Commit 0905780a authored by Maciej W. Rozycki's avatar Maciej W. Rozycki Committed by Ralf Baechle

[MIPS] zs.c: Resurrect the deceased zs.c for now.

Not that it's meant to be sustained for long, but from time to time it's
useful to have some console...
Signed-off-by: default avatarMaciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
parent e0c9b797
......@@ -6,7 +6,7 @@
*
* DECstation changes
* Copyright (C) 1998-2000 Harald Koerfgen
* Copyright (C) 2000, 2001, 2002, 2003, 2004 Maciej W. Rozycki
* Copyright (C) 2000, 2001, 2002, 2003, 2004, 2005 Maciej W. Rozycki
*
* For the rest of the code the original Copyright applies:
* Copyright (C) 1996 Paul Mackerras (Paul.Mackerras@cs.anu.edu.au)
......@@ -55,6 +55,7 @@
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/spinlock.h>
#ifdef CONFIG_SERIAL_DEC_CONSOLE
#include <linux/console.h>
#endif
......@@ -63,7 +64,6 @@
#include <asm/pgtable.h>
#include <asm/irq.h>
#include <asm/system.h>
#include <asm/uaccess.h>
#include <asm/bootinfo.h>
#include <asm/dec/interrupts.h>
......@@ -128,6 +128,8 @@ static struct zs_parms ds_parms = {
#define BUS_PRESENT (DS_BUS_PRESENT)
DEFINE_SPINLOCK(zs_lock);
struct dec_zschannel zs_channels[NUM_CHANNELS];
struct dec_serial zs_soft[NUM_CHANNELS];
int zs_channels_found;
......@@ -159,8 +161,6 @@ static unsigned char zs_init_regs[16] __initdata = {
0 /* write 15 */
};
DECLARE_TASK_QUEUE(tq_zs_serial);
static struct tty_driver *serial_driver;
/* serial subtype definitions */
......@@ -294,8 +294,7 @@ static inline void zs_rtsdtr(struct dec_serial *info, int which, int set)
{
unsigned long flags;
save_flags(flags); cli();
spin_lock_irqsave(&zs_lock, flags);
if (info->zs_channel != info->zs_chan_a) {
if (set) {
info->zs_chan_a->curregs[5] |= (which & (RTS | DTR));
......@@ -304,7 +303,7 @@ static inline void zs_rtsdtr(struct dec_serial *info, int which, int set)
}
write_zsreg(info->zs_chan_a, 5, info->zs_chan_a->curregs[5]);
}
restore_flags(flags);
spin_unlock_irqrestore(&zs_lock, flags);
}
/* Utility routines for the Zilog */
......@@ -345,12 +344,10 @@ static inline void rs_recv_clear(struct dec_zschannel *zsc)
* This routine is used by the interrupt handler to schedule
* processing in the software interrupt portion of the driver.
*/
static _INLINE_ void rs_sched_event(struct dec_serial *info,
int event)
static _INLINE_ void rs_sched_event(struct dec_serial *info, int event)
{
info->event |= 1 << event;
queue_task(&info->tqueue, &tq_zs_serial);
mark_bh(SERIAL_BH);
tasklet_schedule(&info->tlet);
}
static _INLINE_ void receive_chars(struct dec_serial *info,
......@@ -497,9 +494,10 @@ static _INLINE_ void status_handle(struct dec_serial *info)
/*
* This is the serial driver's generic interrupt routine
*/
void rs_interrupt(int irq, void *dev_id, struct pt_regs * regs)
static irqreturn_t rs_interrupt(int irq, void *dev_id, struct pt_regs *regs)
{
struct dec_serial *info = (struct dec_serial *) dev_id;
irqreturn_t status = IRQ_NONE;
unsigned char zs_intreg;
int shift;
......@@ -521,6 +519,8 @@ void rs_interrupt(int irq, void *dev_id, struct pt_regs * regs)
if ((zs_intreg & CHAN_IRQMASK) == 0)
break;
status = IRQ_HANDLED;
if (zs_intreg & CHBRxIP) {
receive_chars(info, regs);
}
......@@ -534,6 +534,8 @@ void rs_interrupt(int irq, void *dev_id, struct pt_regs * regs)
/* Why do we need this ? */
write_zsreg(info->zs_channel, 0, RES_H_IUS);
return status;
}
#ifdef ZS_DEBUG_REGS
......@@ -578,12 +580,12 @@ static void rs_stop(struct tty_struct *tty)
return;
#if 1
save_flags(flags); cli();
spin_lock_irqsave(&zs_lock, flags);
if (info->zs_channel->curregs[5] & TxENAB) {
info->zs_channel->curregs[5] &= ~TxENAB;
write_zsreg(info->zs_channel, 5, info->zs_channel->curregs[5]);
}
restore_flags(flags);
spin_unlock_irqrestore(&zs_lock, flags);
#endif
}
......@@ -595,7 +597,7 @@ static void rs_start(struct tty_struct *tty)
if (serial_paranoia_check(info, tty->name, "rs_start"))
return;
save_flags(flags); cli();
spin_lock_irqsave(&zs_lock, flags);
#if 1
if (info->xmit_cnt && info->xmit_buf && !(info->zs_channel->curregs[5] & TxENAB)) {
info->zs_channel->curregs[5] |= TxENAB;
......@@ -606,7 +608,7 @@ static void rs_start(struct tty_struct *tty)
transmit_chars(info);
}
#endif
restore_flags(flags);
spin_unlock_irqrestore(&zs_lock, flags);
}
/*
......@@ -618,12 +620,8 @@ static void rs_start(struct tty_struct *tty)
* interrupt driver proper are done; the interrupt driver schedules
* them using rs_sched_event(), and they get done here.
*/
static void do_serial_bh(void)
{
run_task_queue(&tq_zs_serial);
}
static void do_softint(void *private_)
static void do_softint(unsigned long private_)
{
struct dec_serial *info = (struct dec_serial *) private_;
struct tty_struct *tty;
......@@ -634,10 +632,11 @@ static void do_softint(void *private_)
if (test_and_clear_bit(RS_EVENT_WRITE_WAKEUP, &info->event)) {
tty_wakeup(tty);
wake_up_interruptible(&tty->write_wait);
}
}
int zs_startup(struct dec_serial * info)
static int zs_startup(struct dec_serial * info)
{
unsigned long flags;
......@@ -650,7 +649,7 @@ int zs_startup(struct dec_serial * info)
return -ENOMEM;
}
save_flags(flags); cli();
spin_lock_irqsave(&zs_lock, flags);
#ifdef SERIAL_DEBUG_OPEN
printk("starting up ttyS%d (irq %d)...", info->line, info->irq);
......@@ -706,7 +705,7 @@ int zs_startup(struct dec_serial * info)
info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
info->flags |= ZILOG_INITIALIZED;
restore_flags(flags);
spin_unlock_irqrestore(&zs_lock, flags);
return 0;
}
......@@ -726,7 +725,7 @@ static void shutdown(struct dec_serial * info)
info->irq);
#endif
save_flags(flags); cli(); /* Disable interrupts */
spin_lock_irqsave(&zs_lock, flags);
if (info->xmit_buf) {
free_page((unsigned long) info->xmit_buf);
......@@ -749,7 +748,7 @@ static void shutdown(struct dec_serial * info)
set_bit(TTY_IO_ERROR, &info->tty->flags);
info->flags &= ~ZILOG_INITIALIZED;
restore_flags(flags);
spin_unlock_irqrestore(&zs_lock, flags);
}
/*
......@@ -785,7 +784,7 @@ static void change_speed(struct dec_serial *info)
i += 15;
}
save_flags(flags); cli();
spin_lock_irqsave(&zs_lock, flags);
info->zs_baud = baud_table[i];
if (info->zs_baud) {
brg = BPS_TO_BRG(info->zs_baud, zs_parms->clock/info->clk_divisor);
......@@ -858,7 +857,7 @@ static void change_speed(struct dec_serial *info)
/* Load up the new values */
load_zsregs(info->zs_channel, info->zs_channel->curregs);
restore_flags(flags);
spin_unlock_irqrestore(&zs_lock, flags);
}
static void rs_flush_chars(struct tty_struct *tty)
......@@ -874,9 +873,9 @@ static void rs_flush_chars(struct tty_struct *tty)
return;
/* Enable transmitter */
save_flags(flags); cli();
spin_lock_irqsave(&zs_lock, flags);
transmit_chars(info);
restore_flags(flags);
spin_unlock_irqrestore(&zs_lock, flags);
}
static int rs_write(struct tty_struct * tty,
......@@ -892,26 +891,17 @@ static int rs_write(struct tty_struct * tty,
if (!tty || !info->xmit_buf)
return 0;
save_flags(flags);
while (1) {
cli();
spin_lock_irqsave(&zs_lock, flags);
c = min(count, min(SERIAL_XMIT_SIZE - info->xmit_cnt - 1,
SERIAL_XMIT_SIZE - info->xmit_head));
if (c <= 0)
break;
if (from_user) {
down(&tmp_buf_sem);
copy_from_user(tmp_buf, buf, c);
c = min(c, min(SERIAL_XMIT_SIZE - info->xmit_cnt - 1,
SERIAL_XMIT_SIZE - info->xmit_head));
memcpy(info->xmit_buf + info->xmit_head, tmp_buf, c);
up(&tmp_buf_sem);
} else
memcpy(info->xmit_buf + info->xmit_head, buf, c);
memcpy(info->xmit_buf + info->xmit_head, buf, c);
info->xmit_head = (info->xmit_head + c) & (SERIAL_XMIT_SIZE-1);
info->xmit_cnt += c;
restore_flags(flags);
spin_unlock_irqrestore(&zs_lock, flags);
buf += c;
count -= c;
total += c;
......@@ -920,7 +910,7 @@ static int rs_write(struct tty_struct * tty,
if (info->xmit_cnt && !tty->stopped && !info->tx_stopped
&& !info->tx_active)
transmit_chars(info);
restore_flags(flags);
spin_unlock_irqrestore(&zs_lock, flags);
return total;
}
......@@ -952,9 +942,9 @@ static void rs_flush_buffer(struct tty_struct *tty)
if (serial_paranoia_check(info, tty->name, "rs_flush_buffer"))
return;
cli();
spin_lock_irq(&zs_lock);
info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
sti();
spin_unlock_irq(&zs_lock);
tty_wakeup(tty);
}
......@@ -982,11 +972,11 @@ static void rs_throttle(struct tty_struct * tty)
return;
if (I_IXOFF(tty)) {
save_flags(flags); cli();
spin_lock_irqsave(&zs_lock, flags);
info->x_char = STOP_CHAR(tty);
if (!info->tx_active)
transmit_chars(info);
restore_flags(flags);
spin_unlock_irqrestore(&zs_lock, flags);
}
if (C_CRTSCTS(tty)) {
......@@ -1010,7 +1000,7 @@ static void rs_unthrottle(struct tty_struct * tty)
return;
if (I_IXOFF(tty)) {
save_flags(flags); cli();
spin_lock_irqsave(&zs_lock, flags);
if (info->x_char)
info->x_char = 0;
else {
......@@ -1018,7 +1008,7 @@ static void rs_unthrottle(struct tty_struct * tty)
if (!info->tx_active)
transmit_chars(info);
}
restore_flags(flags);
spin_unlock_irqrestore(&zs_lock, flags);
}
if (C_CRTSCTS(tty)) {
......@@ -1111,9 +1101,9 @@ static int get_lsr_info(struct dec_serial * info, unsigned int *value)
{
unsigned char status;
cli();
spin_lock(&zs_lock);
status = read_zsreg(info->zs_channel, 0);
sti();
spin_unlock_irq(&zs_lock);
put_user(status,value);
return 0;
}
......@@ -1136,11 +1126,11 @@ static int rs_tiocmget(struct tty_struct *tty, struct file *file)
if (info->zs_channel == info->zs_chan_a)
result = 0;
else {
cli();
spin_lock(&zs_lock);
control = info->zs_chan_a->curregs[5];
status_a = read_zsreg(info->zs_chan_a, 0);
status_b = read_zsreg(info->zs_channel, 0);
sti();
spin_unlock_irq(&zs_lock);
result = ((control & RTS) ? TIOCM_RTS: 0)
| ((control & DTR) ? TIOCM_DTR: 0)
| ((status_b & DCD) ? TIOCM_CAR: 0)
......@@ -1155,8 +1145,6 @@ static int rs_tiocmset(struct tty_struct *tty, struct file *file,
unsigned int set, unsigned int clear)
{
struct dec_serial * info = (struct dec_serial *)tty->driver_data;
int error;
unsigned int arg, bits;
if (info->hook)
return -ENODEV;
......@@ -1170,8 +1158,7 @@ static int rs_tiocmset(struct tty_struct *tty, struct file *file,
if (info->zs_channel == info->zs_chan_a)
return 0;
get_user(arg, value);
cli();
spin_lock(&zs_lock);
if (set & TIOCM_RTS)
info->zs_chan_a->curregs[5] |= RTS;
if (set & TIOCM_DTR)
......@@ -1181,7 +1168,7 @@ static int rs_tiocmset(struct tty_struct *tty, struct file *file,
if (clear & TIOCM_DTR)
info->zs_chan_a->curregs[5] &= ~DTR;
write_zsreg(info->zs_chan_a, 5, info->zs_chan_a->curregs[5]);
sti();
spin_unlock_irq(&zs_lock);
return 0;
}
......@@ -1198,19 +1185,18 @@ static void rs_break(struct tty_struct *tty, int break_state)
if (!info->port)
return;
save_flags(flags); cli();
spin_lock_irqsave(&zs_lock, flags);
if (break_state == -1)
info->zs_channel->curregs[5] |= SND_BRK;
else
info->zs_channel->curregs[5] &= ~SND_BRK;
write_zsreg(info->zs_channel, 5, info->zs_channel->curregs[5]);
restore_flags(flags);
spin_unlock_irqrestore(&zs_lock, flags);
}
static int rs_ioctl(struct tty_struct *tty, struct file * file,
unsigned int cmd, unsigned long arg)
{
int error;
struct dec_serial * info = (struct dec_serial *)tty->driver_data;
if (info->hook)
......@@ -1287,10 +1273,10 @@ static void rs_close(struct tty_struct *tty, struct file * filp)
if (!info || serial_paranoia_check(info, tty->name, "rs_close"))
return;
save_flags(flags); cli();
spin_lock_irqsave(&zs_lock, flags);
if (tty_hung_up_p(filp)) {
restore_flags(flags);
spin_unlock_irqrestore(&zs_lock, flags);
return;
}
......@@ -1315,7 +1301,7 @@ static void rs_close(struct tty_struct *tty, struct file * filp)
info->count = 0;
}
if (info->count) {
restore_flags(flags);
spin_unlock_irqrestore(&zs_lock, flags);
return;
}
info->flags |= ZILOG_CLOSING;
......@@ -1358,7 +1344,7 @@ static void rs_close(struct tty_struct *tty, struct file * filp)
}
info->flags &= ~(ZILOG_NORMAL_ACTIVE|ZILOG_CLOSING);
wake_up_interruptible(&info->close_wait);
restore_flags(flags);
spin_unlock_irqrestore(&zs_lock, flags);
}
/*
......@@ -1398,7 +1384,7 @@ static void rs_wait_until_sent(struct tty_struct *tty, int timeout)
/*
* rs_hangup() --- called by tty_hangup() when a hangup is signaled.
*/
void rs_hangup(struct tty_struct *tty)
static void rs_hangup(struct tty_struct *tty)
{
struct dec_serial * info = (struct dec_serial *)tty->driver_data;
......@@ -1466,16 +1452,16 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp,
printk("block_til_ready before block: ttyS%d, count = %d\n",
info->line, info->count);
#endif
cli();
spin_lock(&zs_lock);
if (!tty_hung_up_p(filp))
info->count--;
sti();
spin_unlock_irq(&zs_lock);
info->blocked_open++;
while (1) {
cli();
spin_lock(&zs_lock);
if (tty->termios->c_cflag & CBAUD)
zs_rtsdtr(info, RTS | DTR, 1);
sti();
spin_unlock_irq(&zs_lock);
set_current_state(TASK_INTERRUPTIBLE);
if (tty_hung_up_p(filp) ||
!(info->flags & ZILOG_INITIALIZED)) {
......@@ -1523,7 +1509,7 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp,
* the IRQ chain. It also performs the serial-specific
* initialization for the tty structure.
*/
int rs_open(struct tty_struct *tty, struct file * filp)
static int rs_open(struct tty_struct *tty, struct file * filp)
{
struct dec_serial *info;
int retval, line;
......@@ -1706,7 +1692,7 @@ static void __init probe_sccs(void)
}
}
save_and_cli(flags);
spin_lock_irqsave(&zs_lock, flags);
for (n = 0; n < zs_channels_found; n++) {
if (n % 2 == 0) {
write_zsreg(zs_soft[n].zs_chan_a, R9, FHWRES);
......@@ -1716,7 +1702,7 @@ static void __init probe_sccs(void)
load_zsregs(zs_soft[n].zs_channel,
zs_soft[n].zs_channel->curregs);
}
restore_flags(flags);
spin_unlock_irqrestore(&zs_lock, flags);
}
static struct tty_operations serial_ops = {
......@@ -1749,9 +1735,6 @@ int __init zs_init(void)
if(!BUS_PRESENT)
return -ENODEV;
/* Setup base handler, and timer table. */
init_bh(SERIAL_BH, do_serial_bh);
/* Find out how many Z8530 SCCs we have */
if (zs_chain == 0)
probe_sccs();
......@@ -1800,8 +1783,7 @@ int __init zs_init(void)
info->event = 0;
info->count = 0;
info->blocked_open = 0;
info->tqueue.routine = do_softint;
info->tqueue.data = info;
tasklet_init(&info->tlet, do_softint, (unsigned long)info);
init_waitqueue_head(&info->open_wait);
init_waitqueue_head(&info->close_wait);
printk("ttyS%02d at 0x%08x (irq = %d) is a Z85C30 SCC\n",
......@@ -1833,8 +1815,7 @@ int __init zs_init(void)
/*
* polling I/O routines
*/
static int
zs_poll_tx_char(void *handle, unsigned char ch)
static int zs_poll_tx_char(void *handle, unsigned char ch)
{
struct dec_serial *info = handle;
struct dec_zschannel *chan = info->zs_channel;
......@@ -1857,8 +1838,7 @@ zs_poll_tx_char(void *handle, unsigned char ch)
return -ENODEV;
}
static int
zs_poll_rx_char(void *handle)
static int zs_poll_rx_char(void *handle)
{
struct dec_serial *info = handle;
struct dec_zschannel *chan = info->zs_channel;
......@@ -2037,7 +2017,7 @@ static int __init serial_console_setup(struct console *co, char *options)
}
co->cflag = cflag;
save_and_cli(flags);
spin_lock_irqsave(&zs_lock, flags);
/*
* Set up the baud rate generator.
......@@ -2092,7 +2072,7 @@ static int __init serial_console_setup(struct console *co, char *options)
zs_soft[co->index].clk_divisor = clk_divisor;
zs_soft[co->index].zs_baud = get_zsbaud(&zs_soft[co->index]);
restore_flags(flags);
spin_unlock_irqrestore(&zs_lock, flags);
return 0;
}
......@@ -2229,5 +2209,3 @@ void __init zs_kgdb_hook(int tty_num)
set_debug_traps(); /* init stub */
}
#endif /* ifdef CONFIG_KGDB */
......@@ -6,14 +6,14 @@
*
* Copyright (C) 1996 Paul Mackerras (Paul.Mackerras@cs.anu.edu.au)
* Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
* Copyright (C) 2004 Maciej W. Rozycki
* Copyright (C) 2004, 2005 Maciej W. Rozycki
*/
#ifndef _DECSERIAL_H
#define _DECSERIAL_H
#include <asm/dec/serial.h>
#define NUM_ZSREGS 16
#define NUM_ZSREGS 16
struct serial_struct {
int type;
......@@ -139,8 +139,7 @@ struct dec_serial {
int xmit_head;
int xmit_tail;
int xmit_cnt;
struct tq_struct tqueue;
struct tq_struct tqueue_hangup;
struct tasklet_struct tlet;
wait_queue_head_t open_wait;
wait_queue_head_t close_wait;
};
......@@ -282,7 +281,7 @@ struct dec_serial {
#define DLC 4 /* Disable Lower Chain */
#define MIE 8 /* Master Interrupt Enable */
#define STATHI 0x10 /* Status high */
#define SOFTACK 0x20 /* Software Interrupt Acknowledge */
#define SOFTACK 0x20 /* Software Interrupt Acknowledge */
#define NORESET 0 /* No reset on write to R9 */
#define CHRB 0x40 /* Reset channel B */
#define CHRA 0x80 /* Reset channel A */
......@@ -395,8 +394,8 @@ struct dec_serial {
/* Read Register 15 (value of WR 15) */
/* Misc macros */
#define ZS_CLEARERR(channel) (write_zsreg(channel, 0, ERR_RES))
#define ZS_CLEARFIFO(channel) do { volatile unsigned char garbage; \
#define ZS_CLEARERR(channel) (write_zsreg(channel, 0, ERR_RES))
#define ZS_CLEARFIFO(channel) do { volatile unsigned char garbage; \
garbage = read_zsdata(channel); \
garbage = read_zsdata(channel); \
garbage = read_zsdata(channel); \
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment