longhaul->bits.EnableSoftBusRatio = 0;
 	longhaul->bits.RevisionKey = version;
-	local_irq_disable();
 	wrmsrl(MSR_VIA_LONGHAUL, longhaul->val);
-	local_irq_enable();
 }
 
 /**
@@ -578,7 +626,7 @@ static int __init longhaul_cpu_init(struct cpufreq_policy *policy)
 		longhaul_setup_voltagescaling();
 
 	policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
-	policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
+	policy->cpuinfo.transition_latency = 200000;	/* nsec */
 	policy->cur = calc_speed(longhaul_get_cpu_mult());
 
 	ret = cpufreq_frequency_table_cpuinfo(policy, longhaul_table);

arch/i386/kernel/cpu/cpufreq/powernow-k7.c

@@ -23,6 +23,7 @@
 #include <linux/dmi.h>
 
 #include <asm/msr.h>
+#include <asm/timer.h>
 #include <asm/timex.h>
 #include <asm/io.h>
 #include <asm/system.h>
@@ -586,13 +587,17 @@ static int __init powernow_cpu_init (struct cpufreq_policy *policy)
 
 	rdmsrl (MSR_K7_FID_VID_STATUS, fidvidstatus.val);
 
-	/* A K7 with powernow technology is set to max frequency by BIOS */
-	fsb = (10 * cpu_khz) / fid_codes[fidvidstatus.bits.MFID];
+	/* recalibrate cpu_khz */
+	result = recalibrate_cpu_khz();
+	if (result)
+		return result;
+
+	fsb = (10 * cpu_khz) / fid_codes[fidvidstatus.bits.CFID];
 	if (!fsb) {
 		printk(KERN_WARNING PFX "can not determine bus frequency\n");
 		return -EINVAL;
 	}
-	dprintk("FSB: %3d.%03d MHz\n", fsb/1000, fsb%1000);
+	dprintk("FSB: %3dMHz\n", fsb/1000);
 
 	if (dmi_check_system(powernow_dmi_table) || acpi_force) {
 		printk (KERN_INFO PFX "PSB/PST known to be broken.  Trying ACPI instead\n");

arch/i386/kernel/cpu/cpufreq/powernow-k8.c

@@ -4,7 +4,7 @@
  *  GNU general public license version 2. See "COPYING" or
  *  http://www.gnu.org/licenses/gpl.html
  *
- *  Support : paul.devriendt@amd.com
+ *  Support : mark.langsdorf@amd.com
  *
  *  Based on the powernow-k7.c module written by Dave Jones.
  *  (C) 2003 Dave Jones <davej@codemonkey.org.uk> on behalf of SuSE Labs
@@ -15,6 +15,7 @@
  *
  *  Valuable input gratefully received from Dave Jones, Pavel Machek,
  *  Dominik Brodowski, and others.
+ *  Originally developed by Paul Devriendt.
  *  Processor information obtained from Chapter 9 (Power and Thermal Management)
  *  of the "BIOS and Kernel Developer's Guide for the AMD Athlon 64 and AMD
  *  Opteron Processors" available for download from www.amd.com
@@ -30,6 +31,7 @@
 #include <linux/cpufreq.h>
 #include <linux/slab.h>
 #include <linux/string.h>
+#include <linux/cpumask.h>
 
 #include <asm/msr.h>
 #include <asm/io.h>
@@ -42,7 +44,7 @@
 
 #define PFX "powernow-k8: "
 #define BFX PFX "BIOS error: "
-#define VERSION "version 1.00.09e"
+#define VERSION "version 1.40.2"
 #include "powernow-k8.h"
 
 /* serialize freq changes  */
@@ -50,6 +52,10 @@ static DECLARE_MUTEX(fidvid_sem);
 
 static struct powernow_k8_data *powernow_data[NR_CPUS];
 
+#ifndef CONFIG_SMP
+static cpumask_t cpu_core_map[1];
+#endif
+
 /* Return a frequency in MHz, given an input fid */
 static u32 find_freq_from_fid(u32 fid)
 {
@@ -274,11 +280,18 @@ static int core_voltage_pre_transition(struct powernow_k8_data *data, u32 reqvid
 {
 	u32 rvosteps = data->rvo;
 	u32 savefid = data->currfid;
+	u32 maxvid, lo;
 
 	dprintk("ph1 (cpu%d): start, currfid 0x%x, currvid 0x%x, reqvid 0x%x, rvo 0x%x\n",
 		smp_processor_id(),
 		data->currfid, data->currvid, reqvid, data->rvo);
 
+	rdmsr(MSR_FIDVID_STATUS, lo, maxvid);
+	maxvid = 0x1f & (maxvid >> 16);
+	dprintk("ph1 maxvid=0x%x\n", maxvid);
+	if (reqvid < maxvid) /* lower numbers are higher voltages */
+		reqvid = maxvid;
+
 	while (data->currvid > reqvid) {
 		dprintk("ph1: curr 0x%x, req vid 0x%x\n",
 			data->currvid, reqvid);
@@ -287,7 +300,7 @@ static int core_voltage_pre_transition(struct powernow_k8_data *data, u32 reqvid
 	}
 
 	while ((rvosteps > 0) && ((data->rvo + data->currvid) > reqvid)) {
-		if (data->currvid == 0) {
+		if (data->currvid == maxvid) {
 			rvosteps = 0;
 		} else {
 			dprintk("ph1: changing vid for rvo, req 0x%x\n",
@@ -671,7 +684,7 @@ static int find_psb_table(struct powernow_k8_data *data)
 	 * BIOS and Kernel Developer's Guide, which is available on
 	 * www.amd.com
 	 */
-	printk(KERN_ERR PFX "BIOS error - no PSB\n");
+	printk(KERN_INFO PFX "BIOS error - no PSB or ACPI _PSS objects\n");
 	return -ENODEV;
 }
 
@@ -695,7 +708,7 @@ static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data)
 	struct cpufreq_frequency_table *powernow_table;
 
 	if (acpi_processor_register_performance(&data->acpi_data, data->cpu)) {
-		dprintk("register performance failed\n");
+		dprintk("register performance failed: bad ACPI data\n");
 		return -EIO;
 	}
 
@@ -746,6 +759,7 @@ static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data)
 			continue;
 		}
 
+		/* verify only 1 entry from the lo frequency table */
 		if (fid < HI_FID_TABLE_BOTTOM) {
 			if (cntlofreq) {
 				/* if both entries are the same, ignore this
@@ -816,7 +830,7 @@ static int transition_frequency(struct powernow_k8_data *data, unsigned int inde
 {
 	u32 fid;
 	u32 vid;
-	int res;
+	int res, i;
 	struct cpufreq_freqs freqs;
 
 	dprintk("cpu %d transition to index %u\n", smp_processor_id(), index);
@@ -841,7 +855,8 @@ static int transition_frequency(struct powernow_k8_data *data, unsigned int inde
 	}
 
 	if ((fid < HI_FID_TABLE_BOTTOM) && (data->currfid < HI_FID_TABLE_BOTTOM)) {
-		printk("ignoring illegal change in lo freq table-%x to 0x%x\n",
+		printk(KERN_ERR PFX
+		       "ignoring illegal change in lo freq table-%x to 0x%x\n",
 		       data->currfid, fid);
 		return 1;
 	}
@@ -850,18 +865,20 @@ static int transition_frequency(struct powernow_k8_data *data, unsigned int inde
 		smp_processor_id(), fid, vid);
 
 	freqs.cpu = data->cpu;
-
 	freqs.old = find_khz_freq_from_fid(data->currfid);
 	freqs.new = find_khz_freq_from_fid(fid);
+	for_each_cpu_mask(i, cpu_core_map[data->cpu]) {
+		freqs.cpu = i;
 		cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+	}
 
-	down(&fidvid_sem);
 	res = transition_fid_vid(data, fid, vid);
-	up(&fidvid_sem);
 
 	freqs.new = find_khz_freq_from_fid(data->currfid);
+	for_each_cpu_mask(i, cpu_core_map[data->cpu]) {
+		freqs.cpu = i;
 		cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
-
+        }
 	return res;
 }
 
@@ -874,6 +891,7 @@ static int powernowk8_target(struct cpufreq_policy *pol, unsigned targfreq, unsi
 	u32 checkvid = data->currvid;
 	unsigned int newstate;
 	int ret = -EIO;
+	int i;
 
 	/* only run on specific CPU from here on */
 	oldmask = current->cpus_allowed;
@@ -902,22 +920,41 @@ static int powernowk8_target(struct cpufreq_policy *pol, unsigned targfreq, unsi
 		data->currfid, data->currvid);
 
 	if ((checkvid != data->currvid) || (checkfid != data->currfid)) {
-		printk(KERN_ERR PFX
-		       "error - out of sync, fid 0x%x 0x%x, vid 0x%x 0x%x\n",
+		printk(KERN_INFO PFX
+			"error - out of sync, fix 0x%x 0x%x, vid 0x%x 0x%x\n",
 			checkfid, data->currfid, checkvid, data->currvid);
 	}
 
 	if (cpufreq_frequency_table_target(pol, data->powernow_table, targfreq, relation, &newstate))
 		goto err_out;
 
+	down(&fidvid_sem);
+
+	for_each_cpu_mask(i, cpu_core_map[pol->cpu]) {
+		/* make sure the sibling is initialized */
+		if (!powernow_data[i]) {
+                        ret = 0;
+                        up(&fidvid_sem);
+                        goto err_out;
+                }
+	}
+
 	powernow_k8_acpi_pst_values(data, newstate);
 
 	if (transition_frequency(data, newstate)) {
 		printk(KERN_ERR PFX "transition frequency failed\n");
 		ret = 1;
+		up(&fidvid_sem);
 		goto err_out;
 	}
 
+	/* Update all the fid/vids of our siblings */
+	for_each_cpu_mask(i, cpu_core_map[pol->cpu]) {
+		powernow_data[i]->currvid = data->currvid;
+		powernow_data[i]->currfid = data->currfid;
+	}	
+	up(&fidvid_sem);
+
 	pol->cur = find_khz_freq_from_fid(data->currfid);
 	ret = 0;
 
@@ -962,7 +999,7 @@ static int __init powernowk8_cpu_init(struct cpufreq_policy *pol)
 		 */
 
 		if ((num_online_cpus() != 1) || (num_possible_cpus() != 1)) {
-			printk(KERN_INFO PFX "MP systems not supported by PSB BIOS structure\n");
+			printk(KERN_ERR PFX "MP systems not supported by PSB BIOS structure\n");
 			kfree(data);
 			return -ENODEV;
 		}
@@ -1003,6 +1040,7 @@ static int __init powernowk8_cpu_init(struct cpufreq_policy *pol)
 	schedule();
 
 	pol->governor = CPUFREQ_DEFAULT_GOVERNOR;
+	pol->cpus = cpu_core_map[pol->cpu];
 
 	/* Take a crude guess here. 
 	 * That guess was in microseconds, so multiply with 1000 */
@@ -1127,9 +1165,10 @@ static void __exit powernowk8_exit(void)
 	cpufreq_unregister_driver(&cpufreq_amd64_driver);
 }
 
-MODULE_AUTHOR("Paul Devriendt <paul.devriendt@amd.com>");
+MODULE_AUTHOR("Paul Devriendt <paul.devriendt@amd.com> and Mark Langsdorf <mark.langsdorf@amd.com.");
 MODULE_DESCRIPTION("AMD Athlon 64 and Opteron processor frequency driver.");
 MODULE_LICENSE("GPL");
 
 late_initcall(powernowk8_init);
 module_exit(powernowk8_exit);
+

arch/i386/kernel/cpu/cpufreq/powernow-k8.h

@@ -174,3 +174,18 @@ static int core_voltage_post_transition(struct powernow_k8_data *data, u32 reqvi
 static int core_frequency_transition(struct powernow_k8_data *data, u32 reqfid);
 
 static void powernow_k8_acpi_pst_values(struct powernow_k8_data *data, unsigned int index);
+
+#ifndef for_each_cpu_mask
+#define for_each_cpu_mask(i,mask) for (i=0;i<1;i++)
+#endif
+                                                                                
+#ifdef CONFIG_SMP
+static inline void define_siblings(int cpu, cpumask_t cpu_sharedcore_mask[])
+{
+}
+#else
+static inline void define_siblings(int cpu, cpumask_t cpu_sharedcore_mask[])
+{
+	cpu_set(0, cpu_sharedcore_mask[0]);
+}
+#endif

arch/i386/kernel/cpu/cpufreq/sc520_freq.c

+/*
+ *	sc520_freq.c: cpufreq driver for the AMD Elan sc520
+ *
+ *	Copyright (C) 2005 Sean Young <sean@mess.org>
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ *
+ *	Based on elanfreq.c
+ *
+ *	2005-03-30: - initial revision
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+
+#include <linux/delay.h>
+#include <linux/cpufreq.h>
+
+#include <asm/msr.h>
+#include <asm/timex.h>
+#include <asm/io.h>
+
+#define MMCR_BASE	0xfffef000	/* The default base address */
+#define OFFS_CPUCTL	0x2   /* CPU Control Register */
+
+static __u8 __iomem *cpuctl;
+
+#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "sc520_freq", msg)
+
+static struct cpufreq_frequency_table sc520_freq_table[] = {
+	{0x01,	100000},
+	{0x02,	133000},
+	{0,	CPUFREQ_TABLE_END},
+};
+
+static unsigned int sc520_freq_get_cpu_frequency(unsigned int cpu)
+{
+	u8 clockspeed_reg = *cpuctl;
+
+	switch (clockspeed_reg & 0x03) {
+	default:
+		printk(KERN_ERR "sc520_freq: error: cpuctl register has unexpected value %02x\n", clockspeed_reg);
+	case 0x01:
+		return 100000;
+	case 0x02:
+		return 133000;
+	}
+}
+
+static void sc520_freq_set_cpu_state (unsigned int state)
+{
+
+	struct cpufreq_freqs	freqs;
+	u8 clockspeed_reg;
+
+	freqs.old = sc520_freq_get_cpu_frequency(0);
+	freqs.new = sc520_freq_table[state].frequency;
+	freqs.cpu = 0; /* AMD Elan is UP */
+
+	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+
+	dprintk("attempting to set frequency to %i kHz\n",
+			sc520_freq_table[state].frequency);
+
+	local_irq_disable();
+
+	clockspeed_reg = *cpuctl & ~0x03;
+	*cpuctl = clockspeed_reg | sc520_freq_table[state].index;
+
+	local_irq_enable();
+
+	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+};
+
+static int sc520_freq_verify (struct cpufreq_policy *policy)
+{
+	return cpufreq_frequency_table_verify(policy, &sc520_freq_table[0]);
+}
+
+static int sc520_freq_target (struct cpufreq_policy *policy,
+			    unsigned int target_freq,
+			    unsigned int relation)
+{
+	unsigned int newstate = 0;
+
+	if (cpufreq_frequency_table_target(policy, sc520_freq_table, target_freq, relation, &newstate))
+		return -EINVAL;
+
+	sc520_freq_set_cpu_state(newstate);
+
+	return 0;
+}
+
+
+/*
+ *	Module init and exit code
+ */
+
+static int sc520_freq_cpu_init(struct cpufreq_policy *policy)
+{
+	struct cpuinfo_x86 *c = cpu_data;
+	int result;
+
+	/* capability check */
+	if (c->x86_vendor != X86_VENDOR_AMD ||
+	    c->x86 != 4 || c->x86_model != 9)
+		return -ENODEV;
+
+	/* cpuinfo and default policy values */
+	policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
+	policy->cpuinfo.transition_latency = 1000000; /* 1ms */
+	policy->cur = sc520_freq_get_cpu_frequency(0);
+
+	result = cpufreq_frequency_table_cpuinfo(policy, sc520_freq_table);
+	if (result)
+		return (result);
+
+	cpufreq_frequency_table_get_attr(sc520_freq_table, policy->cpu);
+
+	return 0;
+}
+
+
+static int sc520_freq_cpu_exit(struct cpufreq_policy *policy)
+{
+	cpufreq_frequency_table_put_attr(policy->cpu);
+	return 0;
+}
+
+
+static struct freq_attr* sc520_freq_attr[] = {
+	&cpufreq_freq_attr_scaling_available_freqs,
+	NULL,
+};
+
+
+static struct cpufreq_driver sc520_freq_driver = {
+	.get	= sc520_freq_get_cpu_frequency,
+	.verify	= sc520_freq_verify,
+	.target	= sc520_freq_target,
+	.init	= sc520_freq_cpu_init,
+	.exit	= sc520_freq_cpu_exit,
+	.name	= "sc520_freq",
+	.owner	= THIS_MODULE,
+	.attr	= sc520_freq_attr,
+};
+
+
+static int __init sc520_freq_init(void)
+{
+	struct cpuinfo_x86 *c = cpu_data;
+
+	/* Test if we have the right hardware */
+	if(c->x86_vendor != X86_VENDOR_AMD ||
+				c->x86 != 4 || c->x86_model != 9) {
+		dprintk("no Elan SC520 processor found!\n");
+		return -ENODEV;
+	}
+	cpuctl = ioremap((unsigned long)(MMCR_BASE + OFFS_CPUCTL), 1);
+	if(!cpuctl) {
+		printk(KERN_ERR "sc520_freq: error: failed to remap memory\n");
+		return -ENOMEM;
+	}
+
+	return cpufreq_register_driver(&sc520_freq_driver);
+}
+
+
+static void __exit sc520_freq_exit(void)
+{
+	cpufreq_unregister_driver(&sc520_freq_driver);
+	iounmap(cpuctl);
+}
+
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Sean Young <sean@mess.org>");
+MODULE_DESCRIPTION("cpufreq driver for AMD's Elan sc520 CPU");
+
+module_init(sc520_freq_init);
+module_exit(sc520_freq_exit);
+

arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c

@@ -54,6 +54,8 @@ enum {
 	CPU_DOTHAN_A1,
 	CPU_DOTHAN_A2,
 	CPU_DOTHAN_B0,
+	CPU_MP4HT_D0,
+	CPU_MP4HT_E0,
 };
 
 static const struct cpu_id cpu_ids[] = {
@@ -61,6 +63,8 @@ static const struct cpu_id cpu_ids[] = {
 	[CPU_DOTHAN_A1]	= { 6, 13, 1 },
 	[CPU_DOTHAN_A2]	= { 6, 13, 2 },
 	[CPU_DOTHAN_B0]	= { 6, 13, 6 },
+	[CPU_MP4HT_D0]	= {15,  3, 4 },
+	[CPU_MP4HT_E0]	= {15,  4, 1 },
 };
 #define N_IDS	(sizeof(cpu_ids)/sizeof(cpu_ids[0]))
 
@@ -226,6 +230,8 @@ static struct cpu_model models[] =
 	{ &cpu_ids[CPU_DOTHAN_A1], NULL, 0, NULL },
 	{ &cpu_ids[CPU_DOTHAN_A2], NULL, 0, NULL },
 	{ &cpu_ids[CPU_DOTHAN_B0], NULL, 0, NULL },
+	{ &cpu_ids[CPU_MP4HT_D0], NULL, 0, NULL },
+	{ &cpu_ids[CPU_MP4HT_E0], NULL, 0, NULL },
 
 	{ NULL, }
 };

arch/i386/kernel/cpu/cpufreq/speedstep-lib.c

@@ -336,7 +336,7 @@ unsigned int speedstep_get_freqs(unsigned int processor,
 	if (!prev_speed)
 		return -EIO;
 
-	dprintk("previous seped is %u\n", prev_speed);
+	dprintk("previous speed is %u\n", prev_speed);
 	
 	local_irq_save(flags);
 
@@ -348,7 +348,7 @@ unsigned int speedstep_get_freqs(unsigned int processor,
 		goto out;
 	}
 
-	dprintk("low seped is %u\n", *low_speed);
+	dprintk("low speed is %u\n", *low_speed);
 
 	/* switch to high state */
 	set_state(SPEEDSTEP_HIGH);
@@ -358,7 +358,7 @@ unsigned int speedstep_get_freqs(unsigned int processor,
 		goto out;
 	}
 
-	dprintk("high seped is %u\n", *high_speed);
+	dprintk("high speed is %u\n", *high_speed);
 
 	if (*low_speed == *high_speed) {
 		ret = -ENODEV;

arch/i386/kernel/cpu/cpufreq/speedstep-smi.c

@@ -357,6 +357,9 @@ static int __init speedstep_init(void)
 	case SPEEDSTEP_PROCESSOR_PIII_C:
 	case SPEEDSTEP_PROCESSOR_PIII_C_EARLY:
 		break;
+	case SPEEDSTEP_PROCESSOR_P4M:
+		printk(KERN_INFO "speedstep-smi: you're trying to use this cpufreq driver on a Pentium 4-based CPU. Most likely it will not work.\n");
+		break;
 	default:
 		speedstep_processor = 0;
 	}

arch/i386/kernel/setup.c

@@ -1502,11 +1502,13 @@ void __init setup_arch(char **cmdline_p)
 	if (efi_enabled)
 		efi_map_memmap();
 
+#ifdef CONFIG_ACPI_BOOT
 	/*
 	 * Parse the ACPI tables for possible boot-time SMP configuration.
 	 */
 	acpi_boot_table_init();
 	acpi_boot_init();
+#endif
 
 #ifdef CONFIG_X86_LOCAL_APIC
 	if (smp_found_config)

arch/i386/kernel/timers/common.c

@@ -6,6 +6,7 @@
 #include <linux/timex.h>
 #include <linux/errno.h>
 #include <linux/jiffies.h>
+#include <linux/module.h>
 
 #include <asm/io.h>
 #include <asm/timer.h>
@@ -24,7 +25,7 @@
 
 #define CALIBRATE_TIME	(5 * 1000020/HZ)
 
-unsigned long __init calibrate_tsc(void)
+unsigned long calibrate_tsc(void)
 {
 	mach_prepare_counter();
 
@@ -139,7 +140,7 @@ bad_calibration:
 #endif
 
 /* calculate cpu_khz */
-void __init init_cpu_khz(void)
+void init_cpu_khz(void)
 {
 	if (cpu_has_tsc) {
 		unsigned long tsc_quotient = calibrate_tsc();
@@ -158,3 +159,4 @@ void __init init_cpu_khz(void)
 		}
 	}
 }
+

arch/i386/kernel/timers/timer_tsc.c

@@ -320,6 +320,26 @@ core_initcall(cpufreq_tsc);
 static inline void cpufreq_delayed_get(void) { return; }
 #endif 
 
+int recalibrate_cpu_khz(void)
+{
+#ifndef CONFIG_SMP
+	unsigned long cpu_khz_old = cpu_khz;
+
+	if (cpu_has_tsc) {
+		init_cpu_khz();
+		cpu_data[0].loops_per_jiffy =
+		    cpufreq_scale(cpu_data[0].loops_per_jiffy,
+			          cpu_khz_old,
+				  cpu_khz);
+		return 0;
+	} else
+		return -ENODEV;
+#else
+	return -ENODEV;
+#endif
+}
+EXPORT_SYMBOL(recalibrate_cpu_khz);
+
 static void mark_offset_tsc(void)
 {
 	unsigned long lost,delay;

arch/ppc/syslib/prom_init.c

@@ -626,8 +626,18 @@ inspect_node(phandle node, struct device_node *dad,
 	l = call_prom("package-to-path", 3, 1, node,
 		      mem_start, mem_end - mem_start);
 	if (l >= 0) {
+		char *p, *ep;
+
 		np->full_name = PTRUNRELOC((char *) mem_start);
 		*(char *)(mem_start + l) = 0;
+		/* Fixup an Apple bug where they have bogus \0 chars in the
+		 * middle of the path in some properties
+		 */
+		for (p = (char *)mem_start, ep = p + l; p < ep; p++)
+			if ((*p) == '\0') {
+				memmove(p, p+1, ep - p);
+				ep--;
+			}
 		mem_start = ALIGNUL(mem_start + l + 1);
 	}
 

arch/ppc64/kernel/pSeries_reconfig.c

@@ -47,14 +47,6 @@ static void remove_node_proc_entries(struct device_node *np)
 		remove_proc_entry(pp->name, np->pde);
 		pp = pp->next;
 	}
-
-	/* Assuming that symlinks have the same parent directory as
-	 * np->pde.
-	 */
-	if (np->name_link)
-		remove_proc_entry(np->name_link->name, parent->pde);
-	if (np->addr_link)
-		remove_proc_entry(np->addr_link->name, parent->pde);
 	if (np->pde)
 		remove_proc_entry(np->pde->name, parent->pde);
 }

arch/ppc64/kernel/prom_init.c

@@ -1566,7 +1566,7 @@ static void __init scan_dt_build_struct(phandle node, unsigned long *mem_start,
 {
 	int l, align;
 	phandle child;
-	char *namep, *prev_name, *sstart;
+	char *namep, *prev_name, *sstart, *p, *ep;
 	unsigned long soff;
 	unsigned char *valp;
 	unsigned long offset = reloc_offset();
@@ -1588,6 +1588,14 @@ static void __init scan_dt_build_struct(phandle node, unsigned long *mem_start,
 			call_prom("package-to-path", 3, 1, node, namep, l);
 		}
 		namep[l] = '\0';
+		/* Fixup an Apple bug where they have bogus \0 chars in the
+		 * middle of the path in some properties
+		 */
+		for (p = namep, ep = namep + l; p < ep; p++)
+			if (*p == '\0') {
+				memmove(p, p+1, ep - p);
+				ep--; l--;
+			}
 		*mem_start = _ALIGN(((unsigned long) namep) + strlen(namep) + 1, 4);
 	}
 

arch/ppc64/kernel/time.c

@@ -325,9 +325,7 @@ int timer_interrupt(struct pt_regs * regs)
 
 	irq_enter();
 
-#ifndef CONFIG_PPC_ISERIES
 	profile_tick(CPU_PROFILING, regs);
-#endif
 
 	lpaca->lppaca.int_dword.fields.decr_int = 0;
 

arch/x86_64/Kconfig

@@ -305,6 +305,7 @@ config HPET_TIMER
 
 config X86_PM_TIMER
 	bool "PM timer"
+	depends on ACPI
 	default y
 	help
 	  Support the ACPI PM timer for time keeping. This is slow,

arch/x86_64/kernel/io_apic.c

@@ -37,6 +37,7 @@
 #include <asm/desc.h>
 #include <asm/proto.h>
 #include <asm/mach_apic.h>
+#include <asm/acpi.h>
 
 #define __apicdebuginit  __init
 

arch/x86_64/kernel/mpparse.c

@@ -30,6 +30,7 @@
 #include <asm/pgalloc.h>
 #include <asm/io_apic.h>
 #include <asm/proto.h>
+#include <asm/acpi.h>
 
 /* Have we found an MP table */
 int smp_found_config;

arch/x86_64/kernel/time.c

@@ -27,7 +27,9 @@
 #include <linux/bcd.h>
 #include <linux/kallsyms.h>
 #include <linux/acpi.h>
+#ifdef CONFIG_ACPI
 #include <acpi/achware.h>	/* for PM timer frequency */
+#endif
 #include <asm/8253pit.h>
 #include <asm/pgtable.h>
 #include <asm/vsyscall.h>

drivers/cpufreq/Kconfig

@@ -46,6 +46,10 @@ config CPU_FREQ_STAT_DETAILS
          This will show detail CPU frequency translation table in sysfs file
          system
 
+# Note that it is not currently possible to set the other governors (such as ondemand)
+# as the default, since if they fail to initialise, cpufreq will be
+# left in an undefined state.
+
 choice
 	prompt "Default CPUFreq governor"
 	default CPU_FREQ_DEFAULT_GOV_USERSPACE if CPU_FREQ_SA1100 || CPU_FREQ_SA1110
@@ -115,4 +119,24 @@ config CPU_FREQ_GOV_ONDEMAND
 
 	  If in doubt, say N.
 
+config CPU_FREQ_GOV_CONSERVATIVE
+	tristate "'conservative' cpufreq governor"
+	depends on CPU_FREQ
+	help
+	  'conservative' - this driver is rather similar to the 'ondemand'
+	  governor both in its source code and its purpose, the difference is
+	  its optimisation for better suitability in a battery powered
+	  environment.  The frequency is gracefully increased and decreased
+	  rather than jumping to 100% when speed is required.
+
+	  If you have a desktop machine then you should really be considering
+	  the 'ondemand' governor instead, however if you are using a laptop,
+	  PDA or even an AMD64 based computer (due to the unacceptable
+	  step-by-step latency issues between the minimum and maximum frequency
+	  transitions in the CPU) you will probably want to use this governor.
+
+	  For details, take a look at linux/Documentation/cpu-freq.
+
+	  If in doubt, say N.
+
 endif	# CPU_FREQ

drivers/cpufreq/Makefile

@@ -8,6 +8,7 @@ obj-$(CONFIG_CPU_FREQ_GOV_PERFORMANCE)	+= cpufreq_performance.o
 obj-$(CONFIG_CPU_FREQ_GOV_POWERSAVE)	+= cpufreq_powersave.o
 obj-$(CONFIG_CPU_FREQ_GOV_USERSPACE)	+= cpufreq_userspace.o
 obj-$(CONFIG_CPU_FREQ_GOV_ONDEMAND)	+= cpufreq_ondemand.o
+obj-$(CONFIG_CPU_FREQ_GOV_CONSERVATIVE)	+= cpufreq_conservative.o
 
 # CPUfreq cross-arch helpers
 obj-$(CONFIG_CPU_FREQ_TABLE)		+= freq_table.o

drivers/cpufreq/cpufreq.c

@@ -258,7 +258,7 @@ void cpufreq_notify_transition(struct cpufreq_freqs *freqs, unsigned int state)
 			    (likely(cpufreq_cpu_data[freqs->cpu]->cur)) &&
 			    (unlikely(freqs->old != cpufreq_cpu_data[freqs->cpu]->cur)))
 			{
-				printk(KERN_WARNING "Warning: CPU frequency is %u, "
+				dprintk(KERN_WARNING "Warning: CPU frequency is %u, "
 				       "cpufreq assumed %u kHz.\n", freqs->old, cpufreq_cpu_data[freqs->cpu]->cur);
 				freqs->old = cpufreq_cpu_data[freqs->cpu]->cur;
 			}
@@ -814,7 +814,7 @@ static void cpufreq_out_of_sync(unsigned int cpu, unsigned int old_freq, unsigne
 {
 	struct cpufreq_freqs freqs;
 
-	printk(KERN_WARNING "Warning: CPU frequency out of sync: cpufreq and timing "
+	dprintk(KERN_WARNING "Warning: CPU frequency out of sync: cpufreq and timing "
 	       "core thinks of %u, is %u kHz.\n", old_freq, new_freq);
 
 	freqs.cpu = cpu;
@@ -923,7 +923,7 @@ static int cpufreq_suspend(struct sys_device * sysdev, u32 state)
 		struct cpufreq_freqs freqs;
 
 		if (!(cpufreq_driver->flags & CPUFREQ_PM_NO_WARN))
-			printk(KERN_DEBUG "Warning: CPU frequency is %u, "
+			dprintk(KERN_DEBUG "Warning: CPU frequency is %u, "
 			       "cpufreq assumed %u kHz.\n",
 			       cur_freq, cpu_policy->cur);
 
@@ -1004,7 +1004,7 @@ static int cpufreq_resume(struct sys_device * sysdev)
 			struct cpufreq_freqs freqs;
 
 			if (!(cpufreq_driver->flags & CPUFREQ_PM_NO_WARN))
-				printk(KERN_WARNING "Warning: CPU frequency"
+				dprintk(KERN_WARNING "Warning: CPU frequency"
 				       "is %u, cpufreq assumed %u kHz.\n",
 				       cur_freq, cpu_policy->cur);
 

drivers/cpufreq/cpufreq_stats.c

@@ -19,6 +19,7 @@
 #include <linux/percpu.h>
 #include <linux/kobject.h>
 #include <linux/spinlock.h>
+#include <asm/cputime.h>
 
 static spinlock_t cpufreq_stats_lock;
 
@@ -29,12 +30,6 @@ static struct freq_attr _attr_##_name = {\
 	.show = _show,\
 };
 
-static unsigned long
-delta_time(unsigned long old, unsigned long new)
-{
-	return (old > new) ? (old - new): (new + ~old + 1);
-}
-
 struct cpufreq_stats {
 	unsigned int cpu;
 	unsigned int total_trans;
@@ -42,7 +37,7 @@ struct cpufreq_stats {
 	unsigned int max_state;
 	unsigned int state_num;
 	unsigned int last_index;
-	unsigned long long *time_in_state;
+	cputime64_t *time_in_state;
 	unsigned int *freq_table;
 #ifdef CONFIG_CPU_FREQ_STAT_DETAILS
 	unsigned int *trans_table;
@@ -60,12 +55,16 @@ static int
 cpufreq_stats_update (unsigned int cpu)
 {
 	struct cpufreq_stats *stat;
+	unsigned long long cur_time;
+
+	cur_time = get_jiffies_64();
 	spin_lock(&cpufreq_stats_lock);
 	stat = cpufreq_stats_table[cpu];
 	if (stat->time_in_state)
-		stat->time_in_state[stat->last_index] +=
-			delta_time(stat->last_time, jiffies);
-	stat->last_time = jiffies;
+		stat->time_in_state[stat->last_index] =
+			cputime64_add(stat->time_in_state[stat->last_index],
+				      cputime_sub(cur_time, stat->last_time));
+	stat->last_time = cur_time;
 	spin_unlock(&cpufreq_stats_lock);
 	return 0;
 }
@@ -90,8 +89,8 @@ show_time_in_state(struct cpufreq_policy *policy, char *buf)
 		return 0;
 	cpufreq_stats_update(stat->cpu);
 	for (i = 0; i < stat->state_num; i++) {
-		len += sprintf(buf + len, "%u %llu\n",
-			stat->freq_table[i], stat->time_in_state[i]);
+		len += sprintf(buf + len, "%u %llu\n", stat->freq_table[i], 
+			(unsigned long long)cputime64_to_clock_t(stat->time_in_state[i]));
 	}
 	return len;
 }
@@ -107,16 +106,30 @@ show_trans_table(struct cpufreq_policy *policy, char *buf)
 	if(!stat)
 		return 0;
 	cpufreq_stats_update(stat->cpu);
+	len += snprintf(buf + len, PAGE_SIZE - len, "   From  :    To\n");
+	len += snprintf(buf + len, PAGE_SIZE - len, "         : ");
 	for (i = 0; i < stat->state_num; i++) {
 		if (len >= PAGE_SIZE)
 			break;
-		len += snprintf(buf + len, PAGE_SIZE - len, "%9u:\t",
+		len += snprintf(buf + len, PAGE_SIZE - len, "%9u ",
+				stat->freq_table[i]);
+	}
+	if (len >= PAGE_SIZE)
+		return len;
+
+	len += snprintf(buf + len, PAGE_SIZE - len, "\n");
+
+	for (i = 0; i < stat->state_num; i++) {
+		if (len >= PAGE_SIZE)
+			break;
+
+		len += snprintf(buf + len, PAGE_SIZE - len, "%9u: ",
 				stat->freq_table[i]);
 
 		for (j = 0; j < stat->state_num; j++)   {
 			if (len >= PAGE_SIZE)
 				break;
-			len += snprintf(buf + len, PAGE_SIZE - len, "%u\t",
+			len += snprintf(buf + len, PAGE_SIZE - len, "%9u ",
 					stat->trans_table[i*stat->max_state+j]);
 		}
 		len += snprintf(buf + len, PAGE_SIZE - len, "\n");
@@ -197,7 +210,7 @@ cpufreq_stats_create_table (struct cpufreq_policy *policy,
 		count++;
 	}
 
-	alloc_size = count * sizeof(int) + count * sizeof(long long);
+	alloc_size = count * sizeof(int) + count * sizeof(cputime64_t);
 
 #ifdef CONFIG_CPU_FREQ_STAT_DETAILS
 	alloc_size += count * count * sizeof(int);
@@ -224,7 +237,7 @@ cpufreq_stats_create_table (struct cpufreq_policy *policy,
 	}
 	stat->state_num = j;
 	spin_lock(&cpufreq_stats_lock);
-	stat->last_time = jiffies;
+	stat->last_time = get_jiffies_64();
 	stat->last_index = freq_table_get_index(stat, policy->cur);
 	spin_unlock(&cpufreq_stats_lock);
 	cpufreq_cpu_put(data);

drivers/firmware/pcdp.c

@@ -11,6 +11,7 @@
  * published by the Free Software Foundation.
  */
 
+#include <linux/config.h>
 #include <linux/acpi.h>
 #include <linux/console.h>
 #include <linux/efi.h>

drivers/i2c/busses/i2c-ali1563.c

@@ -2,6 +2,7 @@
  *	i2c-ali1563.c - i2c driver for the ALi 1563 Southbridge
  *
  *	Copyright (C) 2004 Patrick Mochel
+ *		      2005 Rudolf Marek <r.marek@sh.cvut.cz>
  *
  *	The 1563 southbridge is deceptively similar to the 1533, with a
  *	few notable exceptions. One of those happens to be the fact they
@@ -57,10 +58,11 @@
 #define HST_CNTL2_BLOCK		0x05
 
 
+#define HST_CNTL2_SIZEMASK	0x38
 
 static unsigned short ali1563_smba;
 
-static int ali1563_transaction(struct i2c_adapter * a)
+static int ali1563_transaction(struct i2c_adapter * a, int size)
 {
 	u32 data;
 	int timeout;
@@ -73,7 +75,7 @@ static int ali1563_transaction(struct i2c_adapter * a)
 
 	data = inb_p(SMB_HST_STS);
 	if (data & HST_STS_BAD) {
-		dev_warn(&a->dev,"ali1563: Trying to reset busy device\n");
+		dev_err(&a->dev, "ali1563: Trying to reset busy device\n");
 		outb_p(data | HST_STS_BAD,SMB_HST_STS);
 		data = inb_p(SMB_HST_STS);
 		if (data & HST_STS_BAD)
@@ -94,19 +96,31 @@ static int ali1563_transaction(struct i2c_adapter * a)
 
 	if (timeout && !(data & HST_STS_BAD))
 		return 0;
-	dev_warn(&a->dev, "SMBus Error: %s%s%s%s%s\n",
-		timeout ? "Timeout " : "",
-		data & HST_STS_FAIL ? "Transaction Failed " : "",
-		data & HST_STS_BUSERR ? "No response or Bus Collision " : "",
-		data & HST_STS_DEVERR ? "Device Error " : "",
-		!(data & HST_STS_DONE) ? "Transaction Never Finished " : "");
 
-	if (!(data & HST_STS_DONE))
+	if (!timeout) {
+		dev_err(&a->dev, "Timeout - Trying to KILL transaction!\n");
 		/* Issue 'kill' to host controller */
 		outb_p(HST_CNTL2_KILL,SMB_HST_CNTL2);
-	else
-		/* Issue timeout to reset all devices on bus */
+		data = inb_p(SMB_HST_STS);
+ 	}
+
+	/* device error - no response, ignore the autodetection case */
+	if ((data & HST_STS_DEVERR) && (size != HST_CNTL2_QUICK)) {
+		dev_err(&a->dev, "Device error!\n");
+	}
+
+	/* bus collision */
+	if (data & HST_STS_BUSERR) {
+		dev_err(&a->dev, "Bus collision!\n");
+		/* Issue timeout, hoping it helps */
 		outb_p(HST_CNTL1_TIMEOUT,SMB_HST_CNTL1);
+	}
+
+	if (data & HST_STS_FAIL) {
+		dev_err(&a->dev, "Cleaning fail after KILL!\n");
+		outb_p(0x0,SMB_HST_CNTL2);
+	}
+
 	return -1;
 }
 
@@ -149,7 +163,7 @@ static int ali1563_block_start(struct i2c_adapter * a)
 
 	if (timeout && !(data & HST_STS_BAD))
 		return 0;
-	dev_warn(&a->dev, "SMBus Error: %s%s%s%s%s\n",
+	dev_err(&a->dev, "SMBus Error: %s%s%s%s%s\n",
 		timeout ? "Timeout " : "",
 		data & HST_STS_FAIL ? "Transaction Failed " : "",
 		data & HST_STS_BUSERR ? "No response or Bus Collision " : "",
@@ -242,13 +256,15 @@ static s32 ali1563_access(struct i2c_adapter * a, u16 addr,
 	}
 
 	outb_p(((addr & 0x7f) << 1) | (rw & 0x01), SMB_HST_ADD);
-	outb_p(inb_p(SMB_HST_CNTL2) | (size << 3), SMB_HST_CNTL2);
+	outb_p((inb_p(SMB_HST_CNTL2) & ~HST_CNTL2_SIZEMASK) | (size << 3), SMB_HST_CNTL2);
 
 	/* Write the command register */
+
 	switch(size) {
 	case HST_CNTL2_BYTE:
 		if (rw== I2C_SMBUS_WRITE)
-			outb_p(cmd, SMB_HST_CMD);
+			/* Beware it uses DAT0 register and not CMD! */
+			outb_p(cmd, SMB_HST_DAT0);
 		break;
 	case HST_CNTL2_BYTE_DATA:
 		outb_p(cmd, SMB_HST_CMD);
@@ -268,7 +284,7 @@ static s32 ali1563_access(struct i2c_adapter * a, u16 addr,
 		goto Done;
 	}
 
-	if ((error = ali1563_transaction(a)))
+	if ((error = ali1563_transaction(a, size)))
 		goto Done;
 
 	if ((rw == I2C_SMBUS_WRITE) || (size == HST_CNTL2_QUICK))

drivers/ide/pci/amd74xx.c

@@ -72,6 +72,7 @@ static struct amd_ide_chip {
 	{ PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA2,	0x50, AMD_UDMA_133 },
 	{ PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_IDE,	0x50, AMD_UDMA_133 },
 	{ PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_IDE,	0x50, AMD_UDMA_133 },
+	{ PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_IDE,	0x50, AMD_UDMA_133 },
 	{ 0 }
 };
 
@@ -487,6 +488,7 @@ static ide_pci_device_t amd74xx_chipsets[] __devinitdata = {
 	/* 12 */ DECLARE_NV_DEV("NFORCE3-250-SATA2"),
 	/* 13 */ DECLARE_NV_DEV("NFORCE-CK804"),
 	/* 14 */ DECLARE_NV_DEV("NFORCE-MCP04"),
+	/* 15 */ DECLARE_NV_DEV("NFORCE-MCP51"),
 };
 
 static int __devinit amd74xx_probe(struct pci_dev *dev, const struct pci_device_id *id)
@@ -521,6 +523,7 @@ static struct pci_device_id amd74xx_pci_tbl[] = {
 #endif
 	{ PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_IDE,	PCI_ANY_ID, PCI_ANY_ID, 0, 0, 13 },
 	{ PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_IDE,	PCI_ANY_ID, PCI_ANY_ID, 0, 0, 14 },
+	{ PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_IDE,	PCI_ANY_ID, PCI_ANY_ID, 0, 0, 15 },
 	{ 0, },
 };
 MODULE_DEVICE_TABLE(pci, amd74xx_pci_tbl);

drivers/pci/hotplug/cpci_hotplug_pci.c

 /*
  * CompactPCI Hot Plug Driver PCI functions
  *
- * Copyright (C) 2002 by SOMA Networks, Inc.
+ * Copyright (C) 2002,2005 by SOMA Networks, Inc.
  *
  * All rights reserved.
  *
@@ -38,10 +38,10 @@ extern int cpci_debug;
 
 #define dbg(format, arg...)					\
 	do {							\
-		if(cpci_debug)					\
+		if (cpci_debug)					\
 			printk (KERN_DEBUG "%s: " format "\n",	\
 				MY_NAME , ## arg); 		\
-	} while(0)
+	} while (0)
 #define err(format, arg...) printk(KERN_ERR "%s: " format "\n", MY_NAME , ## arg)
 #define info(format, arg...) printk(KERN_INFO "%s: " format "\n", MY_NAME , ## arg)
 #define warn(format, arg...) printk(KERN_WARNING "%s: " format "\n", MY_NAME , ## arg)
@@ -57,16 +57,15 @@ u8 cpci_get_attention_status(struct slot* slot)
 	hs_cap = pci_bus_find_capability(slot->bus,
 					 slot->devfn,
 					 PCI_CAP_ID_CHSWP);
-	if(!hs_cap) {
+	if (!hs_cap)
 		return 0;
-	}
 
-	if(pci_bus_read_config_word(slot->bus,
+	if (pci_bus_read_config_word(slot->bus,
 				     slot->devfn,
 				     hs_cap + 2,
-				     &hs_csr)) {
+				     &hs_csr))
 		return 0;
-	}
+
 	return hs_csr & 0x0008 ? 1 : 0;
 }
 
@@ -78,27 +77,22 @@ int cpci_set_attention_status(struct slot* slot, int status)
 	hs_cap = pci_bus_find_capability(slot->bus,
 					 slot->devfn,
 					 PCI_CAP_ID_CHSWP);
-	if(!hs_cap) {
+	if (!hs_cap)
 		return 0;
-	}
-
-	if(pci_bus_read_config_word(slot->bus,
+	if (pci_bus_read_config_word(slot->bus,
 				     slot->devfn,
 				     hs_cap + 2,
-				     &hs_csr)) {
+				     &hs_csr))
 		return 0;
-	}
-	if(status) {
+	if (status)
 		hs_csr |= HS_CSR_LOO;
-	} else {
+	else
 		hs_csr &= ~HS_CSR_LOO;
-	}
-	if(pci_bus_write_config_word(slot->bus,
+	if (pci_bus_write_config_word(slot->bus,
 				      slot->devfn,
 				      hs_cap + 2,
-				      hs_csr)) {
+				      hs_csr))
 		return 0;
-	}
 	return 1;
 }
 
@@ -110,16 +104,13 @@ u16 cpci_get_hs_csr(struct slot* slot)
 	hs_cap = pci_bus_find_capability(slot->bus,
 					 slot->devfn,
 					 PCI_CAP_ID_CHSWP);
-	if(!hs_cap) {
+	if (!hs_cap)
 		return 0xFFFF;
-	}
-
-	if(pci_bus_read_config_word(slot->bus,
+	if (pci_bus_read_config_word(slot->bus,
 				     slot->devfn,
 				     hs_cap + 2,
-				     &hs_csr)) {
+				     &hs_csr))
 		return 0xFFFF;
-	}
 	return hs_csr;
 }
 
@@ -132,23 +123,21 @@ int cpci_check_and_clear_ins(struct slot* slot)
 	hs_cap = pci_bus_find_capability(slot->bus,
 					 slot->devfn,
 					 PCI_CAP_ID_CHSWP);
-	if(!hs_cap) {
+	if (!hs_cap)
 		return 0;
-	}
-	if(pci_bus_read_config_word(slot->bus,
+	if (pci_bus_read_config_word(slot->bus,
 				     slot->devfn,
 				     hs_cap + 2,
-				     &hs_csr)) {
+				     &hs_csr))
 		return 0;
-	}
-	if(hs_csr & HS_CSR_INS) {
+	if (hs_csr & HS_CSR_INS) {
 		/* Clear INS (by setting it) */
-		if(pci_bus_write_config_word(slot->bus,
+		if (pci_bus_write_config_word(slot->bus,
 					      slot->devfn,
 					      hs_cap + 2,
-					      hs_csr)) {
+					      hs_csr))
 			ins = 0;
-		}
+		else
 			ins = 1;
 	}
 	return ins;
@@ -163,18 +152,15 @@ int cpci_check_ext(struct slot* slot)
 	hs_cap = pci_bus_find_capability(slot->bus,
 					 slot->devfn,
 					 PCI_CAP_ID_CHSWP);
-	if(!hs_cap) {
+	if (!hs_cap)
 		return 0;
-	}
-	if(pci_bus_read_config_word(slot->bus,
+	if (pci_bus_read_config_word(slot->bus,
 				     slot->devfn,
 				     hs_cap + 2,
-				     &hs_csr)) {
+				     &hs_csr))
 		return 0;
-	}
-	if(hs_csr & HS_CSR_EXT) {
+	if (hs_csr & HS_CSR_EXT)
 		ext = 1;
-	}
 	return ext;
 }
 
@@ -186,24 +172,21 @@ int cpci_clear_ext(struct slot* slot)
 	hs_cap = pci_bus_find_capability(slot->bus,
 					 slot->devfn,
 					 PCI_CAP_ID_CHSWP);
-	if(!hs_cap) {
+	if (!hs_cap)
 		return -ENODEV;
-	}
-	if(pci_bus_read_config_word(slot->bus,
+	if (pci_bus_read_config_word(slot->bus,
 				     slot->devfn,
 				     hs_cap + 2,
-				     &hs_csr)) {
+				     &hs_csr))
 		return -ENODEV;
-	}
-	if(hs_csr & HS_CSR_EXT) {
+	if (hs_csr & HS_CSR_EXT) {
 		/* Clear EXT (by setting it) */
-		if(pci_bus_write_config_word(slot->bus,
+		if (pci_bus_write_config_word(slot->bus,
 					      slot->devfn,
 					      hs_cap + 2,
-					      hs_csr)) {
+					      hs_csr))
 			return -ENODEV;
 	}
-	}
 	return 0;
 }
 
@@ -215,18 +198,16 @@ int cpci_led_on(struct slot* slot)
 	hs_cap = pci_bus_find_capability(slot->bus,
 					 slot->devfn,
 					 PCI_CAP_ID_CHSWP);
-	if(!hs_cap) {
+	if (!hs_cap)
 		return -ENODEV;
-	}
-	if(pci_bus_read_config_word(slot->bus,
+	if (pci_bus_read_config_word(slot->bus,
 				     slot->devfn,
 				     hs_cap + 2,
-				     &hs_csr)) {
+				     &hs_csr))
 		return -ENODEV;
-	}
-	if((hs_csr & HS_CSR_LOO) != HS_CSR_LOO) {
+	if ((hs_csr & HS_CSR_LOO) != HS_CSR_LOO) {
 		hs_csr |= HS_CSR_LOO;
-		if(pci_bus_write_config_word(slot->bus,
+		if (pci_bus_write_config_word(slot->bus,
 					      slot->devfn,
 					      hs_cap + 2,
 					      hs_csr)) {
@@ -246,18 +227,16 @@ int cpci_led_off(struct slot* slot)
 	hs_cap = pci_bus_find_capability(slot->bus,
 					 slot->devfn,
 					 PCI_CAP_ID_CHSWP);
-	if(!hs_cap) {
+	if (!hs_cap)
 		return -ENODEV;
-	}
-	if(pci_bus_read_config_word(slot->bus,
+	if (pci_bus_read_config_word(slot->bus,
 				     slot->devfn,
 				     hs_cap + 2,
-				     &hs_csr)) {
+				     &hs_csr))
 		return -ENODEV;
-	}
-	if(hs_csr & HS_CSR_LOO) {
+	if (hs_csr & HS_CSR_LOO) {
 		hs_csr &= ~HS_CSR_LOO;
-		if(pci_bus_write_config_word(slot->bus,
+		if (pci_bus_write_config_word(slot->bus,
 					      slot->devfn,
 					      hs_cap + 2,
 					      hs_csr)) {
@@ -274,19 +253,6 @@ int cpci_led_off(struct slot* slot)
  * Device configuration functions
  */
 
-static void cpci_enable_device(struct pci_dev *dev)
-{
-	struct pci_bus *bus;
-
-	pci_enable_device(dev);
-	if(dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
-		bus = dev->subordinate;
-		list_for_each_entry(dev, &bus->devices, bus_list) {
-			cpci_enable_device(dev);
-		}
-	}
-}
-
 int cpci_configure_slot(struct slot* slot)
 {
 	unsigned char busnr;
@@ -294,14 +260,14 @@ int cpci_configure_slot(struct slot* slot)
 
 	dbg("%s - enter", __FUNCTION__);
 
-	if(slot->dev == NULL) {
+	if (slot->dev == NULL) {
 		dbg("pci_dev null, finding %02x:%02x:%x",
 		    slot->bus->number, PCI_SLOT(slot->devfn), PCI_FUNC(slot->devfn));
-		slot->dev = pci_find_slot(slot->bus->number, slot->devfn);
+		slot->dev = pci_get_slot(slot->bus, slot->devfn);
 	}
 
 	/* Still NULL? Well then scan for it! */
-	if(slot->dev == NULL) {
+	if (slot->dev == NULL) {
 		int n;
 		dbg("pci_dev still null");
 
@@ -311,10 +277,10 @@ int cpci_configure_slot(struct slot* slot)
 		 */
 		n = pci_scan_slot(slot->bus, slot->devfn);
 		dbg("%s: pci_scan_slot returned %d", __FUNCTION__, n);
-		if(n > 0)
+		if (n > 0)
 			pci_bus_add_devices(slot->bus);
-		slot->dev = pci_find_slot(slot->bus->number, slot->devfn);
-		if(slot->dev == NULL) {
+		slot->dev = pci_get_slot(slot->bus, slot->devfn);
+		if (slot->dev == NULL) {
 			err("Could not find PCI device for slot %02x", slot->number);
 			return 1;
 		}
@@ -329,8 +295,6 @@ int cpci_configure_slot(struct slot* slot)
 
 	pci_bus_assign_resources(slot->dev->bus);
 
-	cpci_enable_device(slot->dev);
-
 	dbg("%s - exit", __FUNCTION__);
 	return 0;
 }
@@ -341,15 +305,15 @@ int cpci_unconfigure_slot(struct slot* slot)
 	struct pci_dev *dev;
 
 	dbg("%s - enter", __FUNCTION__);
-	if(!slot->dev) {
+	if (!slot->dev) {
 		err("No device for slot %02x\n", slot->number);
 		return -ENODEV;
 	}
 
 	for (i = 0; i < 8; i++) {
-		dev = pci_find_slot(slot->bus->number,
+		dev = pci_get_slot(slot->bus,
 				    PCI_DEVFN(PCI_SLOT(slot->devfn), i));
-		if(dev) {
+		if (dev) {
 			pci_remove_bus_device(dev);
 			slot->dev = NULL;
 		}

drivers/pci/hotplug/shpchprm_acpi.c

@@ -1626,7 +1626,7 @@ int shpchprm_set_hpp(
 	pci_bus->number = func->bus;
 	devfn = PCI_DEVFN(func->device, func->function);
 
-	ab = find_acpi_bridge_by_bus(acpi_bridges_head, ctrl->seg, ctrl->bus);
+	ab = find_acpi_bridge_by_bus(acpi_bridges_head, ctrl->seg, ctrl->slot_bus);
 
 	if (ab) {
 		if (ab->_hpp) {
@@ -1681,7 +1681,7 @@ void shpchprm_enable_card(
 		| PCI_COMMAND_IO | PCI_COMMAND_MEMORY;
 	bcmd = bcommand  = bcommand | PCI_BRIDGE_CTL_NO_ISA;
 
-	ab = find_acpi_bridge_by_bus(acpi_bridges_head, ctrl->seg, ctrl->bus);
+	ab = find_acpi_bridge_by_bus(acpi_bridges_head, ctrl->seg, ctrl->slot_bus);
 	if (ab) {
 		if (ab->_hpp) {
 			if (ab->_hpp->enable_perr) {

drivers/usb/host/Kconfig

@@ -124,3 +124,14 @@ config USB_SL811_HCD
 	  To compile this driver as a module, choose M here: the
 	  module will be called sl811-hcd.
 
+config USB_SL811_CS
+	tristate "CF/PCMCIA support for SL811HS HCD"
+	depends on USB_SL811_HCD && PCMCIA
+	default N
+	help
+	  Wraps a PCMCIA driver around the SL811HS HCD, supporting the RATOC
+	  REX-CFU1U CF card (often used with PDAs).  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called "sl811_cs".
+

drivers/usb/host/Makefile

@@ -7,4 +7,5 @@ obj-$(CONFIG_USB_EHCI_HCD)	+= ehci-hcd.o
 obj-$(CONFIG_USB_OHCI_HCD)	+= ohci-hcd.o
 obj-$(CONFIG_USB_UHCI_HCD)	+= uhci-hcd.o
 obj-$(CONFIG_USB_SL811_HCD)	+= sl811-hcd.o
+obj-$(CONFIG_USB_SL811_CS)	+= sl811_cs.o
 obj-$(CONFIG_ETRAX_ARCH_V10)	+= hc_crisv10.o

drivers/usb/host/sl811-hcd.c

@@ -2,7 +2,7 @@
  * SL811HS HCD (Host Controller Driver) for USB.
  *
  * Copyright (C) 2004 Psion Teklogix (for NetBook PRO)
- * Copyright (C) 2004 David Brownell
+ * Copyright (C) 2004-2005 David Brownell
  *
  * Periodic scheduling is based on Roman's OHCI code
  * 	Copyright (C) 1999 Roman Weissgaerber
@@ -67,7 +67,7 @@
 MODULE_DESCRIPTION("SL811HS USB Host Controller Driver");
 MODULE_LICENSE("GPL");
 
-#define DRIVER_VERSION	"15 Dec 2004"
+#define DRIVER_VERSION	"19 May 2005"
 
 
 #ifndef DEBUG
@@ -121,6 +121,10 @@ static void port_power(struct sl811 *sl811, int is_on)
 	/* reset as thoroughly as we can */
 	if (sl811->board && sl811->board->reset)
 		sl811->board->reset(hcd->self.controller);
+	else {
+		sl811_write(sl811, SL11H_CTLREG1, SL11H_CTL1MASK_SE0);
+		mdelay(20);
+	}
 
 	sl811_write(sl811, SL11H_IRQ_ENABLE, 0);
 	sl811_write(sl811, SL11H_CTLREG1, sl811->ctrl1);
@@ -443,6 +447,7 @@ static void finish_request(
 	spin_lock(&urb->lock);
 	if (urb->status == -EINPROGRESS)
 		urb->status = status;
+	urb->hcpriv = NULL;
 	spin_unlock(&urb->lock);
 
 	spin_unlock(&sl811->lock);
@@ -661,9 +666,9 @@ retry:
 
 #ifdef	QUIRK2
 	/* this may no longer be necessary ... */
-	if (irqstat == 0 && ret == IRQ_NONE) {
+	if (irqstat == 0) {
 		irqstat = checkdone(sl811);
-		if (irqstat /* && irq != ~0 */ )
+		if (irqstat)
 			sl811->stat_lost++;
 	}
 #endif
@@ -722,7 +727,8 @@ retry:
 		if (sl811->active_a) {
 			sl811_write(sl811, SL811_EP_A(SL11H_HOSTCTLREG), 0);
 			finish_request(sl811, sl811->active_a,
-				container_of(sl811->active_a->hep->urb_list.next,
+				container_of(sl811->active_a
+						->hep->urb_list.next,
 					struct urb, urb_list),
 				NULL, -ESHUTDOWN);
 			sl811->active_a = NULL;
@@ -731,7 +737,8 @@ retry:
 		if (sl811->active_b) {
 			sl811_write(sl811, SL811_EP_B(SL11H_HOSTCTLREG), 0);
 			finish_request(sl811, sl811->active_b,
-				container_of(sl811->active_b->hep->urb_list.next,
+				container_of(sl811->active_b
+						->hep->urb_list.next,
 					struct urb, urb_list),
 				NULL, -ESHUTDOWN);
 			sl811->active_b = NULL;
@@ -890,6 +897,7 @@ static int sl811h_urb_enqueue(
 			break;
 		}
 
+		ep->hep = hep;
 		hep->hcpriv = ep;
 	}
 
@@ -961,15 +969,16 @@ fail:
 static int sl811h_urb_dequeue(struct usb_hcd *hcd, struct urb *urb)
 {
 	struct sl811		*sl811 = hcd_to_sl811(hcd);
-	struct usb_host_endpoint *hep = urb->hcpriv;
+	struct usb_host_endpoint *hep;
 	unsigned long		flags;
 	struct sl811h_ep	*ep;
 	int			retval = 0;
 
+	spin_lock_irqsave(&sl811->lock, flags);
+	hep = urb->hcpriv;
 	if (!hep)
-		return -EINVAL;
+		goto fail;
 
-	spin_lock_irqsave(&sl811->lock, flags);
 	ep = hep->hcpriv;
 	if (ep) {
 		/* finish right away if this urb can't be active ...
@@ -1017,6 +1026,7 @@ static int sl811h_urb_dequeue(struct usb_hcd *hcd, struct urb *urb)
 			VDBG("dequeue, urb %p active %s; wait4irq\n", urb,
 				(sl811->active_a == ep) ? "A" : "B");
 	} else
+fail:
 		retval = -EINVAL;
 	spin_unlock_irqrestore(&sl811->lock, flags);
 	return retval;
@@ -1576,6 +1586,9 @@ sl811h_start(struct usb_hcd *hcd)
 	if (sl811->board && sl811->board->power)
 		hub_set_power_budget(udev, sl811->board->power * 2);
 
+	/* enable power and interupts */
+	port_power(sl811, 1);
+
 	return 0;
 }
 
@@ -1618,7 +1631,7 @@ static struct hc_driver sl811h_hc_driver = {
 
 /*-------------------------------------------------------------------------*/
 
-static int __init_or_module
+static int __devexit
 sl811h_remove(struct device *dev)
 {
 	struct usb_hcd		*hcd = dev_get_drvdata(dev);
@@ -1631,21 +1644,20 @@ sl811h_remove(struct device *dev)
 	remove_debug_file(sl811);
 	usb_remove_hcd(hcd);
 
-	iounmap(sl811->data_reg);
+	/* some platforms may use IORESOURCE_IO */
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-	release_mem_region(res->start, 1);
+	if (res)
+		iounmap(sl811->data_reg);
 
-	iounmap(sl811->addr_reg);
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	release_mem_region(res->start, 1);
+	if (res)
+		iounmap(sl811->addr_reg);
 
 	usb_put_hcd(hcd);
 	return 0;
 }
 
-#define resource_len(r) (((r)->end - (r)->start) + 1)
-
-static int __init
+static int __devinit
 sl811h_probe(struct device *dev)
 {
 	struct usb_hcd		*hcd;
@@ -1656,7 +1668,7 @@ sl811h_probe(struct device *dev)
 	void __iomem		*addr_reg;
 	void __iomem		*data_reg;
 	int			retval;
-	u8			tmp;
+	u8			tmp, ioaddr = 0;
 
 	/* basic sanity checks first.  board-specific init logic should
 	 * have initialized these three resources and probably board
@@ -1664,13 +1676,8 @@ sl811h_probe(struct device *dev)
 	 * minimal sanity checking.
 	 */
 	pdev = container_of(dev, struct platform_device, dev);
-	if (pdev->num_resources < 3)
-		return -ENODEV;
-
-	addr = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	data = platform_get_resource(pdev, IORESOURCE_MEM, 1);
 	irq = platform_get_irq(pdev, 0);
-	if (!addr || !data || irq < 0)
+	if (pdev->num_resources < 3 || irq < 0)
 		return -ENODEV;
 
 	/* refuse to confuse usbcore */
@@ -1679,25 +1686,32 @@ sl811h_probe(struct device *dev)
 		return -EINVAL;
 	}
 
-	if (!request_mem_region(addr->start, 1, hcd_name)) {
+	/* the chip may be wired for either kind of addressing */
+	addr = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	data = platform_get_resource(pdev, IORESOURCE_MEM, 1);
 	retval = -EBUSY;
-		goto err1;
-	}
-	addr_reg = ioremap(addr->start, resource_len(addr));
+	if (!addr || !data) {
+		addr = platform_get_resource(pdev, IORESOURCE_IO, 0);
+		data = platform_get_resource(pdev, IORESOURCE_IO, 1);
+		if (!addr || !data)
+			return -ENODEV;
+		ioaddr = 1;
+
+		addr_reg = (void __iomem *) addr->start;
+		data_reg = (void __iomem *) data->start;
+	} else {
+		addr_reg = ioremap(addr->start, 1);
 		if (addr_reg == NULL) {
 			retval = -ENOMEM;
 			goto err2;
 		}
 
-	if (!request_mem_region(data->start, 1, hcd_name)) {
-		retval = -EBUSY;
-		goto err3;
-	}
-	data_reg = ioremap(data->start, resource_len(addr));
+		data_reg = ioremap(data->start, 1);
 		if (data_reg == NULL) {
 			retval = -ENOMEM;
 			goto err4;
 		}
+	}
 
 	/* allocate and initialize hcd */
 	hcd = usb_create_hcd(&sl811h_hc_driver, dev, dev->bus_id);
@@ -1737,12 +1751,14 @@ sl811h_probe(struct device *dev)
 		goto err6;
 	}
 
-	/* sl811s would need a different handler for this irq */
-#ifdef	CONFIG_ARM
-	/* Cypress docs say the IRQ is IRQT_HIGH ... */
-	set_irq_type(irq, IRQT_RISING);
-#endif
-	retval = usb_add_hcd(hcd, irq, SA_INTERRUPT);
+	/* The chip's IRQ is level triggered, active high.  A requirement
+	 * for platform device setup is to cope with things like signal
+	 * inverters (e.g. CF is active low) or working only with edge
+	 * triggers (e.g. most ARM CPUs).  Initial driver stress testing
+	 * was on a system with single edge triggering, so most sorts of
+	 * triggering arrangement should work.
+	 */
+	retval = usb_add_hcd(hcd, irq, SA_INTERRUPT | SA_SHIRQ);
 	if (retval != 0)
 		goto err6;
 
@@ -1752,14 +1768,12 @@ sl811h_probe(struct device *dev)
  err6:
 	usb_put_hcd(hcd);
  err5:
+	if (!ioaddr)
 		iounmap(data_reg);
  err4:
-	release_mem_region(data->start, 1);
- err3:
+	if (!ioaddr)
 		iounmap(addr_reg);
  err2:
-	release_mem_region(addr->start, 1);
- err1:
 	DBG("init error, %d\n", retval);
 	return retval;
 }
@@ -1821,16 +1835,18 @@ sl811h_resume(struct device *dev, u32 phase)
 #endif
 
 
-static struct device_driver sl811h_driver = {
+/* this driver is exported so sl811_cs can depend on it */
+struct device_driver sl811h_driver = {
 	.name =		(char *) hcd_name,
 	.bus =		&platform_bus_type,
 
 	.probe =	sl811h_probe,
-	.remove =	sl811h_remove,
+	.remove =	__devexit_p(sl811h_remove),
 
 	.suspend =	sl811h_suspend,
 	.resume =	sl811h_resume,
 };
+EXPORT_SYMBOL(sl811h_driver);
 
 /*-------------------------------------------------------------------------*/
 

drivers/usb/serial/ftdi_sio.c

@@ -364,6 +364,7 @@ static struct usb_device_id id_table_8U232AM [] = {
 	{ USB_DEVICE_VER(FTDI_VID, PROTEGO_SPECIAL_3, 0, 0x3ff) },
 	{ USB_DEVICE_VER(FTDI_VID, PROTEGO_SPECIAL_4, 0, 0x3ff) },
 	{ USB_DEVICE_VER(FTDI_VID, FTDI_ELV_UO100_PID, 0, 0x3ff) },
+	{ USB_DEVICE_VER(FTDI_VID, FTDI_ELV_UM100_PID, 0, 0x3ff) },
 	{ USB_DEVICE_VER(FTDI_VID, INSIDE_ACCESSO, 0, 0x3ff) },
 	{ USB_DEVICE_VER(INTREPID_VID, INTREPID_VALUECAN_PID, 0, 0x3ff) },
 	{ USB_DEVICE_VER(INTREPID_VID, INTREPID_NEOVI_PID, 0, 0x3ff) },
@@ -475,6 +476,7 @@ static struct usb_device_id id_table_FT232BM [] = {
 	{ USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E88E_PID, 0x400, 0xffff) },
 	{ USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E88F_PID, 0x400, 0xffff) },
 	{ USB_DEVICE_VER(FTDI_VID, FTDI_ELV_UO100_PID, 0x400, 0xffff) },
+	{ USB_DEVICE_VER(FTDI_VID, FTDI_ELV_UM100_PID, 0x400, 0xffff) },
  	{ USB_DEVICE_VER(FTDI_VID, LINX_SDMUSBQSS_PID, 0x400, 0xffff) },
  	{ USB_DEVICE_VER(FTDI_VID, LINX_MASTERDEVEL2_PID, 0x400, 0xffff) },
  	{ USB_DEVICE_VER(FTDI_VID, LINX_FUTURE_0_PID, 0x400, 0xffff) },
@@ -618,6 +620,7 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E88E_PID, 0x400, 0xffff) },
 	{ USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E88F_PID, 0x400, 0xffff) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ELV_UO100_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_UM100_PID) },
  	{ USB_DEVICE_VER(FTDI_VID, LINX_SDMUSBQSS_PID, 0x400, 0xffff) },
  	{ USB_DEVICE_VER(FTDI_VID, LINX_MASTERDEVEL2_PID, 0x400, 0xffff) },
  	{ USB_DEVICE_VER(FTDI_VID, LINX_FUTURE_0_PID, 0x400, 0xffff) },

drivers/usb/serial/ftdi_sio.h

@@ -144,6 +144,8 @@
 
 /* ELV USB Module UO100 (PID sent by Stefan Frings) */
 #define FTDI_ELV_UO100_PID	0xFB58	/* Product Id */
+/* ELV USB Module UM100 (PID sent by Arnim Laeuger) */
+#define FTDI_ELV_UM100_PID	0xFB5A	/* Product Id */
 
 /*
  * Definitions for ID TECH (www.idt-net.com) devices

drivers/usb/serial/usb-serial.c

@@ -1297,13 +1297,6 @@ static int __init usb_serial_init(void)
 		goto exit_bus;
 	}
 
-	/* register the generic driver, if we should */
-	result = usb_serial_generic_register(debug);
-	if (result < 0) {
-		err("%s - registering generic driver failed", __FUNCTION__);
-		goto exit_generic;
-	}
-
 	usb_serial_tty_driver->owner = THIS_MODULE;
 	usb_serial_tty_driver->driver_name = "usbserial";
 	usb_serial_tty_driver->devfs_name = "usb/tts/";
@@ -1329,17 +1322,24 @@ static int __init usb_serial_init(void)
 		goto exit_tty;
 	}
 
+	/* register the generic driver, if we should */
+	result = usb_serial_generic_register(debug);
+	if (result < 0) {
+		err("%s - registering generic driver failed", __FUNCTION__);
+		goto exit_generic;
+	}
+
 	info(DRIVER_DESC " " DRIVER_VERSION);
 
 	return result;
 
+exit_generic:
+	usb_deregister(&usb_serial_driver);
+
 exit_tty:
 	tty_unregister_driver(usb_serial_tty_driver);
 
 exit_reg_driver:
-	usb_serial_generic_deregister();
-
-exit_generic:
 	bus_unregister(&usb_serial_bus_type);
 
 exit_bus:

fs/proc/proc_devtree.c

@@ -12,15 +12,8 @@
 #include <asm/uaccess.h>
 
 #ifndef HAVE_ARCH_DEVTREE_FIXUPS
-static inline void set_node_proc_entry(struct device_node *np, struct proc_dir_entry *de)
-{
-}
-
-static void inline set_node_name_link(struct device_node *np, struct proc_dir_entry *de)
-{
-}
-
-static void inline set_node_addr_link(struct device_node *np, struct proc_dir_entry *de)
+static inline void set_node_proc_entry(struct device_node *np,
+				       struct proc_dir_entry *de)
 {
 }
 #endif
@@ -58,89 +51,67 @@ static int property_read_proc(char *page, char **start, off_t off,
 /*
  * Process a node, adding entries for its children and its properties.
  */
-void proc_device_tree_add_node(struct device_node *np, struct proc_dir_entry *de)
+void proc_device_tree_add_node(struct device_node *np,
+			       struct proc_dir_entry *de)
 {
 	struct property *pp;
 	struct proc_dir_entry *ent;
-	struct device_node *child, *sib;
-	const char *p, *at;
-	int l;
-	struct proc_dir_entry *list, **lastp, *al;
+	struct device_node *child;
+	struct proc_dir_entry *list = NULL, **lastp;
+	const char *p;
 
 	set_node_proc_entry(np, de);
 	lastp = &list;
-	for (pp = np->properties; pp != 0; pp = pp->next) {
-		/*
-		 * Unfortunately proc_register puts each new entry
-		 * at the beginning of the list.  So we rearrange them.
-		 */
-		ent = create_proc_read_entry(pp->name, strncmp(pp->name, "security-", 9) ?
-					     S_IRUGO : S_IRUSR, de, property_read_proc, pp);
-		if (ent == 0)
-			break;
-		if (!strncmp(pp->name, "security-", 9))
-		     ent->size = 0; /* don't leak number of password chars */
-		else
-		     ent->size = pp->length;
-		*lastp = ent;
-		lastp = &ent->next;
-	}
-	child = NULL;
-	while ((child = of_get_next_child(np, child))) {
+	for (child = NULL; (child = of_get_next_child(np, child));) {
 		p = strrchr(child->full_name, '/');
 		if (!p)
 			p = child->full_name;
 		else
 			++p;
-		/* chop off '@0' if the name ends with that */
-		l = strlen(p);
-		if (l > 2 && p[l-2] == '@' && p[l-1] == '0')
-			l -= 2;
 		ent = proc_mkdir(p, de);
 		if (ent == 0)
 			break;
 		*lastp = ent;
+		ent->next = NULL;
 		lastp = &ent->next;
 		proc_device_tree_add_node(child, ent);
-
-		/*
-		 * If we left the address part on the name, consider
-		 * adding symlinks from the name and address parts.
-		 */
-		if (p[l] != 0 || (at = strchr(p, '@')) == 0)
-			continue;
-
+	}
+	of_node_put(child);
+	for (pp = np->properties; pp != 0; pp = pp->next) {
 		/*
-		 * If this is the first node with a given name property,
-		 * add a symlink with the name property as its name.
+		 * Yet another Apple device-tree bogosity: on some machines,
+		 * they have properties & nodes with the same name. Those
+		 * properties are quite unimportant for us though, thus we
+		 * simply "skip" them here, but we do have to check.
 		 */
-		sib = NULL;
-		while ((sib = of_get_next_child(np, sib)) && sib != child)
-			if (sib->name && strcmp(sib->name, child->name) == 0)
-				break;
-		if (sib == child && strncmp(p, child->name, l) != 0) {
-			al = proc_symlink(child->name, de, ent->name);
-			if (al == 0) {
-				of_node_put(sib);
+		for (ent = list; ent != NULL; ent = ent->next)
+			if (!strcmp(ent->name, pp->name))
 				break;
+		if (ent != NULL) {
+			printk(KERN_WARNING "device-tree: property \"%s\" name"
+			       " conflicts with node in %s\n", pp->name,
+			       np->full_name);
+			continue;
 		}
-			set_node_name_link(child, al);
-			*lastp = al;
-			lastp = &al->next;
-		}
-		of_node_put(sib);
+
 		/*
-		 * Add another directory with the @address part as its name.
+		 * Unfortunately proc_register puts each new entry
+		 * at the beginning of the list.  So we rearrange them.
 		 */
-		al = proc_symlink(at, de, ent->name);
-		if (al == 0)
+		ent = create_proc_read_entry(pp->name,
+					     strncmp(pp->name, "security-", 9)
+					     ? S_IRUGO : S_IRUSR, de,
+					     property_read_proc, pp);
+		if (ent == 0)
 			break;
-		set_node_addr_link(child, al);
-		*lastp = al;
-		lastp = &al->next;
+		if (!strncmp(pp->name, "security-", 9))
+		     ent->size = 0; /* don't leak number of password chars */
+		else
+		     ent->size = pp->length;
+		ent->next = NULL;
+		*lastp = ent;
+		lastp = &ent->next;
 	}
-	of_node_put(child);
-	*lastp = NULL;
 	de->subdir = list;
 }
 

fs/udf/udftime.c

@@ -46,7 +46,7 @@
 #endif
 
 /* How many days come before each month (0-12).  */
-const unsigned short int __mon_yday[2][13] =
+static const unsigned short int __mon_yday[2][13] =
 {
 	/* Normal years.  */
 	{ 0, 31, 59, 90, 120, 151, 181, 212, 243, 273, 304, 334, 365 },

include/asm-i386/timer.h

@@ -53,6 +53,7 @@ extern struct init_timer_opts timer_cyclone_init;
 
 extern unsigned long calibrate_tsc(void);
 extern void init_cpu_khz(void);
+extern int recalibrate_cpu_khz(void);
 #ifdef CONFIG_HPET_TIMER
 extern struct init_timer_opts timer_hpet_init;
 extern unsigned long calibrate_tsc_hpet(unsigned long *tsc_hpet_quotient_ptr);

include/asm-ppc64/prom.h

@@ -148,8 +148,6 @@ struct device_node {
 	struct	device_node *next;	/* next device of same type */
 	struct	device_node *allnext;	/* next in list of all nodes */
 	struct  proc_dir_entry *pde;	/* this node's proc directory */
-	struct  proc_dir_entry *name_link; /* name symlink */
-	struct  proc_dir_entry *addr_link; /* addr symlink */
 	struct  kref kref;
 	unsigned long _flags;
 };
@@ -174,15 +172,6 @@ static inline void set_node_proc_entry(struct device_node *dn, struct proc_dir_e
 	dn->pde = de;
 }
 
-static void inline set_node_name_link(struct device_node *dn, struct proc_dir_entry *de)
-{
-	dn->name_link = de;
-}
-
-static void inline set_node_addr_link(struct device_node *dn, struct proc_dir_entry *de)
-{
-	dn->addr_link = de;
-}
 
 /* OBSOLETE: Old stlye node lookup */
 extern struct device_node *find_devices(const char *name);

include/linux/cpufreq.h

@@ -49,7 +49,7 @@ int cpufreq_unregister_notifier(struct notifier_block *nb, unsigned int list);
 /* Frequency values here are CPU kHz so that hardware which doesn't run 
  * with some frequencies can complain without having to guess what per 
  * cent / per mille means. 
- * Maximum transition latency is in microseconds - if it's unknown,
+ * Maximum transition latency is in nanoseconds - if it's unknown,
  * CPUFREQ_ETERNAL shall be used.
  */
 

include/linux/pci_ids.h

@@ -1230,6 +1230,12 @@
 #define PCI_DEVICE_ID_NVIDIA_QUADRO4_900XGL	0x0258
 #define PCI_DEVICE_ID_NVIDIA_QUADRO4_750XGL	0x0259
 #define PCI_DEVICE_ID_NVIDIA_QUADRO4_700XGL	0x025B
+#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_IDE	0x0265
+#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA	0x0266
+#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA2	0x0267
+#define PCI_DEVICE_ID_NVIDIA_NVENET_12		0x0268
+#define PCI_DEVICE_ID_NVIDIA_NVENET_13		0x0269
+#define PCI_DEVICE_ID_NVIDIA_MCP51_AUDIO	0x026B
 #define PCI_DEVICE_ID_NVIDIA_GEFORCE4_TI_4800	0x0280
 #define PCI_DEVICE_ID_NVIDIA_GEFORCE4_TI_4800_8X    0x0281
 #define PCI_DEVICE_ID_NVIDIA_GEFORCE4_TI_4800SE     0x0282

kernel/module.c

@@ -1758,6 +1758,7 @@ sys_init_module(void __user *umod,
 		const char __user *uargs)
 {
 	struct module *mod;
+	mm_segment_t old_fs = get_fs();
 	int ret = 0;
 
 	/* Must have permission */
@@ -1775,6 +1776,9 @@ sys_init_module(void __user *umod,
 		return PTR_ERR(mod);
 	}
 
+	/* flush the icache in correct context */
+	set_fs(KERNEL_DS);
+
 	/* Flush the instruction cache, since we've played with text */
 	if (mod->module_init)
 		flush_icache_range((unsigned long)mod->module_init,
@@ -1783,6 +1787,8 @@ sys_init_module(void __user *umod,
 	flush_icache_range((unsigned long)mod->module_core,
 			   (unsigned long)mod->module_core + mod->core_size);
 
+	set_fs(old_fs);
+
 	/* Now sew it into the lists.  They won't access us, since
            strong_try_module_get() will fail. */
 	stop_machine_run(__link_module, mod, NR_CPUS);